Jump to content
kinel

Please read this everyone now for cod mw2019

Network monitor feature  

133 members have voted

  1. 1. Would you like to see it reinstalled in future updates

    • Yes i would
      126
    • No thanks
      7


Recommended Posts

2 hours ago, Kostas83 said:

Hi guys!!

The last 2 days I had the worst experience with hit detection... I had the following settings:

ABB off

QoS enable

traffic priorization with this ports 

3074:3075 - 3100:3500

3100:3500 - 3074:3075

3074:3075 - 30000:45000

30000:45000 - 3074:3075

Yesterday twice it happen to shoot on an enemy at least 5-6 bullets and non of one bullet give hit detection. From the kill cam the game shows that never shoot him!!

i decide to reset the router and set it up as normal... ABB on 70% QoS enable and activate the Duma classified games ON. I play and my game experience is very good but not perfect... Now I am little be confused 🥴🥴 what I should do... I did something wrong with my first setup?? I tied to manage the Wireshark to find the ports with no success... I play on PS4 and i leave in Europe. 

Those settings to me look good byt i would delete the first two rules 3100  3500  as i dont thin there  needed

Share this post


Link to post
Share on other sites
2 hours ago, kinel said:

Those settings to me look good byt i would delete the first two rules 3100  3500  as i dont thin there  needed

Hi Kinel

i will give a try with your suggestion. I will do a reset to the router and I will set it with the second couple of rules. Thank you!

Share this post


Link to post
Share on other sites
13 hours ago, Netduma Fraser said:

The bandwidth that is used by the game even with stats etc is not very much at all so I doubt it would really affect the state of the game to prioritize them or not. There is no problem putting in a range of ports either as if there are ports not being used they simply won't be prioritized. I get that putting in individual rules is working and I'm really pleased to hear that and I have asked directly if being able to see port usage will be implemented in 3.0 so when I get an answer I will let you guys know.

Please Fraser by all means let us know once you get an answer. This really would be nice to see!

Zippy.

Share this post


Link to post
Share on other sites

All you need to do is  put these ports into taffic proirtization

Rule1  source start  3074   3075       end destination  30000 45000 udp

Rule 2  start  source  30000 45000   end destination    3074 3075   udp

These ports  you put in will make you hit detection briliant

Thats The simplest way to explain it

 This guide was made a long time ago for bo4 

Thats why its confusing sorry 

But you could  use the ports i posted here  instesd of the old ones

But throughout this thread users here gave some great helpful advice  and shown details on how to do it as well

East on these forum has a better guide than mine its brilliant i think if you do read it read through it  all  theres lots of good help from users in it 

A user on his guide shows a tactical nuke from using easts guide

This thread was never meant as a guide    

Share this post


Link to post
Share on other sites
14 hours ago, OverTheReminds said:

I would like to try it out but the guide is rushed and confusionary, would you mind explaining it slower step by step?

 Read post above this one its for you i forgot to tag you in it sorry

Share this post


Link to post
Share on other sites
8 hours ago, kinel said:

 Read post above this one its for you i forgot to tag you in it sorry

Thanks, however my problem is that I don't know how to put the ports in the traffic priorization

EDIT: Never mind, solved, I'll give it a try later, thanks in advance ;)

Share this post


Link to post
Share on other sites

I was wondering does using the game profiles on the geo filter help in call of duty? Besides the open nat and udp settings? 

Share this post


Link to post
Share on other sites
On 12/21/2019 at 2:37 PM, Doughboy said:

I was wondering does using the game profiles on the geo filter help in call of duty? Besides the open nat and udp settings? 

Those Geo-Filter profiles just give you the recommended distance / Ping Assist / Strict Mode setting for that game. We've plans to improve profiles in the future for the Geo-Filter :)

Share this post


Link to post
Share on other sites
On 10/31/2018 at 2:31 PM, kinel said:

I HAVE UPDATED IT FOR COD MW READ JUST BELOW HOPE ITS NOT TO CONFUSING BUT THIS TOPIC WAS STARTED A LONG TIME AGO

It also now shows you how to traffic protize cod mw ports 2019 below

 

 I WILL POST  COD MW PORTS  jUST  BELOW HERE these are the ones i found so far i will keep updating it with new ones here

 

I recently upgraded to new dumar os fw and think its great but its missing one thing important i think

 

In network monitor it now does not show you what ports the game you play is connected to uses

In cod bo4   now cod mw 20019   i used this feature all the time 

In cod bo4 same for cod mw19 everytime you would join a new lobby  it would show us new ports it was connected to.

