Jump to content

Daniel87

Members
  • Content Count

    60
  • Joined

  • Last visited


Reputation Activity

  1. Like
    Daniel87 got a reaction from Netduma Jack in Ps4 2playstation probs   
    I have been reading your responses
    i know i dont use the port forwarding because i know thad dmz and upnp are doeing the job.. i will try the next step Frazer is talking about using ONE ps4 into the Geo. The thing i noticed is when the first platstaystion is started its more like it gets the open port and the other ps4 gets the moderated port so i think its something wierd but to be honest i would be just happy and cool with us staying in the geo filter..finding games dont getting kicked out.. anyway i will try it today.. i know i played today some matches and the last game was really destroying the connection like lagging like 3-5 seconds freezes and thinks like connection intteruption BUT the game didnt disconnect i whas like huh first time but i know thad i had only mine ps4 in filtering mode and 2nd ps4 whas in spectating mode now.. this happend the 3rd match so i geusse things are changing..
    The thing is i dont see the second ps4 on the geo filter... so i cant whitelist it.. i can try put the sliders to 100%..
    Going to try it out later see what happens..
     
  2. Like
    Daniel87 got a reaction from Netduma Fraser in Ps4 2playstation probs   
    ok i will do thad

  3. Like
    Daniel87 reacted to Netduma Fraser in Black Ops 4 Geo-Filter Cloud needs your help!   
    Hi all, 
    I am in the process of going through all the Black Ops 4 servers available to determine if they are classified correctly i.e. Peer/Dedicated and to ensure they're in the correct location. I believe most are correct. However, I need a lot of ID's/IP addresses in order to do a thorough job of making sure once a cloud update goes out that I've got everything accurate the first time around. So please if you get a chance to help provide the following information by following these instructions (Written for PS4 but works on Xbox & PC). Even if you only have time for one it will be very helpful.
    Wait on the console dashboard Have the Geo-Filter set with Filtering Mode on, home location in the ocean, strict mode enabled. Auto Ping disabled. Boot up Black Ops 4, when it gets to the point where you have to click 'x', click x and then look at the Geo-Filter. You should see all the servers on the world map.  Click on any one of these servers then collect (please only post in this format or it will be hard to follow):
    Server location on the map
    Host Type
    ID
    Domain
    Ping 
    Your location Once you've collected this, quit the game application completely so you're back on the console dashboard and repeat. The more information we get from users the more accurate we can be when we do a cloud update. Post the collected information here. Thanks for your help!
  4. Like
    Daniel87 reacted to Netduma Fraser in NAT issues   
    It does have a DMZ mode so you could put the R1 WAN IP (found in R1 System Information) into the DMZ and that will help with NAT.
  5. Like
    Daniel87 reacted to e38BimmerFN in NAT issues   
    Blokkeer gefragmenteede IP-Pakketten is Block fragmented IP packages and can be disabled as well. I believe Firewall and uPnP need to be disabled here. The DMZ address should be what the R1 is getting from the ISP modem. So be sure to look at the R1 and see what IP address it gets on its WAN port. This is the IP address that should be input here in the modems DMZ. 
    Ask your isp if they have a modem only that they can give you to use. You need to not use a modem with a built in router if you want to use the R1 and game well with OPEN NAT. 
  6. Like
    Daniel87 got a reaction from Burger100 in NAT issues   
    ok saved restart ps4?
    again deleted device and turned off geo and strict and flushed ps4 turned off
  7. Like
    Daniel87 got a reaction from Alex49H in NAT issues   
    it work again
  8. Like
    Daniel87 reacted to Netduma Fraser in NAT issues   
    Click the 'i' icon on the top right of the interface and you can reboot from there
  9. Like
    Daniel87 got a reaction from Netduma Fraser in NAT issues   
    ok i did this i see the ip adress  on my ps4 now
  10. Like
    Daniel87 reacted to e38BimmerFN in NAT issues   
    If your changing the min and max range for DHCP IP address pool, then yes, change this. I believe default is .1.2 thru .1.254. You can change this to .100 thru .200 and have plenty of room for statics on either side. Then set up the IP address for the game consoles with in the pool. I like to use .198 and .199 for mine. Works well. You'll need to power OFF then back on the consoles after making the change so the new IP addresses show up on the consoles. In fact turn all devices OFF accept for your PC that your using to configure the router. Once changes are made and you reboot the router. Then re-connect the devices. 
     
    To specify the pool of IP addresses that the router assigns: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the router admin user name and password. Manage the Router’s Network Settings 75 XR500 Nighthawk Pro Gaming Router The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The Dashboard displays. 4. Select Settings > Setup > LAN Setup. The LAN Setup page displays. 5. Make sure that the Use Router as DHCP Server check box is selected. 6. Specify the range of IP addresses that the router assigns: a. In the Starting IP Address field, type the lowest number in the range. This IP address must be in the same subnet as the router. b. In the Ending IP Address field, type the number at the end of the range of IP addresses. This IP address must be in the same subnet as the router. 7. Click the Apply button. Your settings are saved. The router delivers the following parameters to any LAN device that requests DHCP: • An IP address from the range that you define • Subnet mask • Gateway IP address (the router’s LAN IP address) • DNS server IP address (the router’s LAN IP address)
    https://www.downloads.netgear.com/files/GDC/XR500/XR500_UM_EN.pdf
  11. Like
    Daniel87 got a reaction from Netduma Admin in NAT issues   
    ok i try it out tommorow thx need to go work
  12. Like
    Daniel87 got a reaction from witton90 in NAT issues   
    ok i try it out tommorow thx need to go work
  13. Like
    Daniel87 got a reaction from Netduma Fraser in BO4 R1/Dumaos High ping and GEO not working   
    ok i will look out for this if i connect to a peer!
    goin to play some more matches..
    have to work night shift if not today i will respond tommorow
     
×
×
  • Create New...