Jump to content
Jamess

XR1000 - DumaOS not loaded yet!

Recommended Posts

Hi,

Recently purchased an XR1000 and keep receiving an error 'DumaOS not loaded yet!' when trying to access dumaOS. I briefly can access the dumaOS after completing a factory reset on the router which grants access until the login times out or router restarts. I have tried all the available firmware, none of which provide a resolution.

Any help would be appreciated.

Share this post


Link to post
Share on other sites

Hey, welcome to the forum!

Sorry to hear you're having this issue. Go to the System Information page, in the Rapp panel options, change the retries to 5, then reboot the router from the interface. Wait 2 minutes before connecting devices/accessing the interface, then see if it is better

Share this post


Link to post
Share on other sites
12 minutes ago, Netduma Fraser said:

Hey, welcome to the forum!

Sorry to hear you're having this issue. Go to the System Information page, in the Rapp panel options, change the retries to 5, then reboot the router from the interface. Wait 2 minutes before connecting devices/accessing the interface, then see if it is better

Thanks mate. Where would I find the system info page? Is it under http://routerlogin.net/adv_index.htm or will I have to reset the router to access the dumaos?

Share this post


Link to post
Share on other sites

Have changed the retries to 5 and completed a reboot. I am receiving the same dumaos has not yet loaded error.

Share this post


Link to post
Share on other sites
9 minutes ago, Jamess said:

Have changed the retries to 5 and completed a reboot. I am receiving the same dumaos has not yet loaded error.

Which firmware version are you running currently? 

Is the screen you're seeing just a plain white page with an error in the top left, or is it popping up in the interface?

Share this post


Link to post
Share on other sites
13 hours ago, Netduma Liam said:

Which firmware version are you running currently? 

Is the screen you're seeing just a plain white page with an error in the top left, or is it popping up in the interface?

Hi mate,

Currently running XR1000-V1.0.0.58_1.0.44, have also tried .44, .50 and .52.

I have attached the error screen I am receiving.

DumaOS Not Loaded.png

Share this post


Link to post
Share on other sites
10 hours ago, Jamess said:

Hi mate,

Currently running XR1000-V1.0.0.58_1.0.44, have also tried .44, .50 and .52.

I have attached the error screen I am receiving.

DumaOS Not Loaded.png

Could you please clear your browser cache or open the interface in an incognito window and see if you're still getting the same error? Just seeing if it's the browser caching that page by mistake.

Share this post


Link to post
Share on other sites
On 8/19/2021 at 7:21 PM, Netduma Liam said:

Could you please clear your browser cache or open the interface in an incognito window and see if you're still getting the same error? Just seeing if it's the browser caching that page by mistake.

Tried Chrome, Edge, Firefox and Brave with cleared cache and incognito, all return the same error.

Share this post


Link to post
Share on other sites
19 minutes ago, Jamess said:

Tried Chrome, Edge, Firefox and Brave with cleared cache and incognito, all return the same error.

Are you able to access the interface through the DumaOS app? You'll need to be connected to the XR1000 via Wi-Fi to do this.

Share this post


Link to post
Share on other sites
11 hours ago, Netduma Liam said:

Are you able to access the interface through the DumaOS app? You'll need to be connected to the XR1000 via Wi-Fi to do this.

Receive 'Unknown Error Occured'. I assume the login is the same as the router? That what I used for login.

Share this post


Link to post
Share on other sites

Yes its the same as the interface login. Try unplugging the router from power for 10 minutes, then plug it in and wait 2 minutes before you try to connect or access it and see if it works, if not, then use the TFTP method: https://kb.netgear.com/000059634/How-to-upload-firmware-to-a-NETGEAR-router-using-Windows-TFTP to reinstall the latest firmware, wait for that to finish and see if it works.

Share this post


Link to post
Share on other sites
On 8/21/2021 at 7:40 AM, Netduma Fraser said:

Yes its the same as the interface login. Try unplugging the router from power for 10 minutes, then plug it in and wait 2 minutes before you try to connect or access it and see if it works, if not, then use the TFTP method: https://kb.netgear.com/000059634/How-to-upload-firmware-to-a-NETGEAR-router-using-Windows-TFTP to reinstall the latest firmware, wait for that to finish and see if it works.

So far it appears to be working again. I followed the steps and failed the TFTP method as I didn't have it enabled on my PC. Upon reset of the router the dumaos appears to be working again for the past few days. Thanks all for the help, I'll check back if the error returns.

Share this post


Link to post
Share on other sites
45 minutes ago, Jamess said:

So far it appears to be working again. I followed the steps and failed the TFTP method as I didn't have it enabled on my PC. Upon reset of the router the dumaos appears to be working again for the past few days. Thanks all for the help, I'll check back if the error returns.

If it happens again at the bottom of the guide is a link to help you enable TFTP and then you could try. Keep us posted!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...