You would always be connected to two  ports in every game this first port is always port 3074 udp the second was always diffrent ever new lobby you join uses diffrent ports

If you stayed in the same lobby for an hour the two ports would be the same for an hour or how long you stayed in that lobby . Once you change lobbys  the game changes ports it uses so you need to put new ports in traffic  priortaztion

I think this is why the connection keeps varying 

 

For cod  mw 2019  its now three ports instead of two

 

HERES  WHY ITS IMPORTANT

when i put in the ports it uses for that game in traffic priortization my hit registration would get a lot lot better  i did this before on cod ww2 now i do it for cod mw2019 and it helped my hit registration  .And on cod bo4 

Somtimes i would do this during a game.    i would be playing a game and struggling to get a kill then in same lobby same people playing i would enter those port number in and the hit registration was great easier kills same for cod mw2019

EVEN  IF YOUR NOT PLAYING COD you still might need it for other games.

 i used it for all my other games to help get a better connection  and i would like to use it in the future for new games

I really dont wanna downgrade to an older fw just to use this feature as it was so GREAT

SO ANY GAME YOU WANNA SEE  WHAT  PORTS IT USES YOU NEED THIS 

As some games it dosent  tell you all the ports it uses

I would love to use this for red dead redemption 2 online when its released soon

Fraser told me if enough peole want this feture back in the firmware they would put it back in

SO I JUST PUT A POLL UP    SO PLEASE VOTE   THANKY YOU  

So i am asking any who  might use it before or might wanna use it in the future please vote on the poll here if you would like to see it in i future update

I hope i made sence sorry for any typos

And please post to say you would like it the more people who say they want it they saidthey would reinstall it if the demands there

Thanks 

 i have now edited to update for cod mw

READ FROM HERE for cod mw 2019 and how to set up ports correctly 

From members who know how to set it up correctly  below

RL317  shows how to in this post below 

He knows more about it than i do ahe advised me how to set it up correctly

 

Just letting you guys know i think now playing cod mw that the next update that the dumar has has to reinstall the older network monitor 

My hit detection \hit registration  is now brilliant since i done these steps

Heres why

If you want your hit registration or hit detection  to be great read this

When playing cod mw  the game uses 3 ports to play thats if you want godd hit detection  \hit registration 

The first is port 3074 this is on ps4 i think its 3075 on xbox but i am not sure i dont know about pc

The second port stays the same untill you restart the game i think this is the data centre or either matchmaking

The 3rd port is  changes every new game  this is the dedi or peer your playing on

Thats why you see new people every game  and thats why you do good one game but not the next

Thats because you changed dedis  and the ports have changed

 

 So thats why you need 3 ports every game  the first is 3074  the send is the matchmaking or data centre the 3rd is for the game mode you play

Atm i am making a list for  the ports it uses

Just letting you know  you can do this yourself to see what ports is needed  but you have to downgrade to the older firmware  well thats on netdumar1

I dont know about other routers  

Also this cane be done if you have a router with openwrt on it

You would have to ask admins   as i dont know anything about the other routers

 

Heres a way to put the ports in traffic priortization

Source  3074-3075 destination  30000-45000 udp  rule 1

Source 30000-45000  destination 3074-3075 udp   rule 2

Source  3074-3075  destination 3100-3500 udp    rule 3 not nessasery optional 

Source  3100-3500  destination 3074-3075 udp    rule 4 not nessssery optional

 

