nicola Posted June 12 Share Posted June 12 Salve, stavo provando a testare la mia rete interna e ho notato che quando provo un ping dal pc al modem isp passando per il netduma ho qualche picco di latenza. Mediamente la latenza è intorno al 1 o 2 ms ma si verificano a volte picchi di 8ms, 10ms o più (vedi foto) ho ripetuto la procedura collegando solo il pc al modem isp e non ho riscontrato nemmeno una volta questi picchi (vedi foto) inoltre ho provato anche a collegare un netgear a cascata sul modem isp e anche in questo caso non ho riscontrato questi picchi (vedi foto) ho provato inoltre anche a sostituire tutti i cavi ethernet ma i risultati sono rimasti invariati praticamente questi picchi li vedo solo quando è collegato il netduma al modem isp vorrei semplicemente capire se tutto ciò è normale oppure se andrà ad influire sulla rete, in questo caso è possibile risolvere in qualche modo? ovviamente il firmware è aggiornato all'ultima versione e ho già provato a fare reset e riavvio ma i risultati sono rimasti invariati grazie mille allego foto dei vari test Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted June 12 Administrators Share Posted June 12 What is the model of the modem/router the R3 is connected to and how have you set that to ensure all traffic flows to the R3? E.g R3 in its DMZ, modem/bridge mode Are ALL devices connected to the R3? Link to comment Share on other sites More sharing options...
nicola Posted June 12 Author Share Posted June 12 ciao, grazie per la celere risposta. il modello del modem isp è un huawey eg8145b7n-50 l'r3 l'ho solo collegato all'huawey senza andare a modificare nulla cosa mi consigli di fare a questo punto? si tutti i dispositivi in caso sono collegato all'r3 Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted June 12 Administrators Share Posted June 12 Put the R3 in its DMZ or enable modem/bridge mode on it so all traffic goes to the R3 without anything else impacting it then see if you get the same issue Link to comment Share on other sites More sharing options...
nicola Posted June 12 Author Share Posted June 12 va bene, proverò e vi aggiorno grazie mille Netduma Fraser 1 Link to comment Share on other sites More sharing options...
nicola Posted June 19 Author Share Posted June 19 Salve, Purtroppo anche mettendo r3 in dmz o in modem/bridge la situazione non cambia Avete altri consigli da darmi per risolvere? Penso che avere questi picchi da 8ms o 10ms nella rete interna non sia per niente una buona cosa Grazie mille Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted June 19 Administrators Share Posted June 19 Do the same test but with the R3 IP address, what do you get? Link to comment Share on other sites More sharing options...
nicola Posted June 19 Author Share Posted June 19 appena fatto solo verso r3 ho avuto picchi di 4 e 5 ms (foto) Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted June 19 Administrators Share Posted June 19 You said you changed the ethernet cables before, did that include the ones connected the devices to the R3? Check the other LAN ports with this test and see if you get the same results please Link to comment Share on other sites More sharing options...
nicola Posted June 19 Author Share Posted June 19 si ho provato a cambiare tutti i cavi ethernet diverse volte e il risultato è sempre lo stesso. ora ho fatto anche questo test su tutte le porte lan dell'r3 e noto sempre questi picchi tra i 6ms e i 10ms praticamente, dopo tutti i test che ho fatto, posso affermare che questi picchi li riscontro solo quando ho r3 collegato alla rete interna questo perchè, come da foto inizialmente inviate, ho provato a fare anche test senza r3 e con altro router a cascata (netgear) e non ho riscontro questi picchi Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted June 19 Administrators Share Posted June 19 Is this on the Early Access firmware .645? Link to comment Share on other sites More sharing options...
nicola Posted June 19 Author Share Posted June 19 Tutto ciò che ti ho elencato fin ora accadeva con l'aggiornamento precedente Oggi ho aggiornato al firmware.645 ma continuano ad esserci gli stessi problemi Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted June 19 Administrators Share Posted June 19 Could you factory reset now you've updated and just check again please? Link to comment Share on other sites More sharing options...
nicola Posted June 19 Author Share Posted June 19 Ciao, ho fatto reset di fabbrica e ho rifatto il test sempre gli stessi risultati (foto) Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted June 19 Administrators Share Posted June 19 Okay thank you, while performing the ping/when you notice a spike can you get the logs from the interface please? I can then pass them on to a dev to have a look Link to comment Share on other sites More sharing options...
nicola Posted June 19 Author Share Posted June 19 ok proverò a farlo e te li invio ti aggiorno grazie mille Netduma Fraser 1 Link to comment Share on other sites More sharing options...
nicola Posted June 19 Author Share Posted June 19 ciao, ho fatto il test del ping tra le 22:24 e le 22:27 ho avuto 3 picchi da 6ms 8 ms e 9ms durante questo test vi allego foto del test e file dei log di sistema R3_2025-06-19T20_27_23.269Z_logs.txt Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted June 19 Administrators Share Posted June 19 Thank you, that's perfect, by any chance have you disabled the option to allow ping in settings? Link to comment Share on other sites More sharing options...
nicola Posted June 19 Author Share Posted June 19 ciao se ti riferisci a questa (foto) è sempre stata abilitata Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted June 19 Administrators Share Posted June 19 Okay thank you, I'll pass it on! Link to comment Share on other sites More sharing options...
nicola Posted June 20 Author Share Posted June 20 Grazie mille Resto in attesa Netduma Fraser 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now