jodafi

forgot this one I found.. The trick is really if you can telnet into the xr700. The Telnet Enable line in the debug page http://routerlogin.net/debug.htm was not there in ver 38, 36, 34 FW. But luckily I found it in 1.0.1.20. Downgrade your FW under Firmware Upgrade in http://routerlogin.net/adv_index.htm if Duma OS doesn’t take you there. Use your Windows command line to telnet into the Linux OS of the router.

Regarding the WiFi (and Duma not lodaing) problem. I had same problem and found the solution... It is to reset the nvram. Here´s what I found. " Execute these commands through telnet into the router, courtesy of kamoj at snb. WARNING: These commands will erase all your settings and should not be tried out if you are under warranty. Use at your own risk. To make a real "Factory reset" issue these commands: For R7800: Code: nvram default nvram commit mtd erase netgear reboot For the R9000 ( the mtd command does not exist so you should try these commands instead: Code: nvram default nvram commit ngmtd="$(awk -F: '/"netgear"$/ {print $1}' /proc/mtd | grep mtd)" [ -n "$ngmtd" ] && flash_erase /dev/"$ngmtd" 0 0 reboot " By the way, the R9000 command works on XR700 also