Grönis Posted August 23, 2019 Share Posted August 23, 2019 Hello I did install dd-wrt on my xr500 and I didn't like it. Now I want to go back to dumaos again. I have tried to do it but I don't having any luck. Do you have any suggestions for me how's I need to do? I have tested the tftp way but I don't get it to work. I run osx so any help would be appreciated. Link to comment Share on other sites More sharing options...
Fuzy Posted August 23, 2019 Share Posted August 23, 2019 TFTP work well for me ! Link to comment Share on other sites More sharing options...
Grönis Posted August 23, 2019 Author Share Posted August 23, 2019 55 minutes ago, Fuzy said: TFTP work well for me ! Ok, can you tell me how you did it? Link to comment Share on other sites More sharing options...
Guest Killhippie Posted August 23, 2019 Share Posted August 23, 2019 On 8/23/2019 at 7:59 AM, Grönis said: Hello I did install dd-wrt on my xr500 and I didn't like it. Now I want to go back to dumaos again. I have tried to do it but I don't having any luck. Do you have any suggestions for me how's I need to do? I have tested the tftp way but I don't get it to work. I run osx so any help would be appreciated. To use tftp you need a windows machine or the OS X client in the instructions from Netgear there is a link to downloading the OS X client. Not sure what version it supports or what you are running. I'm on Mojave 10.14.6 and it hasn't been called OS X for a while now as its been renamed macOS. Normally you can just Just flash the Netgear firmware from within dd-wrt. then after it reboots, turn it off, then turn it on and reset it using the reset button in the back.https://kb.netgear.com/000059634/How-to-upload-firmware-to-a-NETGEAR-router-using-Windows-TFTP This link may help: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=264152&sid=9b4b574e36260b6083e8281f12fbfe68 Its for a different Netgear router but the same principle applies, also check where you got your version of DD-WRT from for their instructions too. Link to comment Share on other sites More sharing options...
Grönis Posted August 23, 2019 Author Share Posted August 23, 2019 8 hours ago, Killhippie said: To use tftp you need a windows machine or the OS X client in the instructions from Netgear there is a link to downloading the OS X client. Not sure what version it supports or what you are running. I'm on Mojave 10.14.6 and it hasn't been called OS X for a while now as its been renamed macOS. Normally you can just Just flash the Netgear firmware from within dd-wrt. then after it reboots, turn it off, then turn it on and reset it using the reset button in the back.https://kb.netgear.com/000059634/How-to-upload-firmware-to-a-NETGEAR-router-using-Windows-TFTP This link may help: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=264152&sid=9b4b574e36260b6083e8281f12fbfe68 Its for a different router Netgear router but the same principle applies, also check where you got your version of DD-WRT from for their instructions too. Thank you! Thant did work, I didn't have turn on tftp in Windows, now is all good. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.