Port forwarding!

[David J]

On 1/23/2025 at 6:41 AM, L2W said:

@David J Hey man , i was browsing by and noticed you are having a bit of a difficult time. Good news, rather in the range of pictures and step by step instructions and color coded as this helps me especially when were just typing back and forth. Some wording by other people and their choice of explanation can be some what cunfusing . WEll here you go. Quick instructions below.

TIP - Before Starting this little guide i put together for you, I STRONGLY RECOMMEND you got to the devices your want to RESERVE aka Static IP for and CONFIGURE on each device that you are wanted to RESERVE.

Example - Smart TV - Setting - Network - Custom 
Enter IP - 192.168.1.200
255.255.255.0
prefix length (24)
Router / IP - 192.168.1.1
DNS1 - 1.1.1.1
DNS2 - 1.0.0.1     
APPLY/TEST

Then immediately go to DUMA OS 
and follow these steps . Picture below for guide.
, 
This is where the (Green and Blue ) come from :
Hope this helps , as i can understand better if i can see or visualize what people are trying to say.                                                              

Green Arrow :
Starting IP Address :  Set to - 2
ENding IP Address : Set to - 100
Apply

Blue Arrow:
Click ADD: Add your device (if not identified with name , find by the MAC number, if anything just go to device manager right quick and memorize the last to mix of numbers and letters in the last column and come back and do it again.  This way when you select , you can identify your device and add it properly.
WIll be PROMPT to give device name:

you picture looks like you're on a netgear XR....I'm on the R3 but I'm assuming you can set it the same way?....my only question is....what is it suppose to do for say the xbox or ps5 by setting the static ip outside of the DHCP range?

[L2W]

4 hours ago, David J said:

you picture looks like you're on a netgear XR....I'm on the R3 but I'm assuming you can set it the same way?....my only question is....what is it suppose to do for say the xbox or ps5 by setting the static ip outside of the DHCP range?

@David JThe Photo I provided is in fact part of the XR series . I understand and realize you are on the R3.
I didn't think i would have to explain that part, my apologies for not using a screenshot of the R3's Settings. I guess i assumed it shouldn't matter given the fact i tried to make it as simple as possible when trying to explain port forwarding to someone and how to implement it on their end. Basically in a nut-shell , it's as simple as i could make it , well i can try this way. Hope this way is better for you. Let me know either way. I tried.

FIRST - Here is the answer to your question , then below is a detailed way for you to accomplish and for you to apply port forwarding on your  own !

Setting a static IP outside of the DHCP range for your Xbox or PS5 helps ensure that the console always has the same IP address, and it avoids potential conflicts with other devices on your network.

Here’s why it matters:

1. Avoids IP Conflicts
   When a device connects to your network, the router assigns it an IP address from the DHCP range. If your console’s IP is within this range and the router later gives that same IP to another device, it can cause connection issues.

2. Makes Port Forwarding Work Smoothly
   Port forwarding rules are tied to a specific IP address. If your console’s IP changes (as it would with DHCP), the forwarding rules break, and you’d have to set them up again. A static IP outside the DHCP range keeps this from happening.

3. Keeps the Console’s Connection Reliable
   By setting the static IP outside of the range, the router will never try to assign that same IP to another device. This ensures your console always has a stable and consistent connection.

In short, it’s about making your network smarter: your Xbox or PS5 gets a reliable, conflict-free IP, and you get peace of mind knowing your setup is rock solid!

 TRY THIS OPTION BEFORE IMPLEMENTING PORT FORWARDING ON YOUR OWN
UPnP - (on)
Port Forwarding - (off/dont-forward-any-ports)
UPnP will open all the necessary ports automatically for you in most cases.

IF you still need to SETUP port forwarding , well here you go, enjoy

Steps to Set Up Port Forwarding

1. Find Out Which Ports to Open
   Research online to find the required ports for your game or service. Look for specific information for your gaming console, app, or game.

2. Gather Key Information
   Before starting, note down:

   • The ports you need to open (e.g., 3074 or a range like 27000-27100).
   • Whether the ports require TCP, UDP, or both.
   • The IP address of the device you're setting up (e.g., your Xbox, PC, or PlayStation). You can find this in your device’s network settings.

---

What You’ll Need to Enter

• Rule Name:
  Give the rule a clear name so you know what it's for later (e.g., "Xbox Gaming" or "Rocket League").

• Start Port:
  If the ports are in a range (e.g., 27000-27100), enter the first number in this range here. If it's just one port, use that port number.

• End Port:
  For a range, enter the last number in the range here. For a single port, use the same number as the Start Port.

• Protocol:
  Choose TCP, UDP, or Both based on what the game or service requires. This is usually listed in the instructions or online.

