rawzi

So I tried the method in that thread you mentioned and it didn't work, right now I cant even login to the R1 . It's the endless loading screen and I rebooted the R1 about 20 minutes ago because the wifi dropped out (again) . I haven't been able to play much but it would seem when this happens my ping goes crazy high 1000ms+ and games are unplayable . Any suggestions would be appreciated !

Sorry for the late response but i have had health issues to deal with . i think at this point everything is working as it should, any lag and studdering i'm going to assume is game related and my shitty internet . bot certain why i had to port forward 3074-75 but it's working . The only issue i'm having is the R1 control panel being extremely slow in loading/working but not to concerned about it atm . Thanks for all the help Fraser, greatly appreciated and again, i'm really digging the router great work !

Open nat on the xbox and so far BO 2-3 open, I am getting some weird lag/studder/pausing now but will put in some game time and see if it's just game issues . I will try the Advnaced DMZ also to see if it cleans things up . I did however have to port forward udp 3074-75 to get them open . Geo-filter is off and ping is back the 60's Speeds on my laptops are still very low on openspeedtest.com but ping is excellent, i have prioritized the xbox in the tree/flower (what ever that is) at 20 and laptops, fires boxes at 16, and phones around 4, would this be why ? I'm going to turn video on the fireboxes and make sure they all work but curious if this is the prioritization Thanks for all the help again, it is greatly appreciated ! love the router

Ok, so everything mentioned I have done but my xbox says "nat not available" (no packet loss though) and my latency has doubled . I know speed tests aren't accurate on xbl but it is about 10mb slower then previous checks (not sure if this is because of prioritization by the R1) . it is wired with a brand new cat6 ethernet, i bought 2 the same and tested both going to the xbox and to the T3200M modem/router . It seems the R1 made 2 UDP port forwards in the T3200M, i'm assuming I leave these ? Should I have this also in the Advanced DMZ, i have not found any useful info as to what difference the 2 are and my ISP is of no help of course . Thanks in advance for any help you can be !

Thanks Netduma Fraser, i'm on it ! I will report back ...

Hi all If these have been answered either the answers i found i was not clear on for my situation or did not find them so i will apologize in advance if they have been answered . I'm connecting the R1 to a T3200M actiontec modem/router with an ethernet cable. After trial and error i finally got access to the R1 dashboard but i was getting ping warnings and dropping my connection (wired and wireless from the xbox one and laptop) . I factory reset the actiontec so all port forwarding and such has been removed, rebooted everything several times. The R1 has a DHCP reserved IP The R1 is in dmz but there is an option for Advanced DMZ and not sure If I need to use this ? Should I have the IPV6 firewall on ? Should Wan Ping block be disabled ? There is an option for IPV6 dmz is this anything i need to mess with ? I have a lot of wifi devices, fire boxes ect.. should i also give them there own static ip ? Any help would be greatly appreciated ! Thank you