khola

I have tested multiple values already, with upload and download all the way down to 35%. Modem is Technicolor CGM4331 set in bridge mode, modem doesn't have an option to add R3 in its DMZ since the modem is bridged and being used only as a modem.

Unfortunately this does not help at all, I have the console setup as the only device with the highest priority following your video tutorials on YouTube.

Yeah, seems to be consistent. Rebooting router makes it go away for a few matches but it comes back after, never had this issue on the XR1000.

Ping stays consistent 30 - 35, issue is player is lagging or skipping. Typically when this happens you would notice a huge ping spike or packet loss but this is not the case here at all

Player is randomly skipping (Gameplay hitching), I'm not getting any in game packet loss or errors while playing MW3. Friends voice chat in PS5 party is also lagging, not sure how to troubleshoot this issue and I want to avoid rebooting router everyday.

Why is reservation capped to 20 Mbps for download and upload? We should be able to simply "Select Device > Adjust QoS for said device". For someone that has IT experience it feels like I'm navigating through a maze to limit bandwidth on devices. The current user interface is extremely complicated for no reason at all. With the way the UI is currently setup you navigate to SmartBOOST > click three dots top right > Click manage profiles to manage current "Favorite" (Default profile) > click on profile > add device > click off screen > click "Bandwidth reservation"> Add reservation > choose device > Choose Target [Why????] I simply want to limit the bandwidth of my devices without the need to select the target for the device... We should be able to limit bandwidth per device similar to how ASUS has it set up:

Here's what's happening exactly. Scenario #1: Geofilter enabled with Geolatency off - "Searching for a match" to "Connected" it connects to a server outside of the GeoFilter and then disconnects and the "Searching for a match" message appears again until you find a server within the highlighted area in Geofilter. Once the match is over you will receive a -200 SR in addition to the SR earned for winning the match. Basically player gets penalized because its not connecting to the server the game wants you to connect to. Scenario #2: Geofilter enabled with Geolatency on - Can connect and play normally without losing SR, however it picks servers outside the selected range, basically Geofilter is not working.

When Geo-Latency is enabled GeoFilter doesn't work, this is all not making sense at all.

Search goes from "Searching for a match" to "Connected" it connects to a server outside of the GeoFilter and then disconnects and the "Searching for a match" message appears again until you find a server within the highlighted area in Geofilter. Once the match is over you will receive a -200 SR in addition to the SR earned for winning the match. Is there a way to prevent this from happening? Tested with Geofilter off and it doesn't occur.

Not working for me, getting "Unknown error". Rebooted router and upgraded to the latest firmware v4.0.41.Did another reboot and I'm still getting this error message when attempting to add UDP port 3074

- Did another factory reset and am able to see traffic prioritization now - This is the 9th factory rest and I've only had the router for a month now, I shouldn't be factory reseting the router every other day because something went "broke" inside the interface. - Limiting Upload speed on devices is still not working even after disabling both Download/Upload Excess, this was tested on multiple devices (iPhone - Private Address Off, Mac Airbook, Windows Laptop & Desktop on both Wifi and Ethernet, Playstation Ethernet) - The waiting times are too long after saving a setting as well, mind you this was done after a factory rest. There should be no excuses here.. I have to wait 30 seconds per each Download/Upload QOS change. On Asus am able to update multiple devices in 30 seconds. - Making multiple changes will start to give the error message "The operation is taking longer than expected. Please briefly wait before using this Rapp." (Again this is after a complete factory reset)..

This was already done "Set Retry attempts to 5 under System Information > Installed Rapps". Rebooted router again, this section (Traffic Prioritization) is still loading infinitely

Traffic Prioritization section under QOS is constantly loading and does not load. It's a spinning loading icon under this section.

Share Excess for upload is disabled as well, it just doesn't work. The devices am attempting to block is an iPhone.

Thank you. 1. This was indeed determined by a speed test. Looks like disabling share access has solved it out! (Only for download speed, upload speed is acting weird even after saving it only applies to one device) 2. Correct, am attempting to block device under device manager. 3. Armor is disabled. Attempted clearing cache & cookies, speed has improved a bit but still considerably slow. 4. Accessing tabs, saving changes. Anything that has to do with making a change or accessing a section is giving me this error; - Clicked to uncheck Download share excess - Set bandwidth limit for a specific device or Accessing QOS section

Thank you. 1. This was indeed determined by a speed test. Looks like disabling share access has solved it out! 2. Correct, am attempting to block device under device manager. 3. Armor is disabled. Attempted clearing cache & cookies, speed has improved a bit but still considerably slow. 4. Accessing tabs, saving changes. Anything that has to do with making a change or accessing a section is giving me this error. I'll share a few screenshots below for reference: - Clicked to uncheck Download share excess: - Set bandwidth limit for a specific device or Accessing QOS section:

Having multiple issues with the XR1000 Router.. 1. QOS settings do not apply; Am trying to limit bandwidth per device and when saving the limit it does not apply to the device 2. Block Device does not work; also unable to block device from router interface unless using the Nighthawk app 3. Very slow user interface, this is way slower than any other router brand I've used in the past 4. Constant error showing when saving any change made on the router interface "The operation is taking longer than expected. Please briefly wait before using this Rapp." or "Device Not found" What I've tried so far: * Use http://192.168.1.1/ to access the router interface * Reset Router > Update router (XR1000 1.0.0.64_1.0.49) * Rebooted Router multiple times * Set Retry attempts to 5 under System Information > Installed Rapps