InternetGuru11 0 Posted December 12, 2020 How do I properly setup traffic prioritization on the XR1000 for CW PC? I dont want to use the " games console " service. Share this post Link to post Share on other sites
Netduma Fraser 11,256 Posted December 13, 2020 Hey, welcome to the forum! Any reason you don't want to use the Games Console service? You can add manual ports to prioritize for the game as you see here: https://portforward.com/call-of-duty-black-ops-cold-war/ Share this post Link to post Share on other sites
InternetGuru11 0 Posted December 13, 2020 How should it be setup? I have one port setup and it seems to work but i wanted to know if it's correct and if there's others i can setup and wanted to know the correct way to do them. (P.S. I found this port in these forums and it ended up working) Share this post Link to post Share on other sites
Netduma Fraser 11,256 Posted December 13, 2020 If that's what works for you then that is absolutely fine, it does use may ports than that but maybe not always during a match. Share this post Link to post Share on other sites
InternetGuru11 0 Posted December 13, 2020 Which ports are used during gameplay? Share this post Link to post Share on other sites
Netduma Fraser 11,256 Posted December 13, 2020 3074 most predominantly, they will all be used at some point so it would be good to make those extra rules just in case. Share this post Link to post Share on other sites
InternetGuru11 0 Posted December 14, 2020 can you tell me how would i setup the other ports and use an example please Share this post Link to post Share on other sites
Netduma Liam 196 Posted December 14, 2020 7 hours ago, InternetGuru11 said: can you tell me how would i setup the other ports and use an example please You can add port forwarding rules in Network Settings -> Port forwarding Share this post Link to post Share on other sites
InternetGuru11 0 Posted December 15, 2020 I know how to port forward I want to know how to setup these ports to prioritize in-game packets Share this post Link to post Share on other sites
Netduma Fraser 11,256 Posted December 15, 2020 No need to port forward, an example would be Source 1-65535 Destination 3074 Protocol TCP/UDP Share this post Link to post Share on other sites
shiddy 4 Posted December 16, 2020 22 hours ago, Netduma Fraser said: No need to port forward, an example would be Source 1-65535 Destination 3074 Protocol TCP/UDP Is it not vice versa? Source 3074 3074 (TCP/)UDP - Destination 30000-65535 (TCP/)UDP !? If not plz explain Share this post Link to post Share on other sites
Netduma Fraser 11,256 Posted December 16, 2020 25 minutes ago, shiddy said: Is it not vice versa? Source 3074 3074 (TCP/)UDP - Destination 30000-65535 (TCP/)UDP !? You don't always know what the source port will be which is why we advise that but yes people try it that way as well. Share this post Link to post Share on other sites
satinghostrider 1 Posted December 17, 2020 9 hours ago, Netduma Fraser said: You don't always know what the source port will be which is why we advise that but yes people try it that way as well. Hey Fraser, Thanks for your impecable support. I too am having issues with connections on PC with COD CW servers but it seems it is largely due to the new update. Just want to clarify : 1) Do you need to set the source port if you have your PC IP on DMZ? My UPNP is On and COD CW shows NAT as OPEN. Also, under QOS, Traffic Prioritization is set to DUMA Classified games as enabled on all devices with no other manually created rules. 2) Does adding my PC under Geo-Filter Devices under specatating mode do anything for improving gameplay or finding games on my PC against other gamers on PC, Xbox and PS? Just curious as I want to find the best way to setup my XR500 under 2.3.2.66 Firmware for Coldwar and I have not really been able to find much. Thanks in Advance mate! Share this post Link to post Share on other sites
Netduma Liam 196 Posted December 17, 2020 If you're getting an open NAT, it's probably best to stick with what's working for you! However, I wouldn't advise DMZing your PC, instead put the WAN IP of the XR500 in the DMZ. There has been a lot of issues with the new CoD update but some users have reported this being fixed now so keep an eye on it and report back if you're still having issues. Spectator mode is essentially like having Geo-filter off, switch it to filtering mode to get the benefits of Geo-filter! Share this post Link to post Share on other sites
satinghostrider 1 Posted December 18, 2020 20 hours ago, Netduma Liam said: If you're getting an open NAT, it's probably best to stick with what's working for you! However, I wouldn't advise DMZing your PC, instead put the WAN IP of the XR500 in the DMZ. There has been a lot of issues with the new CoD update but some users have reported this being fixed now so keep an eye on it and report back if you're still having issues. Spectator mode is essentially like having Geo-filter off, switch it to filtering mode to get the benefits of Geo-filter! Thank you Liam! Just one last thing. If you enabled Geofilter for PC under spectating mode and added profile Call of Duty (PC), it does nothing at all to improve game searches and servers even? Share this post Link to post Share on other sites
Netduma Liam 196 Posted December 18, 2020 4 hours ago, satinghostrider said: Thank you Liam! Just one last thing. If you enabled Geofilter for PC under spectating mode and added profile Call of Duty (PC), it does nothing at all to improve game searches and servers even? No problem at all, yes that's the intention of Spectator mode, filtering mode will enable Geo-filter Share this post Link to post Share on other sites
Asjb123 4 Posted December 21, 2020 Ports Required for Call of Duty: Warzone Pc TCP: 3074,27014-27050. UDP: 3074,3478,4379-4380,27000-27031,27036. so wouldn’t you also prioritize source port 3074 3478 and 4379-4380 then destinations 20000-50000 ? Share this post Link to post Share on other sites
Netduma Liam 196 Posted December 21, 2020 3 hours ago, Asjb123 said: Ports Required for Call of Duty: Warzone Pc TCP: 3074,27014-27050. UDP: 3074,3478,4379-4380,27000-27031,27036. so wouldn’t you also prioritize source port 3074 3478 and 4379-4380 then destinations 20000-50000 ? From what we've seen 3074 seems to be the key one, but if you're still experiencing some issues you could try the other ports you've mentioned there and see if it yields any results for you. Share this post Link to post Share on other sites
Asjb123 4 Posted December 21, 2020 47 minutes ago, Netduma Liam said: From what we've seen 3074 seems to be the key one, but if you're still experiencing some issues you could try the other ports you've mentioned there and see if it yields any results for you. Well I’m assuming the orange are destination and black are source ports ? Share this post Link to post Share on other sites
Netduma Fraser 11,256 Posted December 21, 2020 2 hours ago, Asjb123 said: Well I’m assuming the orange are destination and black are source ports ? Not necessarily no, the source ports could be anything but try it like that and see what the experience is like. Share this post Link to post Share on other sites
Asjb123 4 Posted December 21, 2020 Yeah running beta on Xr700 I did have different ports entered and prioritization was triggering now Qos won’t even trigger and this was after factory reset then fresh install of beta firmware. Share this post Link to post Share on other sites
Netduma Fraser 11,256 Posted December 21, 2020 27 minutes ago, Asjb123 said: Yeah running beta on Xr700 I did have different ports entered and prioritization was triggering now Qos won’t even trigger and this was after factory reset then fresh install of beta firmware. Is it triggerring using DumaOS Classified Games or with the Games console service? Share this post Link to post Share on other sites
Asjb123 4 Posted December 21, 2020 It was not triggering at all then randomly just starts working. and you can definitely tell the difference Share this post Link to post Share on other sites
Netduma Fraser 11,256 Posted December 21, 2020 If you added the manual rule while the console was on then that could explain the on/off behavior. If it happens again make sure to enable it while the console is completely off and then turn it on. Share this post Link to post Share on other sites
Asjb123 4 Posted December 21, 2020 It’s on pc.. I did try that but they just randomly started working after I left it there for about 10-15mins Share this post Link to post Share on other sites