-
Posts
429 -
Joined
-
Last visited
-
Days Won
3
Everything posted by XSXS
-
Future proofing, if i ever wanted to increase my Band with. Plus i just found out my isp requires 16x channels for speeds above 150meg, which i have now. I know the 7610 can do 343meg but the 7620 can do twice as fast. Also, i did some research and the more channels the modem has, the better your modem will peform cuz it can pick the best channels to use.
- 354 replies
-
- intel puma
- jitter
-
(and 6 more)
Tagged with:
-
Thanks fuzzy! Modbox, Why do you say the 7620 is not compatible with the Netduma? What tests did you run, etc? 16 channels is more attractive than having 8 so curious of your test results or anyone else who tried the 7620.
- 354 replies
-
- intel puma
- jitter
-
(and 6 more)
Tagged with:
-
Thanks dead pool!
- 354 replies
-
- intel puma
- jitter
-
(and 6 more)
Tagged with:
-
Question for the user that own the TC-7610, what gaming system do you have and what games are you playing that you noticed a night and day difference with?
- 354 replies
-
- intel puma
- jitter
-
(and 6 more)
Tagged with:
-
What is different about the 7620 vs the 7610 hardware wise besides the 16x channel bonding? Also curious as to why you say the 7620 is not compatible with Netduma? Anyway, I encountered more lag and some of the worse games I have played in Titan fall 2 using the 7610. I reactivated the Cisco DPQ-3212 and connection was back to normal, no lag and my stats started to immediately go up. However with that being said, my son said he did not notice any difference good or bad with the 7610 playing Destiny PVP but at the same time I don't recall of him ever complaining about lag with Destiny. Not saying he does not experience lag, just I don't think he is the type to complain about it unless it is glitching out. As for running ping plotter and line quality (ping) test, and buffer bloat on DSLreports.com on the two different modems. The results areis only marginal, Minimum ping overall is the same. The ping plotter graphs on the Cisco look to have less spiking though. As for line quality test and buffer bloat tests. Possibly a slight edge to the TP-link but that is going off memory however it was difference of get 3 A+ rating on the ping test VS 1 A+ and 2 A's. Now for buffer bloat, the down load pings were better with the TP-link and the Upload pings wre pretty much the same. Anyway, as of right now, I feel the the Cisco outperforms the 7610 gaming wise but only tested it for a week but I think that should be enough. I may test again but I am also getting tired of swapping out hardware. Anyway just my findings so far.
- 354 replies
-
- intel puma
- jitter
-
(and 6 more)
Tagged with:
-
Most likely your lines were messed up when you had the Cisco connected and probably needs better signals to run good and the tp link has better operating tolerances so that's why it ran better. I Wonder how the Cisco would perform after you get your lines fixed...
- 354 replies
-
- intel puma
- jitter
-
(and 6 more)
Tagged with:
-
RTA = return path attenuator.
- 354 replies
-
- intel puma
- jitter
-
(and 6 more)
Tagged with:
-
Actually my modem levels were great. My Down stream was approximately at -2.5 db 39 db snr and upstream was -45 db but had a 6db RTA pad installed on the back of the modem. Installed the -3.5 splitter, removed the 6db RTA. Checked modem levels on my Cisco and DS was -7db, 36 db SNR and -42Db on the upstream. Installed the tp link, DS went to -10db using the exact same cables, US levels stayed the same! However all those limits are still within spec. I would like to see my DS levels better though. I'm going to check some things this weekend. If no improvement, TP link goes back to Amazon. So who knows maybe that Cisco modem dpq3212 is even better than the tp link???...
- 354 replies
-
- intel puma
- jitter
-
(and 6 more)
Tagged with:
-
You will want to use a passive splitter like one of these: https://www.amazon.com/Splitter-Broadband-output-capable-5-1002MHZ/dp/B008R3LOM0/ref=pd_lpo_vtph_23_lp_t_3?_encoding=UTF8&psc=1&refRID=ZG7N0S9N43S8GE3WYFTT https://www.amazon.com/Coaxial-SV-2G-Digital-Splitter-screws/dp/B0036USDLO I Have two cables from the side of my house to my network panel so I split it there. You may want to open that cable box on the side of your house, if you have one and see what you have going in the house. If only one cable going in the house you can add the splitter and cable right before the modems. I have two modems like mod box, one for the phone and for my internet, the TP-link 7610. I just started using this set up and have not noticed much of a difference with the TP-link playing titan fall 2 or Destiny so I may be returning the TP-link. Actually, I have been seeing more lag with this set up and have had some of my worst games to date. The only difference is the new modem, a splitter is installed and I upped my internet plan from 50 meg to 150 meg. I want to do some more testing and check my cables etc before making my final decision though. but right now my ISP provided Cisco DPQ3212 seems to perform better. I will update this next week.
- 354 replies
-
- intel puma
- jitter
-
(and 6 more)
Tagged with: