Paul Maos

@Kingzzy@Netduma FraserIT WORKED!! thank you

I do have a question as well. If I would like this to be on the VLAN 6, here is the TOPOLOGY in the port. How would I set this up if I wanted to get my Netduma and the ps5 through a VLAN

User and password is: 1
 

I usually have the ps4 off then boot it up once I configure the vpn. But I don’t think it has to be off. 

Hey @Pumpkin_DG - Do not use GEO filtering at all. Leave that off. Just use Hybrid VPN and under the advanced tab select OPENVPN

@rob wHey there. Make sure to use this settings. I've come up with this after months of trying. Ofc all of this was made for console people trying to VPN without loosing any connection, but still spoofing their location. If you're on PC and you use this settings it's actually beneficial just because you're only VPNing the WZ app, not the whole PC, might notice some differences when browsing since the 443 port affects https domains. Please copy paste the settings below, make sure you don't overlap ports and it will work (with all VPNs, any location). @RobBobIf you are on PC, it makes sense. You should really try different locations during the day and see which gives best results. Idk how or why, but it really makes a difference on the matchmaking side. NoLag is good and pretty consistent during early hours and afternoon, but if you play at night when the sbmm works at its best there's close to nothing you can do, as far as I know.

@Aurvey which VPN are you using? No lag?
if so, please use the instructions I sent in this forum, and use the port settings image from IBPxx. 
 
after that it will work.

yah it works, i did the same setup as him !!! , just connect and pla just normal. 

Nah it's chalked, it has to be something with the hybridvpn tab @netduma fraser
 
It was working flawlessly before last night

Wanted to updated the ticket. Thanks to @Netduma Fraser & @IBPxx for all the help, without you both I would of been going crazy. So again all credit goes to them both!
Hopefully the steps below I did helps @shinigami_93@Lolitahell if not please feel free to comment on here.
1) I removed the device (playstation 4) & the Service Ports
2) Rebooted netduma router
3) on Device Manager I selected my PS4 and switched the DEVICE TYPE as TV (This allows you to ADD SERVICE and enter the COD ports via the VPN Service Selector through HYBRID VPN) 
4) Go to HYBRID VPN, then ADD DEVICE (PS4 or XBOX)
5) Then select ADD SERVICE, under the VPN Service Selector click on advanced then enter the COD ports. I added a screenshot of my PS4 ports for anyone who is on playstation to use.
Just a note to enter the following under source port:
Source Port
Start: 1
End: 65535
Destination Port (here is where you will enter COD ports) here is one example for when entering ports for my PS4 below:
Start: 80
End: 80
6) Once the ports to your given console (PS4 or XBOX) are added. Go to device manager and click on your console and switch the DEVICE TYPE to Playstation.
7) Go back to HYBRID VPN, select VPN Set up. Then select Advanced followed by VPN Type: OPEN VPN
😎 NoLagVPN site states to use 1 for both the USER & PASS on Netduma Routers
9) Next, copy your entire .opvn file into the configuration
10) Then click on CONNECT, and make sure you have selected ENABLE under VPN TYPE
11) DONE!! 
These steps worked for. I have included an image of my settings for port forwards for my PS4. Please feel free to use. Again please note to use the correct COD PORTS for your console or pc. 

@Netduma FraserI've been playing around with the Duma Os that much that I can grant you that if you apply the HybridVpn to the whole Playstation or Pc your internet connection will get killed if you're spoofing to a further location. And I wonder why but if you select a device, pick the right ports it will spoof the location for the game, but if you instead go and open the ports on the regular "port forwarding" tab, it won't work. Additionally, if you overlap them nothing will keep working. So I can confirm that if you don't open specified ports switching around in the device manager and then go back to "playstation" device you won't have a good experience or the game will simply tell you "Can't find any server in your area". 
@Paul Maos Yes it's now working fine again with Nolag, Cyberghost and Express. Btw yeah experimenting stuff around I found I could get basically my real connection, matchmaking ping and so on only when port forwarding TCPs only and still getting the in game location switched to the OVPN file I picked. Let me know if adding the 443 port makes the trick for you or not. 

Same here, with others vpn providers. No IP in the Open config file VPN

Good morning everyone.
My friends and I have been using the HybridVpn tool on all of ours devices (two R2s and a Netgear router), and can confirm that isn't anything related to COD updates.
Right now there's no VPN config able to work through the Duma software (no Cyberghost, Express, Nolag etc..) based on what we've tested. Maybe it's just a bug on Duma's hand.
The HybridVpn tool is simply no longer working all of a sudden. Hope it can get some love very soon, because it's honestly a great feature that I think most of the duma users enjoy using and test stuff around.
 
 

I think I got it solved, try and add tcp 80 and 443 on your list @Paul Maos. Vanguard still running on the same settings as before, but I think they slightly modified WZ. These are older ports they claimed to use on older titles. Make sure you don't overlap them with other settings you have outside the HybridVPN tab. Btw checking your settings what's the impact you have on your connection while playing? I'd suggest you to reverse those UDP to TCP so you won't get any connection issues and you'll be just spoofing your recognized location, obviously that's not great for what the VPN was made for but it actually works fine for gaming.