Netduma Fraser 11,615 Posted February 23 What settings have you tried before? Really like this it's not being utilized. Are ALL devices connected to the XR or are some connected to the modem/router from the ISP? Share this post Link to post Share on other sites
lezzi 5 Posted February 24 I tried every 5 % step from 20% 20% up to 95%. Also in different combinations (high download, low upload and vice versa). All devices are connected to the XR. I have FTTH, so there is a media converter, from which an ethernet cable goes to the XR and all devices from there. The log in is via PPPOE. Share this post Link to post Share on other sites
Netduma Fraser 11,615 Posted February 24 It could be PPPoE, do you have another router you could use before the XR to handle PPPoE and then see if it works? Share this post Link to post Share on other sites
lezzi 5 Posted February 25 Yes. I can. But would nt that be Double NAT? What settings do I need to use for DMZ? Share this post Link to post Share on other sites
Netduma Liam 284 Posted February 25 1 hour ago, lezzi said: Yes. I can. But would nt that be Double NAT? What settings do I need to use for DMZ? Potentially, just put the XRs WAN IP in the other router's DMZ and that shouldn't be a problem. Share this post Link to post Share on other sites
lezzi 5 Posted February 28 I tried it. It was A LOT! worse. There were actually real lags and stuff, so it wasnt an improovement at all. Share this post Link to post Share on other sites
Netduma Fraser 11,615 Posted February 28 The QoS should apply better now so experiment with the percentages again and you should notice differences. Share this post Link to post Share on other sites
lezzi 5 Posted March 1 on the XR700 with 3.0 beta or the R2? Share this post Link to post Share on other sites
Netduma Liam 284 Posted March 1 35 minutes ago, lezzi said: on the XR700 with 3.0 beta or the R2? On the XR700 please! Share this post Link to post Share on other sites
lezzi 5 Posted March 5 to give you an update here: it is working better with fritzbox doing the pppoe and xr700 behind hit. however ONLY on the old versions. the beta 3.0 is performing a lot worse and not doing any traffic prioritization correct. So atm I am at 1.0.38 with congestion control off as any percentages between 60 and 100 % are performing worse than CCC on never. Share this post Link to post Share on other sites
Netduma Fraser 11,615 Posted March 5 5 hours ago, lezzi said: to give you an update here: it is working better with fritzbox doing the pppoe and xr700 behind hit. however ONLY on the old versions. the beta 3.0 is performing a lot worse and not doing any traffic prioritization correct. So atm I am at 1.0.38 with congestion control off as any percentages between 60 and 100 % are performing worse than CCC on never. Thanks for the update - can you expand on TP not doing it correctly and how are you determining CC is worse on those percentages? Share this post Link to post Share on other sites
