2 router set up

[Magyar0124]

Hi guys i have a question:

i looking into to purchase netduma R2 but i have some issues.

i have a tplink c1200 router  can i conect the two router with R2 from the tplink and keep the geo fence up and runing.

 

So connections :  Modem>>TPLINK C1200>>NETDUMA>>PC

 

I dont know if its possible to mount on a vertical wall the netduma because the tplink and modem its on a wall also the airflow of the netduma its onthe bottom.

 

So to summon vertical mount and geo filter the main questions

 

 

[Netduma Liam]

Welcome to the forum!

To answer your first question, yes. You can connect the R2 to the TP Link by running an ethernet cable from the Blue WAN port on the R2 to one of the LAN ports on the TPLink. However, if they're in separate rooms as illustrated, you'll need to get a long ethernet cable.

To answer the second question, the R2 does not have any mount points on the bottom unfortunately, so there isn't a quick and simple way of wall mounting it. You could probably manufacture a way to do this, but I'm not aware of any ways as yet.

[Magyar0124]

great the r2 arrived the geo fence working like you said its should i connected with modem >> tp link>> r2 >>pc

i have a issue i have a program vpn what i want to connect to asia while im use call of duty on north america geo fence and for some reason that time the game not find game lobbys..

so i wanted to test if its the router issue or the program issue so

i tryed to get rid of the tplink (maybe interfare with the r2) so from modem to r2 to pc connection

 

i made sure i make a clean installation so i reset to the factory settings the router.

when i plug in evrything how its should i get WAN IP connected at Dashboard for around 20 sec or less then after its says

WAN IP disconect/ed  i have no internet and i have no clue what should i do because if i replug the original way still have internet so idk neighter modem neighter no internet issue

 

Thnks in Advance

[Netduma Liam]

It sounds as though something isn't plugged in properly since removing the TP link.

Could you please clarify exactly how you've got the network setup now?

Is it: 
Modem -> R2 -> Connected devices?

Did you connect an ethernet cable from one of the LAN ports on the modem to the Blue WAN port on the R2?

[Magyar0124]

On 3/17/2022 at 12:26 PM, Netduma Liam said:

Welcome to the forum!

To answer your first question, yes. You can connect the R2 to the TP Link by running an ethernet cable from the Blue WAN port on the R2 to one of the LAN ports on the TPLink. However, if they're in separate rooms as illustrated, you'll need to get a long ethernet cable.

To answer the second question, the R2 does not have any mount points on the bottom unfortunately, so there isn't a quick and simple way of wall mounting it. You could probably manufacture a way to do this, but I'm not aware of any ways as yet.

so what i didi unplug the wlan ethernet cable from the modem and used the long ethernet cable from my tplink to connect to the modem then in my room i pluged the end of it into wlan r2 conection. from netduma to pc's when i was installing router up the interface told me there is no internet conection detected so i restarted modem so its give to the r2 a fresh signal the the interface said conection detected i install the device timezone etc.. then in wlan ip said disconected and no iternet i try to restart again modem but the same stuf ip recognised for like 10-15 sec then disconected

 

[Netduma Liam]

14 hours ago, Magyar0124 said:

so what i didi unplug the wlan ethernet cable from the modem and used the long ethernet cable from my tplink to connect to the modem then in my room i pluged the end of it into wlan r2 conection. from netduma to pc's when i was installing router up the interface told me there is no internet conection detected so i restarted modem so its give to the r2 a fresh signal the the interface said conection detected i install the device timezone etc.. then in wlan ip said disconected and no iternet i try to restart again modem but the same stuf ip recognised for like 10-15 sec then disconected

 

OK so now it's:

Modem LAN Port -> TPLink WAN port - TPLink LAN port -> R2 WAN port - R2 LAN port -> PC?

Note that each "->" symbol above denotes an ethernet cable.

That's how you'll have to make sure it's configured to get a connection.

After that, you might need to reboot the R2 to get a connection.