Spazz

Problem is, when I set it to 500/25, the furthest I can take my download speed down to is 250 and that doesn't do as good of a job as being able to take it down under 200.

My internet speeds are 500/20 with Spectrum but I have it set to 350/20. Speedtest Bypass is red/on in all tests. Here are the results for "full-speed" with CC Mode set to always on Here's the result with 50% download speed and CC Mode set to always on And here's the result with CC mode set to auto and download set to 50% My question is why cant I get great results like on the bottom test with my speeds set to the "max" and always on? The router is clearly capable of giving tons of throughput and properly prioritizing packets. But when I set it to always on with more than 60% of my download, my results are always like the top test.

Upgrading to the newest firmware seems to have fixed it lol.

https://gyazo.com/2af3d203b2781817abc2d3ccf03bc7cf

Wont change at all. I’ve tried resetting to the default color scheme, rebooting, unplugging for 2min, etc.

Yeah the RGB doesnt work at all after multiple restarts for other reasons. I've tried multiple colors and patterns and nothing works.

IM the high end PC guy. 240fps avg on a 240hz monitor. There's def loads of desync. Shit servers, man. Not much we can do on our end once you've achieved an A+ bufferbloat rating, the rest is really on them.

Cool. Where do I get the ER? Also, my lights havent worked since 4.0.23

All devices. Netgear cm1000v1 > R3 for wired devices > XR450 for wifi.

I have 500d/25u speeds but have a hard limit on my settings for bufferbloat. Every 12-16hrs, my speeds will both decline to under 5mbps and basically lock up any streams or browsing going on in my house. How to remedy?

Derp. I knew that 🙃. lol thanks

The R3 is in router mode and the xr450 is in AP mode. They’re connected via Ethernet.

I have wifi disabled on the R3 but I have an XR450 with the same SSID and PW for wifi. I cant delete the old ones cuz they arent showing in the device manager. They only show in the Geofilter section. Not a dealbreaker by any means. Just clunky looking.

You wouldn’t happen to have the battlenet ports would you?

The address is reserved and active. Sometimes, port 3074 opens during matchmaking but ports don’t open at all during the game itself. it’s a PC so I don’t think I’ll be putting it in the DMZ just for COD. I’ve reset both the game and router multiple times and I’d done /release /renew as well. Currently on .179 but I’ve had a moderate NAT since launch. update: I guess I jinxed it. NAT is now open lol. The other game ports still show as inactive even when I glance up mid-game

Meeee

Yeah I think I’m just going to end up getting another router and just putting my gaming platforms behind the R3 as opposed to my entire network being behind the R3.

Wow. Wild cuz the the next game was a GA IP and I was on 17ms lol.

https://streamable.com/xj4okt Scoreboard says 31. R3 says 160. Definitely felt like 160.

@Netduma FraserNa, rebooting didnt fix the loss of RGB. It's ok. I can deal with it as long as the router itself is functioning.

Software is working fine since updating but my RGB wont turn back on. I liked that it lit up when gaming to let me know packets were being prioritized. They still are but I miss the little queue to let me know for certain.

How u gettin lobbies where people arent shooting back? The netduma doesnt do all that lol

You guys are on a fkin roll! Love to see it!

https://www.waveform.com/tools/bufferbloat

Yep. Here’s a post I wrote on those forums https://www.reddit.com/r/ModernWarfareIII/s/GG2lgcFof7