Netduma Staff Netduma Crossy Posted May 28, 2015 Netduma Staff Posted May 28, 2015 Your not been a pain - all questions are welcome here! Please follow the instructions here. Let us know if that works. Also make sure that when you run the test you have the GeoFilter disabled
SamC Posted May 28, 2015 Author Posted May 28, 2015 Hi been , messing with it and my internet wouldnt work at all after i reset it so i had to switch out routers and i have at least got internet now
SamC Posted May 28, 2015 Author Posted May 28, 2015 Done the steps over and over still cant get it to work. Any other ideas?
Netduma Staff Netduma Crossy Posted May 28, 2015 Netduma Staff Posted May 28, 2015 Done the steps over and over still cant get it to work. Any other ideas? Do you have any existing port forwarding rules on the router? Also can you tell me what IP you have put in for the other router's DMZ.
SamC Posted May 28, 2015 Author Posted May 28, 2015 No i dont have any rules on either routers and 192.168.1.65
Netduma Staff Netduma Crossy Posted May 28, 2015 Netduma Staff Posted May 28, 2015 Ok, thanks for that information. Could you go to Settings >> UPnP and make sure that the enabled box is ticked - if it isn't tick it and click apply. Can you also go to Settings >> Miscellaneous and make sure UPnP forwarding is ticked. Finally can you restart the console and make sure that when you do so you have the GeoFilter disabled.
SamC Posted May 28, 2015 Author Posted May 28, 2015 I went to the netduma control panel or whatever you want to call it. I checked both settings and i made sure they were on that setting that you said and it worked that you so much
Netduma Staff Netduma Crossy Posted May 28, 2015 Netduma Staff Posted May 28, 2015 I went to the netduma control panel or whatever you want to call it. I checked both settings and i made sure they were on that setting that you said and it worked that you so much Awesome! So your NAT is open now?
Recommended Posts
Archived
This topic is now archived and is closed to further replies.