tduma

Few quick questions for ya teamduma....Is this routers throughput power good enough for gbs. Does it work with pppoe type connection. And what throughput can we expect when all the features it has are turned on.... example other routers with certain open firmwares may say because of hardware specs it can route 900mbs raw throughput but when you turn qos on or use a VPN ect. It can only do 300mbs effectively. Honest answer plz before I she'll out top money 😂😂 made that mistake before with the r2,xr500,xr1000. There all sat in my shed collecting spider webs now 😭

Is it an external page. I'm blagged. Would it not be better for me to be on .485

Done all that Frazer....where is the qos tab how do I turn off the qos haha

Can you pm me it then plz so I can access it on my laptop only let me access the early access through my phone and I'd be doing the update on my laptop...cheers frazer

Which update?? .280 or the newest one .502

Will do! don't think it's going make any difference tho...

Definitely not software related I don't think. Pretty sure it's hardware.. think the CPU is overheating 🤔 idk blagging my head at this point 😂

Think it's overheating aswel...gets pretty hot within 5 minutes of been on.

😂 been about half hour and it's doing it again the light won't stay solid or consistent on which ever port I'm connected to. I factory reset from the interface set it back up from the wizard changed a few settings ie... Turned wifi off and turned upnp off then rebooted but it doesn't come back on and the Ethernet port light won't stay consistent only one solid is the power light

So just plugged it in connected it to laptop just to see if I could get on the interface with the ip 77.1 before I did the reset you mentioned and it worked again after been off for 24 cause I didn't get a chance to mess with yesterday. Don't get it surely it's ip conflict just makes no sense why it works after a 24 hour rest.

I'll let ya know how it goes within the hour....cheers 👍

Can't factory reset cause I can't get on the interface and the reset button on the back is having no effect. No I'm not on the early access firmware. I'm on a stable firmware from about a year ago. It's been mint till now on that firmware

Oh yeah and I had the r2 in dmz with a static IP on the main router and the Xbox in dmz and static IP on the r2. I do have both dhcp turned on tho. Could ip conflict be the problem even with it setup that way.

Was working perfect for months then all of a sudden started acting divvy

No nothing...it was working perfect how I have it setup...then one day about a week ago Xbox series x wouldn't connect and router wasn't seeing the r2..so I unplugged it and set the xr1000 up the same way. Then day n half later I plugged r2 back in and it was working. Been working 2days and then it's happened again Xbox won't connect through it and main router can't see the r2

My main router isn't seeing it either when I have it connected via lan port main and wan port r2

Frazer it's done it again....Xbox won't connect through the r2.....r2 internet light is on for like 5 seconds then goes off then repeats that over and over can't connect to gui with any ip address I know work including default. .77.1 won't reset using reset button on the back. Powered off all night still not responding in the morning. Command prompt showing ip4 address and subnet mask but no default gateway

I got on the interface with the original ip but it wasn't working the day before it wasn't responding to anything 🤨

Working again after a 24 hour rest 😂 so iv reset from the interface...don't know how to screenshot on laptop Frazer. But it's all good for now it's working thanks anyways 😎 anyone wanna buy a xr1000 cause that's a real piece of 💩 😭

How can I fix my r2 then Frazer if I cant access the gui or reboot it tried the 30/30/30 hard reset aswel router just doesn't respond.

Xr1000 v1 is the issue with the sliders not having an effect with pppoe connections fixed yet or not Frazer....

Have they still not fixed the pppoe sliders issue in the new firmware??? 🙄

I was using the r2 behind my main router just for the geo filter...then today out of nowhere my Xbox wouldn't connect to the internet. So tried getting onto the interface of the r2 wouldn't let me. tried hard reset wasn't having it. Just will not reset. Not bothered now. Just want to use my xr1000 same way just for the geo filter. How do I do that plz

Frazer think my r2 has bricked can't hard reset from the back...anyways how do I set up my xr1000 so I can just use the geo with my dd-wrt please m8