Zyxel nr5101 (cellular IP passthrough) + R2

[Borg]

Hi

the zyxel support the bridge/cellular passthrough mode and i cant make it work with the R2

i tried with a different router, the TP-LINK ER605 and it worked

why this happening and what should i do?

thank you

[Netduma Fraser]

Reboot the Zyxel, wait 2 minutes, then reboot the R2, wait 2 minutes then see if it works, otherwise try using the DMZ on the Zyxel instead using the R2 WAN IP, that should work and allow you to get an Open NAT behind the R2.

[Borg]

im cluless with this

can you be more specific what to do with the dmz

the dmz atm its 0.0.0.0

[Borg]

it worked 

the wan ip from the R2 its different from the one before i entered to the zyxel

this is how was supposted to work?

[Netduma Fraser]

Yes the WAN IP from the R2 System Information page which is the same IP the Zyxel gives the R2 is the one to put in the DMZ so that's all good!

[Borg]

thank you very much for the help and support