Jump to content

sKIzXR1kay

Members
  • Posts

    28
  • Joined

  • Last visited

Basic Info

  • DumaOS Routers Owned
    XR500

Gaming

  • Gamer Type
    PC Gamer
    Console Gamer
  • Favourite Genres
    Shooters
    Racing
    Platforming
  • Connection Speed
    1001mbps or higher
  1. Liam! Awesome, and thank you! I have factory reset my XR1000 again, and set it up via the starting web interface. This setup config will have to be my 'band-aid' until you guys have solid data on Fortnite again and maybe a cloud update for us all. Thanks in advance! Device Manager: my computers are set to DEVICE: Computer QoS Settings - Congestion Control: Always On @ 70% of 1000Mbps for UL & DL. - Bandwidth Allocation: by Application(Livestream, Gaming, & Uncategorized) have Queue Priority for both UL & DL. - Share Excess - is enabled for both UL& DL Geo-Fence - is setup with my devices, but does not see any servers while gaming. Because my computers are set as COMPUTER under the Device Manager.
  2. I know, right? That is why my ping is currently sketchy, I have to run QoS by DEVICE and not by Application(I stated this in the past). So therefore, Fortnite data is at the mercy of FIFO on the queue as all other data heading for that device, gaming traffic is not being pushed to the front of the queue. I also had Congestion control set to either Always On or Auto. If QoS saw the data from Fortnite as 'gaming data' like it used to. It would have gone to the front of the queue like it was doing prior. I give it bandwidth because its a computer, and I am running the other programs related to streaming. I do not want these two computers not to have enough bandwidth, or have it taken by another 'big talker' asking for data on my LAN while I'm gaming. That was the entire reason I purchased the XR1000. This used to work. I should not have to have QoS set to "be DEVICE" for a supported game/ Game Engine. I should be able to set as DEVICE: Computer TYPE: Fortnite or Unreal Engine Something changed for it to stop working as it did. We know Epic patched Fortnite, and iirc, NetDuma was updated as well. Thereby breaking the working config I had on my router prior from 2022.06.27 up until this date range: 2022.09.07 - 2022.09.11(when I really noticed this was not an anomaly and it was consistent. this was not my normal with the XR1000 configured) I am requesting that Fornite be re-evaluated. I do not think it is being seen correctly while in game.
  3. The Geo-Filter is seeing a server, and QoS is still not seeing the gaming data properly from Fortnite. I still can not have QoS by Application I have to set it to DEVICE. Even though this is "KIND OF" working currently. My ping is still erratic now, as without QoS by Application. My ping, latency and game feel in Fortnite is still not what I had prior to whatever happened in the beginning of September. So I'm not sure if it is what changed in the patch update Epic Games pushed out v21.51, or changes/ updates to NetDuma code on the backend, or a combination of both. I had the XR1000 running the Geo-Filter for both of my computers, as DEVICE: Computer TYPE: Fortnite. My QoS was setup to prioritize by Application. This worked from my, "Out of Box setup" in June of this year until recently, and it was amazing. I had made no changes to my router, or would play with the router settings prior to I noticed teh Geo-filter and QoS were no longer working like they did.
  4. 1. I exited the Fortnite, and the Epic Games Launcher. I then removed my device in the Geo-Fence, and resynced its cloud for S&Gs. 2. in device Manager, I set my computers Device: Computer TYPE: Unreal Engine, SAVED it and RESYNCED its cloud. 3. I went back to Geo-Fence and added my device to filter as Device: Computer TYPE: Unreal Engine, the wizard then showed me the list of options(games) to filter. I selected Unreal Engine and completed the wizard. The ADD DEVICE Wizard did not Auto-Magicly have the filter enabled, and I was not able to toggle/ ENABLE the filter on my device in Geo-Fence(but I was able to enable the filter when it was Device: PlayStation TYPE: Unreal Engine ). 4. I went back into Device Manager, and set my computer as a PlayStation(sigh). Saved it and resynced its cloud. 5. back into Geo-Fence and ran the ADD DEVICE Wizard. I added my computer to the Geo-Fence Filter and let it, "recommend a mode for my game", clicked CONTINUE, scrolled down and selected "Unreal Engine", and clicked NEXT. And cleared the message that it was added successfully. 6. go back into Geo-Fence and I had to enable the Filtering Mode. I then waited 2 minutes. (then my youngest stopped over, thus delaying me wrapping this up.) 7. start Fortnite and let's see what we get. I'll start up a game now.
