HaBlo0 Posted December 6, 2018 Share Posted December 6, 2018 Bonjour, J'ai remarqué qu'en faisant des tests de débits sur des sites comme speedtest ou dslreports, les débits que j'étais sensé avoir (celui qui est indiqué dans QOS, à droite des barres de congestion) n'étaient pas les même. De base, j'ai mis 510 en download et 280 en upload. Comme recommandé par les admins, je mets les barres à 70 %, et donc je devrais avoir 357 en down et 196 en up. Seulement, quand je fais mes tests, je n'obtiens pas du tout ça.. ça me donne 249 en download, et 269 en upload. J'ai fait le test plusieurs fois, pour le même résultat (j'ai aussi vidé le cache de google chrome au cas où). Est ce qu'il y'a un réglage particulier à faire pour avoir les valeurs les plus proches possibles que celles que je devrais avoir ? par exemple, décocher goodput, mettre never pour l'anti-bufferbloat ? Merci à vous Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted December 6, 2018 Administrators Share Posted December 6, 2018 Have you changed anything under Bandwidth Allocation and disabled share excess? Link to comment Share on other sites More sharing options...
HaBlo0 Posted December 6, 2018 Author Share Posted December 6, 2018 No no i kept share excess ticked and lay 50/50 Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted December 6, 2018 Administrators Share Posted December 6, 2018 Is this a wired speed test or wireless? Also which router are you using? Link to comment Share on other sites More sharing options...
HaBlo0 Posted December 6, 2018 Author Share Posted December 6, 2018 It's wired ; i use shielded cable cat7 too (as i have optic fiber). I have the r1, i did updates from 1.06j to milestone Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted December 6, 2018 Administrators Share Posted December 6, 2018 If you disable QoS completely in Anti-Bufferbloat options do you get the full speeds 510/280? Link to comment Share on other sites More sharing options...
HaBlo0 Posted December 7, 2018 Author Share Posted December 7, 2018 Effectively, I did test today and now I get my real speed and debit are almost the same when I use congestion, except for the upload, I get 20megas more I should have but it's nothing ; yesterday i did test on dslreports and yesterday on speedtest, i think speedtest is more precise I noticed another thing : yesterday, i did a factory reset ; on Lan, network settings, i fix my ps4 adress on dhcp and disabled upnp. After that, i boot BO4 and a "port" (don't know what's the english for this ^^) appears on upnp. This morning, i removed ps4 on dhcp and when i start bo4, nothing appears on upnp. Is it a bug or is it normal ? Thank you for the speed of your answers ! Link to comment Share on other sites More sharing options...
Netduma Staff Netduma Jack Posted December 7, 2018 Netduma Staff Share Posted December 7, 2018 3 hours ago, HaBlo0 said: Effectively, I did test today and now I get my real speed and debit are almost the same when I use congestion, except for the upload, I get 20megas more I should have but it's nothing ; yesterday i did test on dslreports and yesterday on speedtest, i think speedtest is more precise I noticed another thing : yesterday, i did a factory reset ; on Lan, network settings, i fix my ps4 adress on dhcp and disabled upnp. After that, i boot BO4 and a "port" (don't know what's the english for this ^^) appears on upnp. This morning, i removed ps4 on dhcp and when i start bo4, nothing appears on upnp. Is it a bug or is it normal ? Thank you for the speed of your answers ! Thanks for letting us know. Just to make sure then, is your speed issue sorted? Depending on your ISP and the time of day, your speed can vary. I sounds to me like it's fine now though UPnP is being worked on as sometimes the UPnP table doesn't show ports in the right way. You should still have an Open NAT though, which is what you are aiming for with UPnP anyway. I hope this makes sense - your English was correct, 'port' is the best word to use there Link to comment Share on other sites More sharing options...
HaBlo0 Posted December 7, 2018 Author Share Posted December 7, 2018 Ok Jack For upnp, as i am using port forwarding to get an open nat (80 tcp 443 tcp 1024-65535 tcp udp), i felt in game so slow-down and bullets don't touch as they had to do when ports appeared on upnp tab, i think this do double opening and i saw on a topic that this can cause trouble in game. I will try this evening to see if it always works better for me. Thnk you ! Netduma Admin and Netduma Fraser 2 Link to comment Share on other sites More sharing options...
Recommended Posts