trixr1907

Hi there, I have noticed that the automatic WiFi channel selection does not always seem to choose the optimal, least congested channels. This has led to occasional performance issues in my network. I wanted to ask if there is a way to perform a WiFi channel scan manually with the R3 to identify and select the best channels? If this feature is not currently available, is there any plan to implement it in a future firmware update? Such a feature would be incredibly helpful, especially for users in areas with crowded WiFi networks. I look forward to hearing your thoughts on this.

as i said, i haven't just had the problem for 2 months (which is a long time) but for almost the whole year. i can't remember if it was like this at the time of release, because in the beginning i didn't mind restarting the router quickly

Hello, i still have every day this fucking disconnects. When will be this fixed.I simply cannot understand how this problem can still not have been solved in almost a year. In addition, for a few days now, every restart has been a lottery to connect to the Internet. In the past, it usually worked after the first restart. Now it sometimes takes 5 restarts or even more

Okay, thank you very much. Yes, I don't use a switch, only recently a home server which is connected after the router. The cable from the TAE socket to the modem and the cable from the modem to the R3 are both 2m or less. The last point is most likely to occur; I remember when I once had a download around this time. I've also observed this when I turned on my IPTV box or even just the phone's Wi-Fi during this time period.

I have added 5 screenshots from my HomeAssistant which show that there are repeated disconnects at similar times. Unfortunately, I do not have the complete log from before the disconnect. I don't have much time to search the forum, but is this a known issue or is it unique to me? I have tried many methods to find the error on my end, but without success. It would be helpful to know if this is a general problem and how far the team is in resolving it. Are they still investigating the cause or have they made progress? Would remote control help the team in my case, given that the disconnects happen at these specific times? I assume they might also be off work in the evenings. I would appreciate an update on the current status, the reasons behind this issue, etc.

when will be fixed this problem? i have still the issue that disconnects in every evening. I believe that this problem has not only occurred since this firmware update, but has always been present. It's nice to have an R3 with its features, which all work for me, but it's annoying that it keeps disconnecting. Lately, it's not just the disconnects, but after a restart, it's a matter of chance whether it connects at all.

Unfortunately, the problem still exists, despite changes. Extremely annoying, just on Sunday in the middle of the 2nd half of the European Championship final another disconnect. The current situation is that even after a manual restart you have to hope that it connects. If the team can't find a fault, is it perhaps the hardware itself? Are there any observations as to whether, for example, people who ordered earlier are more likely to be affected?

no im using no switch, simple setup Modem (Dreytek Vigor165) in bridge mode -> R3 What makes you think that?

hello, i haven't been in touch for a while, but the problems are still there. i also used your tip, but it didn't help. have you received any feedback from the team in the meantime? i'm attaching a log from this morning R3_2024-06-30T09_05_51.888Z_logs.txt

ok, today i have no disconnects. i will disable it when the old problem comes again

no, im living alone and it often happens when i look iptv, play games or whatever. yesterday it was one disconnect in the midday which is rarely at this time.

Today i Had 2 more disconnects...

Retry led to loading error, after a restart continued to the dashboard + internet worked then i deactivated ipv6 (WAN+LAN) and it worked wonderfully afterwards ...but only until just now, when I had another disconnect. when i tried to access the interface this screen appeared after 5-6 min still nothing happened... i tried the same on the phone, both via the app and the mobile browser - both failed. then i did a reboot, after that i got this screen again after clicking continue i had access to the interface again, but no internet connection. only after the 2nd manual reboot did both work again (interface+inet connect) i'll add 3 more logs, the first one R3_2024-06-16T21_38_29.557Z_logs.txt directly after the disconnect, the second one R3_2024-06-16T21_39_30.532Z_logs.txt a few minutes after the DC and the last one R3_2024-06-16T21_40_38.745Z_logs.txt after the successful second reboot /e: I still have remote access active. it is running now, but as i said only after the 2 manual restarts. tomorrow is a new day and i think it will happen again

my setup at time of the screens(modem) R3 was not connected

Wäre gut, hast du den Vigor im Bridge oder FullBridge Mode? Vorher hatte ich das Modem im Bridge Mode und nur dort das VLAN (7) eingestellt. Jetzt ist das Modem im Full-Bridge Mode (VLAN+DHCP deaktiviert) mit VDSL only Einstellungen. Die richtige und neuste FW ist auf Vigor installiert. PPPoe Einwahl habe ich schon immer nur im R3 eingegeben. Ich glauber aber inzwischen das es nicht das Problem mit VLAN ist, kenne mich da aber auch nicht so genau aus. Btw besitze VDSL 250 von o2