HERES A LOAD OF PORTS TH GAMES COD MW USES

Heres is a copy of my upnp settings screen after playing a losd of cod mw 2019

192.168.88.119     9308     9308     192.168.88.119     UDP
DemonwarePortMapping     3074     3074     192.168.88.119     UDP
DemonwarePortMapping     3163     3074     192.168.88.55     UDP
DemonwarePortMapping     3153     3074     192.168.88.55     UDP
DemonwarePortMapping     3172     3074     192.168.88.55     UDP
DemonwarePortMapping     3184     3074     192.168.88.55     UDP
DemonwarePortMapping     3155     3074     192.168.88.55     UDP
DemonwarePortMapping     3123     3074     192.168.88.55     UDP
DemonwarePortMapping     3102     3074     192.168.88.55     UDP
DemonwarePortMapping     3148     3074     192.168.88.55     UDP
DemonwarePortMapping     3111     3074     192.168.88.55     UDP
DemonwarePortMapping     3124     3074     192.168.88.55     UDP
DemonwarePortMapping     3131     3074     192.168.88.55     UDP
DemonwarePortMapping     3150     3074     192.168.88.55     UDP
DemonwarePortMapping     3192     3074     192.168.88.55     UDP
DemonwarePortMapping     3176     3074     192.168.88.55     UDP
DemonwarePortMapping     3125     3074     192.168.88.55     UDP
DemonwarePortMapping     3129     3074     192.168.88.55     UDP
DemonwarePortMapping     3177     3074     192.168.88.55     UDP
DemonwarePortMapping     3115     3074     192.168.88.55     UDP
DemonwarePortMapping     3162     3074     192.168.88.55     UDP
DemonwarePortMapping     3116     3074     192.168.88.55     UDP
DemonwarePortMapping     3147     3074     192.168.88.55     UDP
DemonwarePortMapping     3134     3074     192.168.88.55     UDP
DemonwarePortMapping     3133     3074     192.168.88.55     UDP
DemonwarePortMapping     3100     3074     192.168.88.55     UDP
DemonwarePortMapping     3109     3074     192.168.88.55     UDP
DemonwarePortMapping     3095     3074     192.168.88.55     UDP
DemonwarePortMapping     3127     3074     192.168.88.55     UDP
DemonwarePortMapping     3190     3074     192.168.88.55     UDP
DemonwarePortMapping     3117     3074     192.168.88.55     UDP
DemonwarePortMapping     3126     3074     192.168.88.55     UDP
DemonwarePortMapping     3084     3074     192.168.88.55     UDP
DemonwarePortMapping     3182     3074     192.168.88.55     UDP
DemonwarePortMapping     3138     3074     192.168.88.55     UDP
DemonwarePortMapping     3175     3074     192.168.88.55     UDP
DemonwarePortMapping     3171     3074     192.168.88.55     UDP
DemonwarePortMapping     3165     3074     192.168.88.55     UDP
DemonwarePortMapping     3180     3074     192.168.88.55     UDP
DemonwarePortMapping     3169     3074     192.168.88.55     UDP
DemonwarePortMapping     3085     3074     192.168.88.55     UDP
DemonwarePortMapping     3105     3074     192.168.88.55     UDPDemonwarePortMapping     3194     3074     192.168.88.55     UDP
DemonwarePortMapping     3074     3074     192.168.88.55     UDP
192.168.88.55     9308     9308     192.168.88.55     UDP

Btw i noticed everytime i reset cod mw 2019  these more was added they were added one at a time

So i thought these ports are needed as well but now i think there optsinal

Here are the ports network monitor  shows are in use for cod mw 2019  i will add more when i find them

30410  35710  30350   31300  35300  37160  31350  36360  32700  32710 39860  38280
39500  42420  43300  30040  30080 32560   31080  32540  30110   30020   30030   30070
30230  30500  30600  31030  32930  33640  34260  36050   36290  36930 39550  43610  43840  44790
30020   :30010   :32680   32310   :32350  :30190    :34790 :34790    :30070     30100     32560   :32580  30060  33420
33420    40820  36800  32310   30550 30520 30130 30060  35310  32550   30040  30310    30160  32590   39300   32460   32490   32550  35800   3258032570

These  ports  made into a range by   east   so thank you to them

They have a brilliant guide on these forums i recken you guys read it

I think its the best one

 

 

 

 

 Please if you found this helpful  please vote

this thread was started over a year ago and we are still have no clue if there gonna bring it back

SORRY IF  I DOUBLE POSTED A FEW PORTS TWICE BUT I HAVENT HAD TIME TO EDIT THIE LIST YET

 

BTW ANY PORTS LISTED BELOW HERE ARE FOR OLDER COD

But you can still see how the people use traffick  prortization correctly  you just input your ports instead of the outdated ones 

Hi, I put like me to the first post and voted your poll hoping to see that option also on xr450/500/700.
I wanted to ask you please if you can help me read the traffic via wireshark. I start the program, but I can't find either the ps4 ip address (I find it but not for traffic) or the 3074 udp port. Should I give some rules before starting it?
If you could help me out, I'd really appreciate it.

