Glen

Device connecting to the guest ssid on smart modem gen3, do not show up at all in network monitor, nor does the total usage traffic count for upload/download eg if the guest device is using all the B/W , network monitor is showing everything idle from the other device. in device manager, the MAC of the guest device is shown as offline, as well as a Wired device , be it online or offline tried toggling Show Modem Traffic, no change. would expect at least the Total Usage would show the traffic rate in/out of the WAN/internet interface ? Board Model CobraXh Firmware Version 21.4.0500 DumaOS Version 3.3.688 Type MAC Address IPv4 Address Connection Type Online Status SSID Frequency Signal Strength unnamed device Computer 96:4B:37:A6:C1:B9 N/A Wired offline n/a N/A N/A

Have run into this with a new gen3 modem as well (old gen2 died), also did a factory reset, toggle it off/on in mytelstra; needed to launch a private browser window to get out of the redirect loop. also some oddness where the setup wizard doesn't seem to complete (needing to skip the optimise now part) and doing a benchmark only seems to do the ping tests and not the underload or speed. , Also tried running Ping Optimiser via an iphone, and it fails with "Ping Optimiser has encountered a problem. Internet Optimiser is unable to complete the Ping Optimiser process due to external circumstances" can see in the log messages the only thing that correlates is either these, after it ties to do the first of the 6 tests to set the best settings daemon.err cli.lua[25687]: Connect error: Connection timed out daemon.err cli.lua[25687]: Connect error: No route to host added log as an attachment, with some noise removed and a screenshot of previous benchmarks that only show the Ping results Board ModelCobraXh Firmware Version21.4.0500 DumaOS Version3.3.688 log-1739585718228.txt

Hi @mannrs Looks to be working after doing the cloud resync, can see speedtest ipv6 traffic, as well as foxtel (though showing as unknown instead of as foxtel in media, maybe its not classified, but its now showing) thanks for adding me to the testers list.

Hi Liam, They are connected via Wireless, however even on a wired (usb-c ethernet dongle) laptop it occurs. Running a speed test to a Telstra server also defaults to ipv6 and doesn't show any activity. You can see throughput doesn't register for ipv6 vs ipv4, which shows for both the device and overall activity. Not sure if the Autoconfiguration uses the interface utilisation to trigger or not? Suppose I set congestion control to ON and limit upstream to 10Mbit. In that case, it seems to shape the upstream for ipv6 to ~9.46Mbps and ~9.61Mbps for ipv4, so hopefully, only a display issue and everything else internally is working as expected.

Hi, When monitoring the bandwidth utilisation it’s not taking into account traffic that is using IPV6 . Foxtel and Netflix doesn’t show , even as unknown traffic ,as they prefer to use IPV6 . using the smart modem graphs you can see the traffic flowing on the interface whilst net duma is showing utilisation as idle/nothing when netflix / foxtel streaming is happening . DJA0231 , 20.3.c.0432 , 3.2.126+2