Jump to content

Maximus

Members
  • Posts

    20
  • Joined

  • Last visited

Everything posted by Maximus

  1. Ok worked second time around. I just re downloaded the file and moved it to desktop instead of upgrading from download folders. Thanks
  2. Failed to upgrade. Done normal steps but it gets stuck at the very end of upgrading with an error something about google chrome. Will try once more and take a picture of error message
  3. Hi all, After factory resetting and then reloading DUMAOS i keep getting the above message when attempting to set everything up. It allows me to do the set up anyway but just wanted to check that this was only a bug and that i am still getting all the features ? Thank s
  4. Also if I add my gaming device on the geo filter then I go back to moderate ( even with geo fencing disabled ) I've deleted my device again and back to open
  5. Hi All, Managed to also get OPEN NAT by doing the below: Update Firmware 219 Factory reset router Disable IPV6 for LAN & WAN Reboot Router Power cycle PC Finally have OPEN NAT. thanks all
  6. Thanks, that's good to hear. I play on my pc but also have an xbox. Xbox showing as open NAT over WiFi but PC showing as moderate over ethernet for COD. I didn't have the xbox set up at all on the duma so I've deleted the no filtering for my pc and will report back if that makes it Open too. Hopefully it's open now anyway and a misread as u said
  7. Thanks Fraser. I tried one last time with some success. 1.Reset modem 2.Factory reset of R3 , then done the set up , set up smart boost , set up geo fence but with no filtering selected . 4.Back into the ISP Modem and turned on bridge mode again. 5.Refreshed 6.Went into duma os and rebooted from Web page. I've now got modem successfully in bridge mode, access to ethernet and WiFi. My pc is still showing as moderate NAT when loaded into COD, XBOX is showing as OPEN NAT. Anything else I could try to get open NAT on my PC ? Thanks
  8. I'm trying to set up Bridge mode via my isp and R3. I have the option on my ISP for Bridge mode and have selected it. After turning off and on both the modem and router I get access to Internet via WIFI but not via ethernet which my pc is connected with. I also can't access the duma application. Is there something I'm missing in the process? Basically I'm trying to get OPEN NAT type which I had before with DMZ method but this no longer is working for some reason.( currently on moderate) If I turn on my xbox which is connected via WiFi its showing open nat , but I can't get Internet on ethernet and I play cod on my PC. Any help or tips would be great. I've searched the forum but can't seem to figure it out. Is there anything need to do on the R3 ? Thanks all * edit I'm now no longer getting WiFi access for xbox. It just says LAN not set up , experiencing issues. I am however still getting access to WiFi on my phone via netduma and strangely also via my isp modem. I can't access either the modem or netduma. I can reset the modem though but I'll be back to moderate
  9. Great topic guys. This worked for me. I didn't know but I've probably had a double NAT TYPE this whole time. Maybe that created inconsisties with my bullet reg 🤔 I don't know but since doing the dmz isp method I now have Open NAT. thanks
  10. Just to note I only turned off ipv6 for LAN , WAN IPV6 is still enabled so not sure why can't connect devices via WiFi to router ?
  11. Hi all , I changed my DNS and had to turn off ipv6 via the router interface in order to get a specific type of vpn to work. Unfortunately this now means no other devices seem to be connecting to the router other than my wired PC ( partner not happy 😅) Do you have to have ipv6 turned on in advanced lan settings in order for other devices to connect? Sorry if this is a stupid question Thanks
  12. Hi all, I've been turning on my geo fence to saudi arabia and it's been working fine. My only issue is that when I want to turn it off and re launch the game its still showing my ping really high. When I turn off the geo fence I close my game from task manger , launch the duma application via my pc , put my location back to my actual area, remove filtering , and then re sync cloud. Unfortunately though when I re launch the game my ping is still showing the same as when I had the geo fence on for saudi. Any advice on the best way of turning the geo fence on and off would be greatly appreciated Thanks
  13. Ok will do thanks
  14. Sorry forgot to respond. Every thing is working now with the new firmware. Thanks again for your help
  15. Thanks so much
  16. hi all , Just wondering how I can turn off the geo fence. Sometimes I like to use my vpn instead for COD. thanks in advance
  17. hi all also having this issue at present. Not exactly the same but around 1am every night BST all devices lose connection to the router and wifi drops off, When u try reconnect it reconnects to the netdumar3 but says connected with no internet access. @fraser im already on the new firmware u sent me last week for my geo filter issues (4.0.23). The wifi does come back after around 40mins without having to turn it off or reboot.
  18. Reset ISP , updated firmware on R3. Same issue. It connected when I started matchmaking with geo filter on and set to london only for wz3 and said "Waiting for host" London server But then got stuck on matchmaking and now when I check netduma it shows me as inactive again.
  19. Hi there, Same issue here. Just set up NetDuma but unfortunately my device is showing as inactive within the Geo Fence. Ive disabled the following settings as noted in this thread but still have issue : Disable GeoLatency Disable PingAssist (set it to 0,0) Enable Strict Mode Disable Fast Search waited in game for 10mins and also restarted the game Should i go ahead and now do a full reset of my ISP modem and the NETDUMAR3 Router ? Can someone please confirm how to factory reset the Netduma ? Lastly should i try update the firmware first before restarting everything and if so could you please send it to me. Thanks for your help. Maximus
×
×
  • Create New...