Administrators Netduma Fraser Posted February 15 Administrators Share Posted February 15 Could you get the logs again please as if it's not DHCP it should point to something else. Are you changing the Geo-Filter settings during play? If you do continue anyway does it let you in? Link to comment Share on other sites More sharing options...
Blumio Posted February 15 Author Share Posted February 15 9 hours ago, Blumio said: Lose connection again at ca. UTC 0:58... Also Geo Filtering didnt work again. After I do the 8 STeps you ecplain above it works but now it doesnt work.... R3_2025-02-15T00_59_50.051Z_logs_DHCP off.txt Link to comment Share on other sites More sharing options...
Blumio Posted February 15 Author Share Posted February 15 2 hours ago, Netduma Fraser said: Could you get the logs again please as if it's not DHCP it should point to something else. Are you changing the Geo-Filter settings during play? If you do continue anyway does it let you in? --> logs attached. --> No I dont change anything. After I see it is not working anymore, I delete the device and try to add again. Here I saw now that I can put the device twice. With the same name. Yes If I go on continue anyway the screen open and I can work on the inferface like nothing happened before Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted February 15 Administrators Share Posted February 15 18 minutes ago, Blumio said: --> logs attached. --> No I dont change anything. After I see it is not working anymore, I delete the device and try to add again. Here I saw now that I can put the device twice. With the same name. Yes If I go on continue anyway the screen open and I can work on the inferface like nothing happened before What settings have you done in an attempt to get an Open NAT? Link to comment Share on other sites More sharing options...
Blumio Posted February 15 Author Share Posted February 15 43 minutes ago, Netduma Fraser said: What settings have you done in an attempt to get an Open NAT? I open some ports but otherwise I dont do any specifically... All enable ports I deleted since 3 weeks or so. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted February 16 Administrators Share Posted February 16 1 hour ago, Blumio said: I open some ports but otherwise I dont do any specifically... All enable ports I deleted since 3 weeks or so. No internet rules, VPN, DMZ, static routes etc? Link to comment Share on other sites More sharing options...
Blumio Posted February 16 Author Share Posted February 16 nothing of that.... Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted Sunday at 08:45 AM Administrators Share Posted Sunday at 08:45 AM Could you take me through step by step what is happening between it working and not working please? No detail is too small Link to comment Share on other sites More sharing options...
Blumio Posted Sunday at 02:52 PM Author Share Posted Sunday at 02:52 PM 6 hours ago, Netduma Fraser said: Could you take me through step by step what is happening between it working and not working please? No detail is too small I hope this helps: I playing a round warzone on (PC1) and if the round is over the loading screen is there and nothing happend. 10 Sec later I got the inmformation lost the connection to blizzard server. Parallel I am talking with my friends on discord (PC2) but notice they cant hear me and then I lost the connection to discord also... then on both PCs you can see the symbol of the world for "no connection". TZhen I am waiting for maybe 3-5 min and then the connection is back and I also rejoin discord on the same channel before etc.... Then I can play the whole night mostly. SOmetime it happend again. But the pattern is always the same. Both PCs ayre connected via LAN. But I checked also with my smartphone Wifi and here the inmternet also not working Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted Sunday at 06:12 PM Administrators Share Posted Sunday at 06:12 PM 3 hours ago, Blumio said: I hope this helps: I playing a round warzone on (PC1) and if the round is over the loading screen is there and nothing happend. 10 Sec later I got the inmformation lost the connection to blizzard server. Parallel I am talking with my friends on discord (PC2) but notice they cant hear me and then I lost the connection to discord also... then on both PCs you can see the symbol of the world for "no connection". TZhen I am waiting for maybe 3-5 min and then the connection is back and I also rejoin discord on the same channel before etc.... Then I can play the whole night mostly. SOmetime it happend again. But the pattern is always the same. Both PCs ayre connected via LAN. But I checked also with my smartphone Wifi and here the inmternet also not working Thanks, so you're not changing any settings during that time? What is the model of the modem/router the R3 is connected to and how have you set that to ensure all traffic flows to the R3? E.g. R3 in its DMZ, modem/bridge mode Link to comment Share on other sites More sharing options...
Blumio Posted Sunday at 07:35 PM Author Share Posted Sunday at 07:35 PM 1 hour ago, Netduma Fraser said: Thanks, so you're not changing any settings during that time? What is the model of the modem/router the R3 is connected to and how have you set that to ensure all traffic flows to the R3? E.g. R3 in its DMZ, modem/bridge mode It the fritzbox 6591 cable. I put it in the bridge Mode and choose LAN2. Also Power Mode for this channel is active. Additional changes I didnt do. The router is supported by vodafone so some changes I cant do. Maybe I can call them tomorrow and told them my problem… Additional Info for you: Since I deactivate dhcp and got this problem after reboot the wlan didnt work correct. I can connect with my phone but didnt get the wifi symbo above (iphone). I see I didnt get ipv4. With the Wifi from the Router (fritz box) I see here ipv4 Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted Sunday at 08:30 PM Administrators Share Posted Sunday at 08:30 PM 53 minutes ago, Blumio said: It the fritzbox 6591 cable. I put it in the bridge Mode and choose LAN2. Also Power Mode for this channel is active. Additional changes I didnt do. The router is supported by vodafone so some changes I cant do. Maybe I can call them tomorrow and told them my problem… Additional Info for you: Since I deactivate dhcp and got this problem after reboot the wlan didnt work correct. I can connect with my phone but didnt get the wifi symbo above (iphone). I see I didnt get ipv4. With the Wifi from the Router (fritz box) I see here ipv4 What is the power mode exactly? Presumably LAN 2 is where the R3 is connected to right? Are any other devices connected to the fritz ports? That will happen if you didn't set a reserved IP on the router for the device. If you didn't you'd have to set it on the device itself manually Link to comment Share on other sites More sharing options...
