Jump to content

QuillP

Members
  • Content Count

    41
  • Joined

  • Last visited


Reputation Activity

  1. Like
    QuillP reacted to Netduma Fraser in NEW FIRMWARE OUT (Netduma R1): DumaOS Development Milestone 1.3   
    There will be yes but we won't be providing any timelines/deadlines for it
  2. Like
    QuillP reacted to Netduma Fraser in No encuentro algunas opciones en DumaOS   
    Not all of those options are available on DumaOS, please see my comments below:
    Allow remote access to Netduma tech support - This is present in WAN Settings on DumaOS. Enable upnp forwarding - Not included but shouldn't be necessary as most upstream routers you should be able to access. Enable multicast snooping - Not included in DumaOS currently. Enable link-local IPv6 - IPv6 options are available in LAN & WAN Settings on DumaOS. Access control panel from WAN(not recommend) - Not included in DumaOS currently. Enable cookies - Not needed in DumaOS as the web browser cookies will save any options that are saved using cookies. Enable wifi work-around - Not included in DumaOS currently and hopefully should not be needed, was introduced for people experiencing WiFi dropouts. Hopefully that issue is resolved. Stealth Mode - Not included in DumaOS currently. Turbo mode - This is built in automatically so if you have speeds that require it then it will automatically enable itself to allow you to get higher speeds Super Turbo mode (disables CC) - Disabling QoS in Anti-Bufferbloat's option menu will do this. Preemptive/Reactive isn't needed on DumaOS as the QoS has been redesigned.
    Anti-Bufferbloat download/upload sliders are the cap, just the same as on the original firmware.
  3. Like
    QuillP got a reaction from Netduma Fraser in Netflix/Amazon se entrecorta el audio en 5.1   
    Solucionado. No era un problema del modem sino un bug del HDMI ARC del TV LG. Actualice el firmware y ya funciona OK.
    Saludos.
  4. Like
    QuillP reacted to Netduma Fraser in Netflix/Amazon se entrecorta el audio en 5.1   
    Most likely the device is not receiving as much bandwidth as it should be. Either you're throttling with Anti-Bufferbloat too much or you need to allocate bandwidth to the device ideally with share excess off
  5. Like
    QuillP got a reaction from ColonicBoom in About dns   
    Hi, when I select LAN -> DNS -> Automatic DNS, which dns server uses Netduma? Uses the ones assigned by the WAN connection?
  6. Like
    QuillP got a reaction from Alex49H in help to optimize router configuration for straeming, torrent download and web browsing!   
    Gracias! Estoy aprendiendo a usar el router. Muy bueno por ahora, mejoró muchísimo mi conexión a Internet y eso q no lo uso para juegos. Muchas de las funciones q tiene Netduma me permiten tener más control de lo que pasa en mi conexión.
  7. Like
    QuillP reacted to PharmDawgg in I do not understand the traffic graph...   
    Under units on that page change it to Bytes and not Bits.  The values may match up more appropriately.
  8. Like
  9. Like
    QuillP reacted to PharmDawgg in help to optimize router configuration for straeming, torrent download and web browsing!   
    Reactive
    Antiflood @ 100%

     
    Allow auto feedback(no personal data ever) to help improve the R1. -- Unselect or Select Doesn't matter Allow remote access to Netduma tech support. -- Unselect unless you require Netduma to access your router Enable upnp forwarding. Unselect unless your R1 is in a dmz Enable multicast snooping. Unselect unless you have a media server - I leave mine enable because I have a NAS that I stream movies from. Turbo mode. Unselect unless you are needing speeds of around 300Mbps   Yes geofilter only works with games currently. You don't have to select a profile.  There is not a specific one for streaming.  I don't use profiles. You can use them and judge for yourself. The last digits are the host number. For ex. 192.168.88.100 ( 100 is the host number)
  10. Like
    QuillP reacted to PharmDawgg in help to optimize router configuration for straeming, torrent download and web browsing!   
    First I would optimize the setting by these suggestions:
     
    Have you tried out these settings?:
     
     
    - If less than 50mbps, Pre-emptive Algorithm. If more, Reactive Algorithm
    - 100% anti-flood
    - Share excess enabled
    - Reset device prioritisation & apply
    - Disable IPv6 in WAN, LAN & misc (Unless you know that you are on IPv6)
    - Disable deep packet in misc
    - Enable turbo mode if over 120mbps
    - Enable super turbo mode if over 300mbps
    - Ensure the ethernet cables you're using connecting the R1 to hub & R1 to PC are Cat5e+/can handle your speeds.
    - Do a wired speed test from a PC
    Then manage your network congestion by using congestion control on the R1 and www.dslreports.com
  11. Like
    QuillP reacted to Netduma Jack in como configurar netduma   
    Hola, bienvenido al foro!   Conecte el Netduma al concentrador de ISP y conecte todos los dispositivos al Netduma. Asegúrese de que se conectan a través de Configuración de red automática. Asegúrese de que la LAN IP no esté en el mismo rango que el enrutador ISP. (Mantenga el IP de Netduma LAN "88.1")   ____________________________________   Hello, welcome to the forum!   Plug the Netduma into the ISP hub and connect all devices to the Netduma. Make sure they are connecting through Automatic Network Settings.  Make sure the LAN IP is not in the same range as the ISP router. (Keep the Netduma LAN IP "88.1")
  12. Like
    QuillP reacted to titofuenla in como configurar netduma   
    Hola!!
     
    A ver te explico,segun exponex tu router de proveedor tiene rango de ip en dhcp de 192.168.0.1 hasta 192.168.0.255 siendo 192.168.0.1 la puerta de enlace predeterminada, ese router le dara una ip al netduma dentro del rango indicado anteriormente o si desacivas el dhcp le dara la ip que tu le indiques haciendole una reserva de ip o configurando el netduma en el apartado setting/wan manualmente.
     
    Por otro lado esta el rango DHCP del netduma, en su defecto si reinicias de fabrica sera 192.168.88.1 siendo esta la puerta de enlace predeterminada para poder acceder al router, en caso de haberlo actualizado el netduma la puerta de enlace sera 192.168.1.1. 
     
    En principio y si tienes puesto para que tus PCs, consolas y otros dispositivos cojan Ip automaticamente, una vez los conectes a netduma tanto por wifi como por Lan cogeran el rango de ip DHCP de netduma que en este caso empieza en la Ip  192.168.88.100 hasta 192.168.88.255 recordando que la puerta de enlace predeterminada es la 192.168.88.1, en caso de no tener los dipositivos automaticamente y tenerlos manuales, tendras que configurarlos uno a uno poniendo una direccion ip dentro del rango DHCP de netduma.
     
    Tambien comentarte que en el apartado setting/lan puedes modificar tanto la puerta de enlace predeterminada como el rango del DHCP, eso si, recuerda que no le puedes poner el mismo rango DHCP del router predeterminado que en tu caso seria 192.168.0.1, menos ese rango le puedes poner el que quieras, como si quieres que sea 192.168.55.1.
     
    Tambien en el apartado setting/ DHCP lease puedes reservar direcciones IP para cada dispositivo.
     
    Espero haber sido de ayuda y si tienes alguna duda mas o quieres preguntar algo mencioname para que me lo notifique.
     
    Un saludo!
×
×
  • Create New...