• IP Address:
  Enter the local IP address of the device you are forwarding ports for. You can find this in the device’s settings under "Network" or "Wi-Fi Details."

---

• Save Your Changes: Don’t forget to hit "Apply" or "Save" after entering the details.
• Test Your Setup: After saving, check if the game or service works as expected.

[David J]

18 hours ago, L2W said:

@David JThe Photo I provided is in fact part of the XR series . I understand and realize you are on the R3.
I didn't think i would have to explain that part, my apologies for not using a screenshot of the R3's Settings. I guess i assumed it shouldn't matter given the fact i tried to make it as simple as possible when trying to explain port forwarding to someone and how to implement it on their end. Basically in a nut-shell , it's as simple as i could make it , well i can try this way. Hope this way is better for you. Let me know either way. I tried.

FIRST - Here is the answer to your question , then below is a detailed way for you to accomplish and for you to apply port forwarding on your  own !

Setting a static IP outside of the DHCP range for your Xbox or PS5 helps ensure that the console always has the same IP address, and it avoids potential conflicts with other devices on your network.

Here’s why it matters:

1. Avoids IP Conflicts
   When a device connects to your network, the router assigns it an IP address from the DHCP range. If your console’s IP is within this range and the router later gives that same IP to another device, it can cause connection issues.

2. Makes Port Forwarding Work Smoothly
   Port forwarding rules are tied to a specific IP address. If your console’s IP changes (as it would with DHCP), the forwarding rules break, and you’d have to set them up again. A static IP outside the DHCP range keeps this from happening.

3. Keeps the Console’s Connection Reliable
   By setting the static IP outside of the range, the router will never try to assign that same IP to another device. This ensures your console always has a stable and consistent connection.

In short, it’s about making your network smarter: your Xbox or PS5 gets a reliable, conflict-free IP, and you get peace of mind knowing your setup is rock solid!

 TRY THIS OPTION BEFORE IMPLEMENTING PORT FORWARDING ON YOUR OWN
UPnP - (on)
Port Forwarding - (off/dont-forward-any-ports)
UPnP will open all the necessary ports automatically for you in most cases.

IF you still need to SETUP port forwarding , well here you go, enjoy

Steps to Set Up Port Forwarding

1. Find Out Which Ports to Open
   Research online to find the required ports for your game or service. Look for specific information for your gaming console, app, or game.

2. Gather Key Information
   Before starting, note down:

   • The ports you need to open (e.g., 3074 or a range like 27000-27100).
   • Whether the ports require TCP, UDP, or both.
   • The IP address of the device you're setting up (e.g., your Xbox, PC, or PlayStation). You can find this in your device’s network settings.

---

What You’ll Need to Enter

• Rule Name:
  Give the rule a clear name so you know what it's for later (e.g., "Xbox Gaming" or "Rocket League").

• Start Port:
  If the ports are in a range (e.g., 27000-27100), enter the first number in this range here. If it's just one port, use that port number.

• End Port:
  For a range, enter the last number in the range here. For a single port, use the same number as the Start Port.

• Protocol:
  Choose TCP, UDP, or Both based on what the game or service requires. This is usually listed in the instructions or online.

• IP Address:
  Enter the local IP address of the device you are forwarding ports for. You can find this in the device’s settings under "Network" or "Wi-Fi Details."

---

• Save Your Changes: Don’t forget to hit "Apply" or "Save" after entering the details.
• Test Your Setup: After saving, check if the game or service works as expected.

no need for apologies man...I knew I could do the same thing on my R3...I just know sometimes they are set up differently and things get changed on each newer router. Also, I had just asked about putting your router on an IP addy outside of the range...to be honest I had never heard of that...I always thought to static it was in the range...so its nice to learn something new...however....I wasnt the one that was having all the port forwarding troubles, that was the original poster but I do thank you for explaining the static out of range reasoning.

[L2W]

2 hours ago, David J said:

no need for apologies man...I knew I could do the same thing on my R3...I just know sometimes they are set up differently and things get changed on each newer router. Also, I had just asked about putting your router on an IP addy outside of the range...to be honest I had never heard of that...I always thought to static it was in the range...so its nice to learn something new...however....I wasnt the one that was having all the port forwarding troubles, that was the original poster but I do thank you for explaining the static out of range reasoning.

@David J You are more than welcome.

I look at this as a positive and informational moment. I do appreciate the kind words, and Im just happy 1 person gained knowledge from my efforts, never know the OP may benefit as well. If not , I tried. Never hurts to learn something new.

[Fuzy]

I would also add that for all bridged or manageable devices (managed switch/AP/NAS etc. for example) it is strongly preferable, firstly to easily find the device administration page on a browser and secondly for the reasons mentioned above!