Wr3ck3r

Update...I now have an open nat. I removed the port forward I had earlier and added new port forwards that correspond with a PlayStation. I forgot to do that earlier after changing my device from PC to PlayStation. All is good now.

Ok, so I followed your steps and the net delay is gone. However, my nat type changed from open to moderate. I added a port forward in R3 but so far that hasn't worked. And yes...it is set up as R3 WAN to gateway LAN.

This is the best I could do. It kept going in and out trying to ping a server. Most of the time there was no server showing. I had to grab this shot fast as it kept going out.

For the last few weeks I have been getting the Waiting on Relay message for BO6. The only way for me to stop this is by turning OFF Geo Filter. I haven't had this issue before. Everything runs great with the filter off...no problems getting great ping in game whatsoever. I'm just wondering if anyone else is having the same issue. I have my R3 set up as Lan to Wan through my Xfinity Gateway. The R3 is awesome...does exactly what's expected. Turning off the filter for my preferred servers kind of stinks though. I have two network cards in my PC. A 2.5 for the R3 and a 10g for Xfinity. I unplug the Xfinity when playing COD. If I use the Xfinity line for COD and unplug the R3, I don't get the Relay issue. Just curious if anyone has a solution other than turning off the filter.

I had to roll back the firmware to get Speedtest and ping op to work. I’ll wait for the next update to test.

I had to factory reset the router. Seems to be working now. Not sure why this happened in the first place?

R3 ping optimizer and Speed Test are not working. I rebooted, restarted, etc. I cannot get it to work.

While in DumaOS, click on Device Manager, click on your device, click edit, click on the xbox icon, click save.

Ok. I ran a direct line from the isp router/modem to the R3. Here are the results. Web based, App based & OS speed tests.

Cc is active. Speeds set to: 350 up 1G down. I’ve tried everything that I could find from the forums. I figured it could be just related to the way I have the router set up on my network.

I have other devices connected to the xb8 and other switches. My pc is the only thing connected to the r3. Every device is “behind” or before the r3. The 12 port has 3 other pc’s connected to it. I get the same results whether those are active or not.

I have my setup like this...the R3 is lan to wan and has its own network. My pc is the only thing connected to it.

One active network card, connected to R3 Both network cards active

I have the R3 setup as a second router to my Xfinity XB8 router/modem. The R3 is set up lan (from 2.5G switch) to Wan (R3). I have two network cards on my pc. Both are active at the same time...one is 10g (pc to switch) and the other is 2.5g (pc to R3). I have 2.5g download 350 upload service from my isp. I understand that the R3 is 1g max...but no matter what I do, I can't get the R3 over 700+ download. Do you think having the R3 as a second router would cause this? I get the same results no matter if I have one card or both network cards active. 700+ is a great speed...but I should be hitting 800/900+ easy. Other than the speed issue, this router is doing everything else perfectly.

Changing the PC icon to Console to get the Geo-Filter to work for Xbox Game Pass is a great workaround for Call of Duty. It seems that is the only way to get the Geo Filter to work. Are there any disadvantages to leaving my PC as "Console" even when playing the game through my Battlenet account? It seems to be working fine...so far.

Hello Fraser, If possible, I would like to be added as well. Thanks

Just checked...the card was set to: 10Gbps Full Duplex I'm surprised that this is the default setting for that card. Thanks for the suggestion. I never would have thought of looking at that. Now I have it set to Auto Negotiation. I actually reordered the R3 now that I have more information on how to set it up properly.

Does the R3 support the Marvell AQtion AQC113C network card? This card is supposed to be backward compatible (10GBASE-T/ 5GBASE-T/ 2.5GBASE-T/ 1000BASE-T/ 100BASE-TX). Before I returned the R3 I owned, I wasn't able to get a signal to the router until I added an additional network card to my pc that wasn't 10G.

Hey Fraser, I forgot to put the Wi-Fi name/password card in the box when I sent it back. Will they reset that or do you need it? Let me know.

For sure. It was probably because I’m running this as a secondary router. It worked as it should but I had to add a lower network card in my pc to actually connect to it. I’m really hoping for a 10g version.

Hey Fraser, I dropped the router off at UPS today, (08/16/24). I actually was able to get it to work but it almost doubled my ping and lowered my download speed. I really hope they come out with a 10g version. I would absolutely try it out again.

Well, that didn't work. I can't get 10g out of this router. I'll have to return it.

Thanks. I’ll give it a shot.

Does the NetDuma r3 support 10gbase-t? My motherboard only uses that type and I can't get an internet connection using it. I can only connect to the router using wi-fi.