Restarting R3 everyday to get to the settings.

[sw3ar]

I must restart R3 manually everyday to get to the settings or even make those settings work. Am I the only one with that problem? I don't see alot post about it so I'm wondering

[VanillaCokeZz]

1 hour ago, sw3ar said:

I must restart R3 manually everyday to get to the settings or even make those settings work. Am I the only one with that problem? I don't see alot post about it so I'm wondering

Let it go

[sw3ar]

3 minutes ago, VanillaCokeZz said:

Let it go

but then geofilter doesn't work

[kryptik66]

I have to restart my router to get it to give out a DHCP address to devices. If I turn my router on first then turn the devices on after aka PC / Xbox, I have to restart the R3. Weird as if it is already on it should be giving out addresses.

[Netduma Fraser]

4 hours ago, sw3ar said:

I must restart R3 manually everyday to get to the settings or even make those settings work. Am I the only one with that problem? I don't see alot post about it so I'm wondering

What do you see when you can't access the interface? What doesn't work specifically with the Geo-Filter that a reboot fixes? What firmware version are you on? 

56 minutes ago, kryptik66 said:

I have to restart my router to get it to give out a DHCP address to devices. If I turn my router on first then turn the devices on after aka PC / Xbox, I have to restart the R3. Weird as if it is already on it should be giving out addresses.

Set static/reserved IPs for the devices and that should resolve it.

[VeeDot]

ive also found if you leave the browser open for long peroids of time then itll need me to reboot manually. other than that new firmeware works fine for me

[Blaze76]

5 hours ago, sw3ar said:

I must restart R3 manually everyday to get to the settings or even make those settings work. Am I the only one with that problem? I don't see alot post about it so I'm wondering

I disabled Steady Ping and this issue went away for me. Also Steady Ping was causing geo filter not to work for me.  Hopefully the devs are looking at Steady Ping and get it fixed soon.

[sw3ar]

16 minutes ago, Netduma Fraser said:

What do you see when you can't access the interface? What doesn't work specifically with the Geo-Filter that a reboot fixes? What firmware version are you on? 

It's been happening on every firmware, since day1. 41 currently.

On both chrome/phone-app it says someting like failed to initialize

I know geo-filter doesn't work when it connects me to servers outside of my filtering.

[Netduma Fraser]

1 hour ago, VeeDot said:

ive also found if you leave the browser open for long peroids of time then itll need me to reboot manually. other than that new firmeware works fine for me

That could be due to increased CPU usage (we're looking into that), if you use the mobile app to view when playing for example it should be better.

1 hour ago, Blaze76 said:

I disabled Steady Ping and this issue went away for me. Also Steady Ping was causing geo filter not to work for me.  Hopefully the devs are looking at Steady Ping and get it fixed soon.

Causing it not to work in what sense?

59 minutes ago, sw3ar said:

It's been happening on every firmware, since day1. 41 currently.

On both chrome/phone-app it says someting like failed to initialize

I know geo-filter doesn't work when it connects me to servers outside of my filtering.

Could you provide a screenshot of it next time you see that?

Try this for Geo-Filter:

• Disable GeoLatency
• Disable PingAssist (set it to 0,0)
• Enable Strict Mode
• Disable Fast Search

Then restart game or wait 10 minutes (in the lobby in the game). If that doesn't work, reboot PC/Console and it should work then.

[sw3ar]

15 minutes ago, Netduma Fraser said:

 

Try this for Geo-Filter:

• Disable GeoLatency
• Disable PingAssist (set it to 0,0)
• Enable Strict Mode
• Disable Fast Search

Then restart game or wait 10 minutes (in the lobby in the game). If that doesn't work, reboot PC/Console and it should work then.

I have those options set like that all the time.

[Netduma Fraser]

43 minutes ago, sw3ar said:

I have those options set like that all the time.

Make sure you use the simple mode to filter as well instead of custom

[sw3ar]

23 minutes ago, Netduma Fraser said:

Make sure you use the simple mode to filter as well instead of custom

Yes

[Netduma Fraser]

1 hour ago, sw3ar said:

Yes

As in your are using it or you'll try that?

[sw3ar]

33 minutes ago, Netduma Fraser said:

As in your are using it or you'll try that?

Been using whole time.

I also tested turning on/off:
- smartboost
- ad block
- ipv6
- steady ping
- dmz
- congestion control

Nothing helps.

[Dean.L]

so my xbox isint being put under gamin piorty ???

any iders @Netduma Fraser

[Netduma Fraser]

42 minutes ago, sw3ar said:

Been using whole time.

I also tested turning on/off:
- smartboost
- ad block
- ipv6
- steady ping
- dmz
- congestion control

Nothing helps.

Can you provide a screenshot of what you see when you get a game outside your radius please?

38 minutes ago, Dean.L said:

so my xbox isint being put under gamin piorty ???

any iders @Netduma Fraser

How do you have SmartBOOST set?

[sw3ar]

1 minute ago, Netduma Fraser said:

Can you provide a screenshot of what you see when you get a game outside your radius please?

I will give screenshot of app/chrome when I can't get to settings. When It happen again, propably tomorrow.

[Dean.L]

3 minutes ago, Netduma Fraser said:

Can you provide a screenshot of what you see when you get a game outside your radius please?

How do you have SmartBOOST set?

 

[Netduma Fraser]

36 minutes ago, Dean.L said:

 

When playing have a look in Stats for nerds or Network Activity, does it show gaming there? What port is your Xbox using?

[Dean.L]

29 minutes ago, Netduma Fraser said:

When playing have a look in Stats for nerds or Network Activity, does it show gaming there? What port is your Xbox using?

so its using a custom port 56656:both with 3075:both

it says its Unknown

yet when im playing mw3 it works fine on pc pick up when im play mw3 even know it says overwatch on logs

yes the xbox is using a cat 8 cable

and ive tryed all other steps hard shut down ect

[Dean.L]

networksetup=               ----------  VM-Modem-Mode---------R3----------2.5GB-Switch----------- all other devices

[Netduma Fraser]

On the Xbox itself in network settings make it use port 3074. We did do a DPI update recently so also resync the cloud on the Device Manager. Once you've done both those things see if it then works correctly please.

[kryptik66]

19 hours ago, Netduma Fraser said:

Set static/reserved IPs for the devices and that should resolve it.

Hi Fraser, I don't want to Hijack this thread but if devices are switched off overnight and switched back on they should still get a DHCP address from the router, two of my devices are reserved in the router however you shouldn't need a reservation just to get an IP address.. This morning even after rebooting the router and devices multiple times they would not get an IP I had to set static IP addresses to both devices. My PC was seeing the router gateway but couldn't get a DHCP address. I only have 4 devices on my network. I've already defaulted the router after the latest beta update.

Detects gateway but doesn't give a DHCP address to device.

My phone is still not currently finding an IP address on Wifi.

 

[sw3ar]

20 hours ago, Netduma Fraser said:

Can you provide a screenshot of what you see when you get a game outside your radius please?

How do you have SmartBOOST set?

 

[JR_]

Same issue since launch firmware up to the current one. I have to reboot it daily to connect, and geofilter does not work if I don't.