How to set up R3 with Fritz Box 6591

[Blumio]

Hi @Netduma Fraser,

I just take a look of different topic/problems which are other users had. There you often ask different things like PPPoE or IP6 on the Modem off and please set this on r3 to this and so on. My question do you have any instruction how to set up the modem (fritz Box --> Bridge Mode okay but other important things) and the R3 correct. Think this would be helpful  

[Netduma Fraser]

I don't know what your internet requirements are so it's hard for me to advise without that. Do you require PPPoE/VLAN etc for a connection? The easiest thing to do would be to put the R3 WAN IP (found on the WAN page) into the DMZ option on the fritz.

[Blumio]

So on fritz box there is no DMZ option. On their HP they are talking about Exposed Host. But if put the WAN IP  for IPv4 Adresse, it doesnt work. This is the only way I can put an IP inside on this page of fritz box

[Netduma Fraser]

The exposed host is the DMZ essentially - check the IP the fritz is giving the R3, is it the same IP you entered?

[Blumio]

Sorry for the stupid question but where can I see which IP the Fritz is giving to my R3 ?

 

Is this also correct ? 

 

[Netduma Fraser]

On the Fritz interface or on the R3 WAN page. I would remove the PC from the DMZ there as that is a major security risk. The IP you find on the WAN page put that in the exposed host option on the Fritz interface.