FingerTester

Sorry I should have been more specific. I didn't change any settings in the last month or more. I wanted to forward a port for a game but couldn't as I cant get into the router. Did you check the logs with the last router I got a replacement for? It seems to be the same issue I think? I don't use the geo-filter VPN or traffic controller or anything.

I'm not too sure. The router has been running fine for maybe atleast a month without a restart? I needed to change some port stuff a few days ago and now I just cant get in the interface. So within the last month most likely...

This worked to get the log file thanks. @Netduma FraserI've sent the logs in a PM. Looks like the same hybrid VPN issue as before with the last router?

I get the same error then I hit continue anyway and it just loads forever the same as my previous image.

Tried edge, chrome, and a chromium fork. All three have the same issue. App just says "Unknown error" when I try to log in.

This is what happens when I try to get logs or update the router.

DumaOS 4.0.540 I cant click anything when I get into the web interface and I don't see where to grab the logs in the recovery options before that.

The router even after rebooting is giving me errors getting into the interface saying it cant load things like the previous router did before it died. After refreshing the page and clearing the cache 20 times I finally got in after clicking continue anyway and there's some errors on the top right. Anything I can do to fix it? Some Router features are not running Device Manager BI

I don't use that setting on the router.

3 computers and 3 phones I believe and I think there might be a smart lightbulb and maybe a streaming box too. Not even sure what HVPN is so I don't think so?

I cant get into the interface anymore even after a factory reset. Check my DM for more info. I'll continue using this thread from here on out.

You mean like a different home? No I can't, sorry.

It's done this on every firmware version since I got it and I bought it nearly when it released. I'm in the early access forum too so I get nearly every upgrade for the firmware. Is there a big difference with going backwards when I was just one update behind before I got the newest version? EDIT: Okay back on .290 firmware with the laptop next to the router and 280mbs this morning......

I'm on my 2nd hard reset.

All 3 devices, laptop, pc tower, and a phone are wifi 6 or 6e.

Yep just like that. From the three dots on the top right I disabled it.

I'm not sure where congestion control is at. Smart boost has been fully disabled since it gave me issues some patches ago. One of the first things I did was disable smartboost after the factory reset.

Okay I'm in after the factory reset. Got my channels setup the same way they were before. Turned off all of the protections in trouble shooting. Testing with a laptop nearly touching the router still and 270mbs down / up on the speed test with 5ghz wifi 80 channel width on a channel with 0 competition in the area.

It just gets stuck at "Generating Report..." I've waited about 30 minutes and it's still doing that. Is a factory reset my only option...?

Extremely poor timing..... but I cant get into the interface anymore. I just keep getting critical error. Updated to the latest firmware a few days ago. Ctrl-f5 doesn't work and I just get a critical error if I try to continue.

I have an ONT (Nokia ONT XS-010X-Q) with fiber that's in bridge mode so the router is handling everything. Ethernet I get extremely close to the full gig on DSLreports, google speed test, and on the router test itself, etc.

Since I got it. Its on the latest firmware now though.

Yeah I've done all that. I've read through these forums trying every fix I could find basically. Speed is best on 160 width of course (But its still less than 400mbs) but range becomes just the room the router is in. I have it on a shelf high up with nothing that could block the signals. Antennas are in the right position etc. I'm also out in the middle of nowhere on a big property so there's 0 wifi besides mine. Wifi analyzer is empty besides my signal. Swapping back to the XR500 and problem is instantly fixed. It only gets like 900mbs but its a lot better than 300.

Does anyone else's R3 just have extremely poor range and speed? With my laptop nearly touching the router and after messing with the settings for hours the max speed I've been able to achieve on a 1GB up down fiber connection is 300mbs. This is after messing with every channel, 5ghz, 2.5ghz, splitting the bands, disabling ipv6, smart boost fully disabled, etc. I've kind of been holding off on posting this since I figured an update might fix it but man..... it's getting old.... I'm to the point of just using my old XR500 because the wifi range is at least 3X and actually can hit nearly full gig speed.

11 hours later just the wireless network has slowed down. My phone on top of the router using wireless is pulling 90mbs on a 1 gig network. CPU usage is completely normal same as before. Speed test on my PC plugged directly into the router produces gig speeds up and down.