Jump to content

Monsta

Members
  • Posts

    13
  • Joined

  • Last visited

  • Days Won

    1

Monsta last won the day on July 4 2024

Monsta had the most liked content!

Basic Info

  • DumaOS Routers Owned
    Netduma R2
    Netduma R3
    XR500

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Are you checking this whilst in a game?
  2. So can you show me it now?
  3. Your DMZ is not enabled put your x box ip in for source and destination and try that
  4. So from what I can remember from reading this thread is that you are using your isp router and you have connected a R3 through Ethernet and now you have a temperamental NAT Type. I would say if possible connect your routers the other way around use the R3 as a main and connect the other through Ethernet and still connect your nodes to the router it’s currently connect to. If that’s not possible then you should go into your main router and change your dhcp range shorten it to reserve a static ip address for the default gateway of the R3 eg( ip range 192.168.77.1 - 192.168.77.250) login to the R3 assign a ip address that is out of the range of what you put in your main router eg (192.168.77.251) disable the dhcp on the R3 and assign your Xbox a ip address with your main router and also put that same ip address of your Xbox into the DMZ of your main router and if that don’t work try both routers. I know this was a bit long winded but I hope you was able to keep up and understood what I was trying to explain please try any of these method’s and let me know got you get on and let me know if you need further help. Monsta
  5. I see. Are you able to use your R3 as your main router?
  6. I get you but it’s still connected to your network even in standby. try totally disconnected the power then see if that makes a difference
  7. Hi Guys I Have 3 netduma Routers. Xr500, R2, R3. i can see alot of people having a similar problem with open NAT Type. On the XR500 there was a setting called NAT Filtering and it had 2 options (secure and open) if you set it to open then no matter how many console you had on that network they would all have open NATs. Is it not possible to have the same function on the R3? Xr500 was the only router I’ve ever used that could have open NAT on multiple consoles it was amazing you didn’t have to port forward or DMZ it just worked.
  8. Try unplugging his console then reset your router and your Xbox and see if u get a open nat
  9. Try Changing your DNS on your ps5 8.8.8.8 8.8.4.4 1.1.1.1 1.0.0.1 try these
  10. Do you have more than 1 xbox on your network?
  11. Is your ps5 been seen as a PlayStation by the router?
  12. No need to disable ipv6
  13. I believe it’s a port problem but is solved if you change your dns on your ps5. I used my default gateway as primary and 1.1.1.1 as secondary and it’s working. i hope it works for you too mate monsta
×
×
  • Create New...