Guest Netduma Fraser Posted December 29, 2014 Share Posted December 29, 2014 I have an ethernet cable running from the WAN port on the Brightbox to the PoE port on my Netduma R1. I then have my Xbox One and Desktop connected via ethernet to the other available ports at the back of the R1. With wireless disabled on the Brightbox. Going to the device manager on the R1 I can see my WAN IP is 192.168.1.85. Then I click the View other router interface button above this, alternatively I can access the Brightbox router control panel by going to 192.168.1.1. At the top I choose Advanced Setup, then on the left clicking on the firewall I go onto DMZ. I input the WAN IP that the R1 gave me and save the settings. With this setup I have open NAT and no issues at all. Link to comment Share on other sites More sharing options...
crazy joker Posted December 30, 2014 Share Posted December 30, 2014 I'm not open the image You do not have permission to view this attachment. Need Help? Our help documentation Contact the community administrator Link to comment Share on other sites More sharing options...
Guest Netduma Fraser Posted December 30, 2014 Share Posted December 30, 2014 I'm not open the image You do not have permission to view this attachment. Need Help? Our help documentation Contact the community administrator Please try again and see if you can view it. Link to comment Share on other sites More sharing options...
crazy joker Posted December 30, 2014 Share Posted December 30, 2014 Please try again and see if you can view it. ok now you see Link to comment Share on other sites More sharing options...
Guest Shane Posted March 24, 2015 Share Posted March 24, 2015 How do i find my wan ip on the netduma router so i can enter it in the dmz thing lol sorry im a noob Link to comment Share on other sites More sharing options...
Netduma Staff Netduma Crossy Posted March 24, 2015 Netduma Staff Share Posted March 24, 2015 How do i find my wan ip on the netduma router so i can enter it in the dmz thing lol sorry im a noob You can find it in the device manager. Pictures and instructions on putting the router in DMZ can be found here on the Wiki. Link to comment Share on other sites More sharing options...
Guest Netduma Fraser Posted March 24, 2015 Share Posted March 24, 2015 How do i find my wan ip on the netduma router so i can enter it in the dmz thing lol sorry im a noob Hey Shane, you'll need to upgrade to the most recent version of the R1 firmware which you can find here - http://wiki.netduma.com/doku.php?id=manual_updateonce you've followed the instructions and upgraded this will take you through adding to the DMZ - http://wiki.netduma.com/doku.php?id=how_do_i_open_my_nat Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.