ewilliams8 Posted April 30 Share Posted April 30 I’m trying to use Home Assistant (on a separate VLAN) to send WoL packets to a device inside my R3’s LAN. The R3 is connected via WAN to my main Unifi network, and the target device has a static IP on the R3. WoL works perfectly from within the R3’s LAN, but I’m unable to wake the device via the R3’s WAN IP — even with a UDP port forward configured on port 9. The only way I’ve been able to make it work is by placing the target device in the R3’s DMZ, which functions but isn’t ideal. Does the R3 support forwarding inbound UDP traffic to LAN devices (including broadcast addresses)? Is there a way to define a static ARP entry or otherwise allow WoL packets through without relying on the DMZ? Any advice would be much appreciated. Link to comment Share on other sites More sharing options...
ewilliams8 Posted April 30 Author Share Posted April 30 Ignore this. I took it out of the DMZ and it's still working. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted May 1 Administrators Share Posted May 1 Glad to hear it's working now, I'll close the topic - thanks for providing an update! Link to comment Share on other sites More sharing options...
Recommended Posts