KayOneX-24 Posted October 23, 2015 Share Posted October 23, 2015 Hi guys, I've got a weird issue in BF4 since the last days when the big cloud update has been released. It has to do with the built-in ping assist of my R1. I haven't changed anything in my setup (modem/gateway, router, r1 config) or in my settings (r1: geofilter, pa). I have set my gf to 400km with ping assist @ 40ms. Even if the server has a ping of 30ms the ping assist will block that server and prevent me from joining. When I set the ping assist up to 150ms I can join a server with 30ms. Unfortunately, I can join high ping servers in the US with the same ping assist value. Has someone any similar issues ? BTW: The ping diagnostics look pretty normal: Good, Exceptional, Exceptional, No Loss The CC is @ 70 down, 70 up. Strict mode is ticked. Thanks in advance. Yours, KayOneX-24 Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted October 23, 2015 Administrators Share Posted October 23, 2015 Ping assist sometimes might not detect some servers as under the ping limit when it actually pings it as it may be over at the time, its more to assist & with your radius quite small it has to work a bit harder. Try putting PA to around 50ms to give it a bit more room to help & then will block out the US too Link to comment Share on other sites More sharing options...
KayOneX-24 Posted October 23, 2015 Author Share Posted October 23, 2015 Hi Fraser, thank you. I'm going to try that. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.