cbntlg

Yes, I still had the issue without the R2.

I've given up now. Friday was issue-free. Sunday, the problem was back, as bad as ever. Today was bad, but only at clse range. I made no changes throughout those days. I'm pretty sure it's netcode, but I'm not interested in playing any other online fps. So I'm just going to live with it until I've done all the weapon camo challenges and then move on to some single-player PC games. STALKER 2 and Avatar:FoP look good. Thanks to everyone who tried to help.

I don't know what this means. I'm not using any wireless devices. Discord is not linked to the console. I really appreciate your help with this. It would be fantastic if I could find a solution and play the game properly.

Thanks, but I've tried many different configs and this happens on all of them.

Here's a video of the issue. I'm trying to turn whilst shooting. I can strafe, but I can't turn.

And just got disconnected with the <LAN cable not connected> error, again. 😒 I'm wondering if it's just Activi$ion's poor netcode? But if so, this would be a common problem, but I haven't found anybody else on the web complaining about it?

Still can't turn whilst shooting at close quarters. 😒

Somebody on the XIM forums said that the PS5 is known for having slightly oversized LAN ports and suggested wedging the LAN cable. I checked, and most of the LAN connections on my devices are a bit loose. So I've wedged them with cocktail sticks, and that seems to have worked for the disconnects. 🤪 Still having the turning whilst shooting problem though. It's ruining the game!

Update: I factory reset mu R2 and I can now access the web and DumaOS.

I've completed the the steps you suggested and put the R2 WAN IP in it. "What do you mean it can't connect to the internet exactly? You don't need internet to access the interface" When I had the R2 as a switch, it's internet LED wasn't on and my browser link to DumaOS wouldn't connect. Now that I've set it up as you advised, the internet LED is on but I still can't access DumaOS. Neither my PS5 nor my Matrix can find an IP adress.

I have an R2. I don't know how to put it into modem/bridge mode. I've assigned static IP addresses to the XIM Matrix, PS5 and the MS Surface Pro 6 that I use to monitor DumaOS. All are connected to the R2 and can be seen by the PowerHub's browser-based OS. The R2 can't connect directly to the internet though, so I can't open DumaOS on my Surface Pro.

Mouse is Swiftpoint Z (I've tried 2 and the G502 Proteus and a G903). Keyboard is an Allreli T9+ I have tried without the XIM and I still have the same issue. I'm on the latest DumaOS4 (I installed it a few weeks ago) I don't use wifi.

The two issues may be connected, which is why I've included both in this post. So, when I'm playing BO6, several times in a game, I'll be aimed down sights and turning to track my target, and my character will just stop turning until I release the RMB. This happens at all ranges but is worse in CQC. I also get disconnected from the game, occasionally, with the PS error "<LAN cable not connected>". It reconnects within a few seconds. My set-up: M&K > XIM Matrix > Netduma R2 PS5 > Netduma R2 Netduma > Vodafone PowerHub What I've tried Reset and/or rebooted each device seperately and together several times Swapped out each Cat6 LAN cable for new ones, twice Used several different mice and mouse pads Setting up the Netduma as a switch by disabling DHCP on the Netduma, disconnecting the LAN cable from the WAN port on the Netduma and connecting it to Port 1 instead, and assigning a static IP to the XIM and the PS5. This reduced the frequency of the turning-whilst-in-ADS issue and the disconnects, but didn't cure them and, of course, stops the Netduma from accessing the internet, so I can't use the DumOS interface. I'm out of ideas now. Can anyone help?

The error message disappeared after clicking OK, then reappeared a second or two later. I'm on R2 3.3.280. This happened after I'd activated UPnP on my new ISP's router. So I deactivated UPnP but the error persisted. I turned my Netduma off and on and it seems as though that's fixed the issue. Thanks Fraser.

Hi, I get the following error on the Geofilter page: RPC error 'ERROR_UNKNOWN': Unterminated JSON encoded object found at position in [] -> stack traceback: ?: in function <?:73> [C]: in function 'assert' ?: in function 'decode' ?: in function <?:123> ?: in function <?:370> [C]: in function 'xpcall' ?: in function 'try' ?: in function <?:334> [C]: in function 'run' ?: in function <?:427> [C]: in function 'xpcall' ?: in function 'try' ?: in function <?:268> (tail call): ? ?: in function <?:39> [C]: in function 'xpcall' ?: in main chunk [C]: ?