lefteris.lydios Posted February 8, 2015 Posted February 8, 2015 Everything worked OK. But now I cannot see any UPnP listings. Any ideas?
lefteris.lydios Posted February 8, 2015 Author Posted February 8, 2015 Upnp Forwarding in misc settings should be ticked?
Guest Netduma_Iain Posted February 8, 2015 Posted February 8, 2015 you don't need to tick that Greco, but in "Settings > UPnP" is it enabled? If so make sure the PlayStation/xbox is using automatic IP settings not manual then you're UPnP should be populated when you reboot
lefteris.lydios Posted February 8, 2015 Author Posted February 8, 2015 Still nothing . In DHCP Lease I have assigned a number for my console. Should I remove it as well?
Guest Netduma_Iain Posted February 8, 2015 Posted February 8, 2015 I don't think that should make a difference, but can you try and see if it helps please.
lefteris.lydios Posted February 8, 2015 Author Posted February 8, 2015 I'll check. One more thing Iain. Whenever I have no UPnP listing, PS4's network test, shows a significant speed drop. Do you think it's relevant ?
Guest Netduma_Iain Posted February 8, 2015 Posted February 8, 2015 Honestly just ignore the PS4 speed test it has a mind of its own. UPnP should only impact your NAT buddy.
lefteris.lydios Posted February 8, 2015 Author Posted February 8, 2015 Yeah buddy. I know what you mean My NAT Type is 2 and I have a Moderate Nat type in game (AW). I use the standard procedure. Disable GeoFilter-->start game-->enable GgeoFilter. To be honest, my overall gaming experience is good.
Guest Netduma_Iain Posted February 8, 2015 Posted February 8, 2015 NAT Type 2 is open buddy, you're all good to go See the bottom of this page mate http://wiki.netduma.com/doku.php?id=how_do_i_open_my_nat
lefteris.lydios Posted February 22, 2015 Author Posted February 22, 2015 Hey.. Did some testing during this weekend (concerning my UPnP page not showing any listings) and I had some good results. First off I managed to have UPnP feedback as shown here: The above list popped up when I cleared all my wan settings.... But now I get a random IP adress .... meaning I cannot DMZ my R1 since I'm not sure about it's address. Strangely NETDUMA's web page loads OK with 192.168.88.1 which I used from day 1 even though the pic above shows 192.168.88.4 I'm not complaining or something. I had lots of fun with COD games. I'm just trying to fine-tune my beloved gadget. Any suggestion-ideas would be welcomed
Guest Netduma_Iain Posted February 22, 2015 Posted February 22, 2015 Hi Greco! Hope you're well mate. That setup is very very strange I'm suprised it's a Working, I'll be in chat this evening if you're available I can help out
lefteris.lydios Posted February 22, 2015 Author Posted February 22, 2015 thanks for your concern mate.
Guest Netduma_Iain Posted February 23, 2015 Posted February 23, 2015 Sorry buddy that I missed you, when will you be available for a chat?
Guest Netduma Fraser Posted February 23, 2015 Posted February 23, 2015 Just an update - NAT and everything is fine so nothing to worry about there. However Iain will look at UPnP tomorrow due to its odd behaviour. In regards to the WAN IP Sgt-Greco provided this picture.
doylebl Posted February 23, 2015 Posted February 23, 2015 My wan ip is different as will Iain and I log in with 192.168.88.1 as well. I thought this was normal ?
Guest Netduma Fraser Posted February 24, 2015 Posted February 24, 2015 My wan ip is different as will Iain and I log in with 192.168.88.1 as well. I thought this was normal ? Yes accessing the control panel with 192.168.88.1 is normal
Recommended Posts
Archived
This topic is now archived and is closed to further replies.