  5. I just tried it as DEVICE: Console, TYPE: Unreal Engine. I think this actually worked. I want to test it as DEVICE: Computer, TYPE: Unreal Engine. I'll brbiab ... 😁
  6. the above "psudo works", I think it is setup as Fortnite for the filter, I want to verify that is what the add device wizard selected, I thought I clicked manual. n I also want to test the filter as DEVICE: PlayStation TYPE: Unreal Engine While I did show my server in Geo-Filter, I was like, alright now we are getting somewhere. I had a 10ms-13ms PING on Spawn Island, and Game Data was being seen by Network Monitor. Once I dropped into the actual game play, my ping was going between 13ms - 30ms or higher, and I was getting some packet loss as we settled in to the match. I generally do not have packet loss at all with the XR1000 and QoS working properly. I did have a minute or two that I was close to a Zero Ping, but then it spiked back up in the 20s when I got into fights. What is NetDuma actually doing or looking for that it would prioritize gaming traffic on a console more than a PC? The client/ server data stream should be the the same
  7. right on, I didn't realize that was an option. lol log-1665335147078.txt
  8. Geo-Filter is still not working correctly. First, I did a RESYNC on the Ping Heatmap, then I loaded up Fortnite and started a SOLO game. In Network Monitor it was showing gaming data as I went from my Party Lobby(main screen PLAY/ Battle Pass/ locker/ Etc.) to Spawn Island(lobby before jumping out of the bus). Geo-Filter did not have any servers listed and Network Monitor was still showing a bit of gaming data. (gaming data and web data were both red, but different shades ... Gaming Data was dark or a brick red). While in game, Geo-Filter still had no servers listed. My PING would bounce around from 0ms - 40ms, I seemed to be averaging 15ms - 20ms. Normally my ping is 0ms - 10ms on NA-East, there are a couple servers in the farm that I get almost a 20ms PING. In the past I have not looked to see the specific IP Addresses of these servers. Nor have I flagged or blocked them in the geo-Fence. log-1665332939357.txt
  9. right on, right on! Log File from the bottom of the System Information, not the actual 'router log' from SETTINGS > MONITOR > LOG OOF! So I saw that my TIME.ZONE was set to -8GMT which is not for my location. I actually have TWO log dumps, I have the log dump that was running from the re-image of v1.0.0.64_1.0.49 Friday night, and then a second log dump after correcting my Time.Zone. I did CLOUD RESYNCs in the Ping Heatmap prior to the log file dumps. log-1665324857877.txt log-1665323586131.txt
  10. When I do the RESYNC CLOUD in Ping Heatmap, should there be verbiage in the log file? Currently I am not getting any log activity about syncing cloud data.
  11. all good, no worries. I did the RESYNC in Heatmap, but my current logs do not show or refer to syncing data for NetDumaOS since I rebuilt from image file. I want to say that I had that in logs prior, but I only checked logs once or twice since June. I grabbed the log from Settings > Monitoring > Log
  12. No sir, that is the entire log since the re-image. I only swapped out my internal MAC Addresses, I prefer not to have them listed/ posted on a public forum. I did not 'flush' the cloud. I didn't know that was an option without doing a factory reset. I 're-synced' CLOUD in each section prior to grabbing the log, Geo-Fence, Ping Heatmap, QoS and Device Manager. I do not know where to give the command to 'flush'. I am only doing this via web interface in Chrome from Win10. Should I be using some other way? Is there a console, and or a list of commands as opposed to using the web interface?
×
×
  • Create New...