Infoseye Posted October 17, 2018 Posted October 17, 2018 I have setup port forwarding on the R1 working fine, but wanted to know if this is possible. Can I setup port forwarding on my BT HUB 5 router, then remove port forwarding on the R1. Will it matter? Will I still have open bar type on BO4 connection? Or Does port forwarding has to be done on the R1 instead of my BT router? Thanks
Netduma Staff Netduma Jack Posted October 17, 2018 Netduma Staff Posted October 17, 2018 You only need to port forward on one router. Either one should work, just ensure you have an open NAT after you've finished. Usually we recommend using the functions on the R1 rather than your modem since different modems can cause complications. It should be fine with a hub 5 though.
Infoseye Posted October 19, 2018 Author Posted October 19, 2018 Is there a guide on how to setup open nat type on R1?
Netduma Staff Featured Comment Netduma Jack Posted October 19, 2018 Netduma Staff Featured Comment Posted October 19, 2018 9 hours ago, Seye said: Is there a guide on how to setup open nat type on R1? Yep! Check it out here: http://support.netduma.com/en/support/solutions/articles/16000022359-how-do-i-open-my-nat- Your best bet is always to try UPnP first. Then, try port forwarding. If neither work, go back to UPnP and put your Netduma into the DMZ of your modem. That should always work really. I hope this helps!
Netduma Staff Netduma Jack Posted October 19, 2018 Netduma Staff Posted October 19, 2018 1 hour ago, Seye said: Worked like a charm thanks! Awesome I'm glad if you need anything else just let us know.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.