Jump to content

33+Killstreak


GHOST-1-EC

Recommended Posts

Posting settings here as well for you @Gravity Queen

"PS4 Static IP - Reserved

Geofilter - Ping Assist only - capped at 55ms

Qos - 98/98% Bufferbloat sliders (set to when high priority is detected) 

Port prio 3074; 9308; 25000-45000 (udp protocol only) 

Upnp enabled" 

Link to comment
Share on other sites

  On 4/22/2020 at 3:36 PM, GHOST-1-EC said:

Posting settings here as well for you @Gravity Queen

"PS4 Static IP - Reserved

Geofilter - Ping Assist only - capped at 55ms

Qos - 98/98% Bufferbloat sliders (set to when high priority is detected) 

Port prio 3074; 9308; 25000-45000 (udp protocol only) 

Upnp enabled" 

Expand  

Why Upnp enabled  ?

- Gravity Queen

 

Link to comment
Share on other sites

  On 4/22/2020 at 3:53 PM, Gravity Queen said:

Why Upnp enabled  ?

- Gravity Queen

 

Expand  

It opens only the ports needed by the console. 

Portforwarding does nothing 

DMZ opens all ports. 

When u enable UPNP on your XR500 go into a game then check the port/s in use by your console's ip address. 

 

Link to comment
Share on other sites

  On 4/22/2020 at 3:36 PM, GHOST-1-EC said:

Posting settings here as well for you @Gravity Queen

"PS4 Static IP - Reserved

Geofilter - Ping Assist only - capped at 55ms

Qos - 98/98% Bufferbloat sliders (set to when high priority is detected) 

Port prio 3074; 9308; 25000-45000 (udp protocol only) 

Upnp enabled" 

Expand  

The source and destination for ports ?? Can you write it down?

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...