Deasha

Thought I’d give you an update as well, its round 5am my time with no internet traffic. I was pulling consistent 200 down and 45 up when wifi testing this morning

Hey mate, managed to run the test over breakfast. My channel over 5GHz is very isolated, shouldn’t be any issues stemming from that. I’m the blue all the way to the left

I’ll give that a crack after work I did take note that when I ran the 5GHz wifi testing on my XR500 I was using the same channel and Freqiency bands as the R2. I was running 80hz frequency and channel 44 on both

I disabled all of the settings relating to that stuff in the network tab, in the wifi tab and under the iCloud tab as well as settings in safari it’s self. They were everywhere Also did a power cycle on the router and my device. I seem to be getting better results, I can hit around 215 down at the moment. I also just ran a test on my work laptop (acer) and it seems to be getting around 50b more than apple devices. What do you think about getting around 215 down standing next to the router on 5ghz? I’m thinking something’s still not quite right looking at the xR500 results. I know it’s more of a powerful machine, but it’s significantly lower

Me again, haha I’m so sorry for all the messages! Wifi speeds have progressively gotten worse, can’t get higher than 77down. Wired is still 800+ which is fantastic! I tired turning off a few of apples settings in wifi to see if I could emulate what I did with the wired but no luck

Hey mate, I just stumbled across something very interesting. I was trying to break down why my result was so good at the beginning so looked into everything that possibly could have affected it and I remembered seeing a pop up for apples iCloud private relay turning on. Basically it hides your IP address. So I toggled it off and my wired speeds went up to 850 -915 down and 44 up constantly over wired!? 5GHz wifi was unchanged still getting very low speeds averaging around 100 down and 22-25 up

Checking back in. Firstly did you have any tips for losing WAN connection when you reboot routers? I’ve had a shocker with the R2 and XR500 wirh trying to get them to detect the internet. Any tips would be greatly appreciated Ok, so new firmware is installed, I haven’t set up any QOS, ping optimizations or network speeds. I ran my first ookla test on wired and got 884 down and 36 up which is fantastic! I thought we finally fixed it! But I then ran a 5Ghz wifi test and got 200 down 36 up which is low considering the XR500 was around 430-500. I then went back and tried a few more tests, wifi dropped to as low as 95 down and 15 up, but consistently got around 200 down. I went back and tired some more wired. And it was consistently getting around 350-400 down and 43 up? Seems like initially it was working where it should be, but went right back to being around the same results as before the update? I’m stumped. It is an hour or two latter in the night so maybe there is more internet traffic, but going from 884 down to 350-400 down on the same wired set up seems odd

Hey mate, just got home and got the XR500 working, during peak times I was consistently getting 430-500 Mbps down and 36-40 up over wifi. And on a wired connection I was consistently getting 600-700 down and 40-46 up. All tests were done from the same location in the house on the same devices as yesterdays tests. Also done with Ookla speed test. The speed is pretty much doubled on the XR500 compared to the R2. Going to go ahead with the early access firmware. I’ll check back in with you once it’s all set up Cheers, Dean

I just completed the sign up, if you could approve that I’ll be able to go ahead and run through those steps after work and get back to you with the results Really appreciate it mate

I just tried hooking up my old ISP router and can’t seem to be finding a WAN IP. I have to head off to work, when I get home I’ll get it up and running properly and run the test. Is there any other tests or things you would like me to try after work as well? This way I can get back to you during your work hours with a bit more info

I did a few tests from my smart tv and phone out of curiosity but test results showed the same I’m not familiar with those terms, I think my ISP runs on standard DHCP

Hi mate, sorry for the late reply. I just got home from work and finished running some testing. I ran three tests for the following, 5ghz Wi-Fi, port 1, port 2, port 3 and port 4. QOS was turned off for all testing. I ran a speed Ookla (third party speed test), Netduma QOS auto detect bandwidth speed test and the Netduma benchmark test for each. I chucked them into a table so it’s easier to understand. Please see attached The Wi-Fi speeds seem slow to me considering I pay for 1000 Mbps down and 50Mbps up. On my XR500 over Wi-Fi I could be around 400 down, with way better consistency. Running wired I could get up to 917 down. Going over all the data there is massive inconsistency with any test run on Duma Os which makes it impossible to use any QOS feature becuase it varies so much. And my speed over wired using Ookla is only getting around 250 - 300 Mbps. Seems very low for wired Thank you in advance, DeanNetDuma R2 Speed Test.pdf

Thanks for getting back to me Here is a screenshot of the device manager table. I connect my MacBook or Xbox series X through Ethernet on port 1

Here is a few examples of this, these tests were run about 30 seconds apart. It finally came up with a result that I think it’s accurate (on the left) and then 30 seconds after I ran the same test and with a totally different result (on the right). Most of the time my speeds are something resembling the result on the right. Thought this might help explain it further. See attached

Hi Netduma, I was just wondering if you could please help me with something. I recently purchased an R2 Router from you this week, I’ve set everything up and honesty love your products and OS. But I am having problems with my download and upload speeds. I’m getting really low downloads and uploads both wireless and wired. This is with your OS network speed test as well as other third party websites. When I first set up my router in the wizard and ran the speed test and it was what I believe to be accurate with 800 down and 40 up. The scores it’s giving me now is 70 down and 9 up. Any help would be much appreciated. Thank you so much for the your hard work and products. Looking forward to hearing back Dean