Blumio Posted Monday at 08:40 AM Author Share Posted Monday at 08:40 AM 12 hours ago, Netduma Fraser said: What is the power mode exactly? Presumably LAN 2 is where the R3 is connected to right? Are any other devices connected to the fritz ports? That will happen if you didn't set a reserved IP on the router for the device. If you didn't you'd have to set it on the device itself manually The power mode is for data rate. Till 1 GBit/s. No only the r3 on Lan2 is connected. Yesterday I have to two crashes. Can I activate dhcp ? It seems that the wifi didnt work correct since I deactivate that. Link to comment Share on other sites More sharing options...
Fairypusher Posted Monday at 04:19 PM Share Posted Monday at 04:19 PM Hast du einen Dualstack Anschluss? https://forum.vodafone.de/t5/Geräte/Bridgemode-bei-der-FritzBox-6591-Cable-möglich/td-p/2890935 Quote hast Du die Fritzbox bei uns gemietet? Wenn Ja, kannst Du in den Einstellungen der Fritzbox den Bridge Mode aktivieren, wenn Du einen Dual-Stack Anschluss hast. Dies ist die Voraussetzung für die Nutzung des Bridge Mode. Bei mir hat eine statische IP und staticher DNS im Windows geholfen. Zumindest konnte ich dann ohne Probleme auf den Router zugreifen. Alternantiv kannst du im R3 statische IPs vergeben. Was sagt die Fritzbox zur Verbindung? Alternativ Exposed Host: https://ch.avm.de/service/wissensdatenbank/dok/FRITZ-Box-6591-Cable/131_DMZ-in-FRITZ-Box-einrichten/ Da geht es aber meistens um Nat Probleme und upnp und Ports allgemein. Link to comment Share on other sites More sharing options...
Blumio Posted Monday at 10:46 PM Author Share Posted Monday at 10:46 PM @Fairypusher vorab ich kenne mich in der Materie nicht super gut aus. Ich weiss nur dass ich den R3 ja nen halbes-dreiviertel Jahr ohne Probleme genutzt habe und nichts an den Einstellung an der Fritz Box geändert habe. Den Bridge Mode habe ich zuvor eingerichtet. Hierzu gabs ne Beschreibung mit Sicherungsdolument erstellen, dann die 0 auf 1 in der Bridge Mode Zeile umändern und den Router dann mit der geänderten Sicherungsdatei wiederherstellen. Das hatte ich im Vorfeld gemacht und wiegesagt es hat super funktioniert. das Thema mit dem exposed Host schaue ich mir nochmal an, weil ich die Fritz Box ja über vf Miete, kann natürlich sein, dass sie hier iwas geändert haben…. Link to comment Share on other sites More sharing options...
Fairypusher Posted Tuesday at 05:37 PM Share Posted Tuesday at 05:37 PM Das macht nix mit dem auskennen. Du bist hier und das zählt. Wenn du eine veränderte Config in eine Fritzbox lädst dann kann das schief gehen, weil die vor langer zeit das geändert haben bei AVM. Deswegen sind die Config dateien auch verschlüsselt (zum teil) und mit einer Checksumme versehen. zumindest bei den VDSL Modellen. Ich würde die Fritzbox mit der Recovery.exe zurücksetzen. Es einrichten und dann mal Bilder schicken was sie so sagst. Dualstack, Verbindungsqualität usw und Exposed Host und upnp Weil im Grunde hast du doppel nat dann nicht mehr. Alle Ports manuell zum R3 freigeben ist nicht so gut. Was natürlich sein kann, das dein Kabelbetreiber deinen Anschluss umgestellt hat. Das mehrere Nutzer Quasi bedient werden können und du deswegen jetzt nachteile hast. DS-Lite zu Dual Stack liest man da viel. Das Leute das aus dieversen Gründen umstellen lassen wollen, deswegen ist spannend was du aktuell hast. Erklärung: Dual Stack IPv4 IPv6 jeweils eine IP DS Lite IPv4 Tunnel steht dann dort IPv6 https://www.vodafonekabelforum.de/viewtopic.php?t=34545 Link to comment Share on other sites More sharing options...
Blumio Posted Wednesday at 11:12 AM Author Share Posted Wednesday at 11:12 AM -Config: Verstehe ich aber ich habe die Fritz Box ja mit geänderten Config über ein halbes Jahr genutzt. Das vorgehen wurde sogar auf der Vodafone Seite vorgeschlagen inklusive Erstellung neuer Checksumme. Was ich jedoch nicht weiss, wie sich die Config verhält, wenn es ein Update der Fritz Box gibt. Komischerweise habe ich gestern Abend 4 Stunden Zombis (cod) gespielt und hatte keinerlei Abbrüche. --> Ich blicks net Ich werde jetzt die Tage mal deinen Vorschlag nachgehen und hier Bilder von den Einstellungen posten. Danke dir schon Mal Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now