Administrators Netduma Fraser Posted January 23 Administrators Share Posted January 23 What firmware file did you use exactly? If you remove the rest of the URL so you just make it be routerlogin.net or 192.168.1.1 does it allow access? Can you access via the mobile app? Link to comment Share on other sites More sharing options...
steven101 Posted January 23 Author Share Posted January 23 v2.3.2.134 official from netgear for the xr500 only let's me log with the router index still I have put the beta back on to see if it works intermediary then rc 10 just to see if it works and now it let's me log in with the ip is there something about after upgrading to betta then downgrading I will try this again when I have time but it's strange it works when back to beta rc10 also noticed in the device manager there was nothing in the device table I should have took a picture but it's working now Link to comment Share on other sites More sharing options...
steven101 Posted January 23 Author Share Posted January 23 and add blocker is working again with rc10 what's going on with this router lol I bet if I resync the ad blocker it will stop working Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted January 23 Administrators Share Posted January 23 45 minutes ago, steven101 said: and add blocker is working again with rc10 what's going on with this router lol I bet if I resync the ad blocker it will stop working If you're not factory resetting after all these upgrades/downgrades it could cause issues, so stick with it for now, if you have an issue then reset and it should be better after that Link to comment Share on other sites More sharing options...
steven101 Posted January 23 Author Share Posted January 23 it was reset every time Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted January 23 Administrators Share Posted January 23 1 hour ago, steven101 said: it was reset every time It may not have upgraded/downgraded properly initially and re-doing it allowing for a proper install, continue to monitor it Link to comment Share on other sites More sharing options...
steven101 Posted January 23 Author Share Posted January 23 hi now I am getting this this was a new install and reset its rc 10 it says to switch to PC but doesn't I will try another browser and let you know just seems something has went totally wrong with the xr500 Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted January 23 Administrators Share Posted January 23 50 minutes ago, steven101 said: hi now I am getting this this was a new install and reset its rc 10 it says to switch to PC but doesn't I will try another browser and let you know just seems something has went totally wrong with the xr500 That's correct just click okay - it's because you're using the dumaweb URL which is for mobile devices Link to comment Share on other sites More sharing options...
steven101 Posted January 23 Author Share Posted January 23 hi I have reset it again to the 134 original version with a reset from back of router for 30 seconds waited 4 minutes then set it up but getting the same no such file or directory I can vidio me doing this process and post it with device manager not showing correctly and can't log in with ip again lol just want the original os on it but seems I am stuck with the beta this was a totally fresh install and then was reset when it was installed held for 30 seconds with pin then set back up am I doing this wrong ? Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted January 23 Administrators Share Posted January 23 Everything looks fine there, in regards to the Device Manager you've changed it to the table view in the menu you can change it back to the tree view there Link to comment Share on other sites More sharing options...
steven101 Posted yesterday at 05:48 PM Author Share Posted yesterday at 05:48 PM this router while in the geolocation on to the uk is setting the x box at 180 to 200 Ms which is causeing problems with rendering as it loads from online extreamly lagy games of cod even though it says 13 Ms on every game the other isp router works fine but without the qos which I want to use can you tell me why it makes my xbox when i run a test with geo it's 200ms and when it's off its 20ms and tell me how this would not impact lag in the game if that's what your going to say .??? Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted 6 hours ago Administrators Share Posted 6 hours ago 21 hours ago, steven101 said: this router while in the geolocation on to the uk is setting the x box at 180 to 200 Ms which is causeing problems with rendering as it loads from online extreamly lagy games of cod even though it says 13 Ms on every game the other isp router works fine but without the qos which I want to use can you tell me why it makes my xbox when i run a test with geo it's 200ms and when it's off its 20ms and tell me how this would not impact lag in the game if that's what your going to say .??? Are you referring to the network settings test? If so it's just the ping to the server it's using for the test/to authenticate you own the online game service. It doesn't impact your game experience because the servers for the game are completely different Link to comment Share on other sites More sharing options...
steven101 Posted 5 hours ago Author Share Posted 5 hours ago no it's the in the x box network test nothing to do with the game the network test on the x box normally sits at 960 Meg download 115 upload ping 18ms but when the geolocation is on its same speeds but the ping is over 200 ms this would impact on gameplay if the console itself has a ping over 200 but with no geolocation on its at 18 ms Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted 4 hours ago Administrators Share Posted 4 hours ago What I mentioned above applies - networking doesn't work that way, the connection to the game servers is independent of what the ping reports on the console network settings, one doesn't affect the other Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now