Holz

I have R2 and I'm having the same problem. I'm searching for match and a message appears saying it was unable to connect to the host. Another problem that happens when I open the game: I receive a message saying that I have been disconnected from the servers. And I can only get into the game after restarting R2. I really believe the problem is with R2, but I can't say what the problem is.

Problems resolved!

I installed the previous firmware and then installed the latest one to fix the problem, but nothing resolved it. I factory reset after installation.

I tested all the recommendations, but nothing solved the problems mentioned.

I will test and return with the result. Is the effect of console prioritization the same as on PC?

My modem is a Nokia G-1425G-B (fiber optic). I have configured R2 in modem DMZ mode. I play on PC via ethernet. I manually set it to Call of Duty( Series ), type normal( default ) apply to wan. I have open NAT without R2, but I can only get moderate NAT with R2. I've tried putting the PC IP into R2 DMZ mode, but I still can't get NAT open.

I activated traffic prioritization for COD BO6(type normal/default ), but it is not recognizing down and up packets in online matches.

I did the tests and ipv6 only works if R2 is in pppoe. But the R2 speeds are very low.I have 500mb download and R2 does not deliver my contracted bandwidth speed.

I'm on firmware 3.3.280 and I can't use IPv6. I tested ipv6 on the ISP modem and it is working correctly, but on R2 it does not work. Is this a firmware bug?

I took some time to do some tests and wanted to ask another question about bandwidth speed. My current plan is 500MB download and 250MB upload, but my ISP is providing me with 1GB download and 500MB upload speeds. In my tests I get speeds (with the provider's modem) of 947MB download and 510MB upload. What speed do I need to put on my R2 to improve optimization?

I'm on firmware 3.3.280

I only left the PC to do The speed test and it didn't exceed 800mb in The speedtest. If i put R2 on pppoe the bandwidth is lower than 700mb. I saw your comment recommending using R2 in dmz, but the problem is not resolved. Do you have any tips for me to try ?

I hired 1gb down and 500mb up. I tested the speed only With the PC connected directly to the cable, but it doesn't exceed 800mb.

I put 1000mb download and 500mb upload, but I can't reach more than 800mb. I'm using netduma R2 on dmz and I can't get any more bandwidth. I have already disabled all protection options and left only IPv6. Is this a defect in netduma R2?

Ok. What % can I leave in congestion control without losing too much bandwidth?

I have an internet plan with 500mb download and 250 upload. There are 10 connected devices (9 Wi-Fi and 1 cable) on R2. My question is about the ideal configuration for congestion control in R2. If I leave 100% of the bandwidth in congestion control and control the bandwidth allocation to the devices, would that solve the delay in the game? I will prioritize the COD game. I used the translator, so I'm sorry if it wasn't clear.

If I configure R2 with DHCP, won't I get double nat?

I have 500 down / 250 up contracted. My speeds go from 550/600 down and 350/400 up. I can only get these speeds with QOS disabled on R2. Do you have any tips for achieving these speeds with QOS active?

I have configured my R2 with pppoe but I am not getting my full bandwidth. I can only get my full bandwidth with QOS disabled. Do you have any explanation for this problem? Another question, I am receiving speeds well above my contracted plan. Do I have to configure the speeds that appear in the speedtest or the speeds that were contracted in R2? my firmware is 3.3.280.

congestion control off ?

Hello! I want to ask a question about prioritization. I played on console and had my right setup for the platform. I switched to PC and am unsure to set up COD prioritization. What is the best option for COD on PC?

Atualizei o firmware e o DPI. Qual seria a configuração ideal para jogar COD no xbox SX? Meu cenário com o roteador é apenas o xbox conectado para jogar, tenho Internet exclusivamente para o xbox. My biggest problem in COD is shoot first and die first. I tried many configurations with the old firmware and nothing worked.

Hi I put these settings on my router. But I can't solve the problem of shooting first and dying first. Would you have any tips? I play COD MW2 on XBOX SX. I use my internet only to play, I don't have any device to compete with the console. My contracted speeds are 300mb down and 150mb up.

I'm here to say that I suffer from the same game lag issue. I managed to make my ping very stable in matches, but it seems that it takes time to kill enemies, on the other hand, I am an easy target within matches. My ping is 21ms-25ms and I hired another internet just to play on the console, but it's no use.