Jump to content

Recommended Posts

Hi all,

Received the XR300 today.  Apart from a few 'Nil' bugs, so far, so good.  Only real disappointment so far is VPN.  Does anyone know if the XR300 will get the Hybrid VPN?  I am really hoping so, as I am trying to simplify my network and I thought it would have it. 

Thanks

 

Share this post


Link to post
Share on other sites

Unfortunately the XR300 doesn't support hybrid VPN. It might do at some point in the future, but we don't have any immediate plans to add it. Sorry!

Share this post


Link to post
Share on other sites
22 hours ago, Netduma Alex said:

Unfortunately the XR300 doesn't support hybrid VPN. It might do at some point in the future, but we don't have any immediate plans to add it. Sorry!

I have to ask why? Its got a 1Ghz Broadcom BCM4708C0 SoC and 128Mb flash memory and 512Mb of RAM, thats more than the R1 all round,. So why s it not getting the Hybrid VPN?

Share this post


Link to post
Share on other sites

I was wondering the same, I have an R7000 with lower RAM which with custom firmware is able to run VPN in a similar fashion to Hybrid VPN.  Obviously the DumaOs version is more customisable and simple though, which is why I was disappointed.

I have to say I'm having a right mare trying to get my VPN working how I want on either the R1 and now the XR300 too 😢

Share this post


Link to post
Share on other sites
9 hours ago, Killhippie said:

I have to ask why? Its got a 1Ghz Broadcom BCM4708C0 SoC and 128Mb flash memory and 512Mb of RAM, thats more than the R1 all round,. So why s it not getting the Hybrid VPN?

Feature decisions are down to Netgear.

9 hours ago, Gamingcavalier said:

I was wondering the same, I have an R7000 with lower RAM which with custom firmware is able to run VPN in a similar fashion to Hybrid VPN.  Obviously the DumaOs version is more customisable and simple though, which is why I was disappointed.

I have to say I'm having a right mare trying to get my VPN working how I want on either the R1 and now the XR300 too 😢

What's the issue you're having when trying to get it working on the R1?

Share this post


Link to post
Share on other sites
1 hour ago, Netduma Fraser said:

Feature decisions are down to Netgear.

What's the issue you're having when trying to get it working on the R1?

Did the XR500 not get an update for Hybrid after too?  Not sure if you can remember, we tried on the old firmware, couldn't get it to work.  Now on DumaOS it doesn't work either.  I'm not sure but it seems the R1 doesn't support VPN client or something along those lines.

Share this post


Link to post
Share on other sites
14 minutes ago, Gamingcavalier said:

Did the XR500 not get an update for Hybrid after too?  Not sure if you can remember, we tried on the old firmware, couldn't get it to work.  Now on DumaOS it doesn't work either.  I'm not sure but it seems the R1 doesn't support VPN client or something along those lines.

Both the routers have access to the Hybrid VPN feature and you can use the basic settings for HMA or PureVPN or the advanced section for any other provider assuming you can get the OpenVPN config from the provider.

Share this post


Link to post
Share on other sites

Yeah, I've tried the OpenVPN configuration files for different VPN providers but they all ended in errors.  I tried the same files on a custom Netgear R7000 and it worked fine, so seems the R1 is missing something and obviously the XR300 has no Hybrid so I'm stuck really.

Share this post


Link to post
Share on other sites
4 hours ago, Netduma Fraser said:

Feature decisions are down to Netgear.

DumaOS fragmentation is now down to Netgear. Not something I expected to see. 

Share this post


Link to post
Share on other sites

We're always looking to put all of the features we can on all of the hardware we can, but essentially if a feature is a "must have" for your setup, you need to make sure it's a listed feature for the specific hardware you're buying. Anything added later could be considered a bonus.

Share this post


Link to post
Share on other sites
17 hours ago, Netduma Fraser said:

Could you paste one of the configs you're trying to use here as it might need some editing to work

Here's the configuration file

client
dev tun
proto udp
remote uk.windscribe.com 443

nobind
auth-user-pass

resolv-retry infinite

auth SHA512
cipher AES-256-CBC
comp-lzo
verb 2
mute-replay-warnings
remote-cert-tls server
persist-key
persist-tun

key-direction 1
<ca>
-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
</ca>
<tls-auth>
-----BEGIN OpenVPN Static key V1-----
5801926a57ac2ce27e3dfd1dd6ef8204
2d82bd4f3f0021296f57734f6f1ea714
a6623845541c4b0c3dea0a050fe6746c
b66dfab14cda27e5ae09d7c155aa554f
399fa4a863f0e8c1af787e5c602a801d
3a2ec41e395a978d56729457fe6102d7
d9e9119aa83643210b33c678f9d4109e
3154ac9c759e490cb309b319cf708cae
83ddadc3060a7a26564d1a24411cd552
fe6620ea16b755697a4fc5e6e9d0cfc0
c5c4a1874685429046a424c026db672e
4c2c492898052ba59128d46200b40f88
0027a8b6610a4d559bdc9346d33a0a6b
08e75c7fd43192b162bfd0aef0c716b3
1584827693f676f9a5047123466f0654
eade34972586b31c6ce7e395f4b478cb
-----END OpenVPN Static key V1-----
</tls-auth>

Share this post


Link to post
Share on other sites
1 hour ago, Netduma Fraser said:

Ahh I remember your topic now, it was this one wasn't it? https://forum.netduma.com/topic/28148-windscribe-config-file-for-vpn/ In which case probably isn't the config, I'll chase the devs on the issue you've been having.

That's the one.  I thought getting the XR300 would sort that but seems not 😭

Share this post


Link to post
Share on other sites

Hey everyone! 

Just got my XR300 and noticed you mentioned the “Nil” bugs. I’m confident I’m having the same issues with the geo filtering and auto ping. Everything related to those is attached with “nil”! Auto ping doesn’t show a live feed measured in “MS” but nil instead! Every box says nil. When I click on the menu next to geo filter map, under flush cloud, another selection labeled nil with selections, 2.5 being the first, then 5,8,10, and 15. Under that, another selection but labeled nil with an adjustable slider, lastly under that just a box labeled nil. I have no idea what any of this means but I’m confident this isn’t normal! Can someone please clarify all this for me? And why my ping isn’t measure by milliseconds? Thank you all in advance! 112FEEEE-48B5-4C31-B566-93B5E247CF90.thumb.jpeg.b15d8120f853ac254204a7ec8a94aa28.jpeg6D0E61BD-E9E5-4CCD-BE69-C4058FA2D1E4.thumb.jpeg.9f4a30e13e58786241846e90a67cb68b.jpegED94C38F-4018-428D-BA53-587F0439D1C8.thumb.jpeg.170111efc25a9728e060250d9c9d0989.jpegCCE4C616-12B6-49BC-B76D-4DFAB4040662.thumb.jpeg.c0ffeb0de8bb420770d57058d4c6cf82.jpeg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...