Share this post


Link to post
Share on other sites

Daniele sorry i cant help you  as i have never used wireshark   theres many members here  who have like ghost east

Post in there thread  and they may help you sorry

Btw thank you for voting

Share this post


Link to post
Share on other sites
On 10/31/2018 at 9:31 AM, kinel said:

I HAVE UPDATED IT FOR COD MW READ JUST BELOW HOPE ITS NOT TO CONFUSING BUT THIS TOPIC WAS STARTED A LONG TIME AGO

It also now shows you how to traffic protize cod mw ports 2019 below

 

 I WILL POST  COD MW PORTS  jUST  BELOW HERE these are the ones i found so far i will keep updating it with new ones here

 

I recently upgraded to new dumar os fw and think its great but its missing one thing important i think

 

In network monitor it now does not show you what ports the game you play is connected to uses

In cod bo4   now cod mw 20019   i used this feature all the time 

In cod bo4 same for cod mw19 everytime you would join a new lobby  it would show us new ports it was connected to.

You would always be connected to two  ports in every game this first port is always port 3074 udp the second was always diffrent ever new lobby you join uses diffrent ports

If you stayed in the same lobby for an hour the two ports would be the same for an hour or how long you stayed in that lobby . Once you change lobbys  the game changes ports it uses so you need to put new ports in traffic  priortaztion

I think this is why the connection keeps varying 

 

For cod  mw 2019  its now three ports instead of two

 

HERES  WHY ITS IMPORTANT

when i put in the ports it uses for that game in traffic priortization my hit registration would get a lot lot better  i did this before on cod ww2 now i do it for cod mw2019 and it helped my hit registration  .And on cod bo4 

Somtimes i would do this during a game.    i would be playing a game and struggling to get a kill then in same lobby same people playing i would enter those port number in and the hit registration was great easier kills same for cod mw2019

EVEN  IF YOUR NOT PLAYING COD you still might need it for other games.

 i used it for all my other games to help get a better connection  and i would like to use it in the future for new games

I really dont wanna downgrade to an older fw just to use this feature as it was so GREAT

SO ANY GAME YOU WANNA SEE  WHAT  PORTS IT USES YOU NEED THIS 

As some games it dosent  tell you all the ports it uses

I would love to use this for red dead redemption 2 online when its released soon

Fraser told me if enough peole want this feture back in the firmware they would put it back in

SO I JUST PUT A POLL UP    SO PLEASE VOTE   THANKY YOU  

So i am asking any who  might use it before or might wanna use it in the future please vote on the poll here if you would like to see it in i future update

I hope i made sence sorry for any typos

And please post to say you would like it the more people who say they want it they saidthey would reinstall it if the demands there

Thanks 

 i have now edited to update for cod mw

READ FROM HERE for cod mw 2019 and how to set up ports correctly 

From members who know how to set it up correctly  below

RL317  shows how to in this post below 

He knows more about it than i do ahe advised me how to set it up correctly

 

Just letting you guys know i think now playing cod mw that the next update that the dumar has has to reinstall the older network monitor 

My hit detection \hit registration  is now brilliant since i done these steps

Heres why

If you want your hit registration or hit detection  to be great read this

When playing cod mw  the game uses 3 ports to play thats if you want godd hit detection  \hit registration 

The first is port 3074 this is on ps4 i think its 3075 on xbox but i am not sure i dont know about pc

The second port stays the same untill you restart the game i think this is the data centre or either matchmaking

The 3rd port is  changes every new game  this is the dedi or peer your playing on

Thats why you see new people every game  and thats why you do good one game but not the next

Thats because you changed dedis  and the ports have changed

 

 So thats why you need 3 ports every game  the first is 3074  the send is the matchmaking or data centre the 3rd is for the game mode you play

Atm i am making a list for  the ports it uses

Just letting you know  you can do this yourself to see what ports is needed  but you have to downgrade to the older firmware  well thats on netdumar1

I dont know about other routers  

Also this cane be done if you have a router with openwrt on it

You would have to ask admins   as i dont know anything about the other routers

 

Heres a way to put the ports in traffic priortization

Source  3074-3075 destination  30000-45000 udp  rule 1

Source 30000-45000  destination 3074-3075 udp   rule 2

Source  3074-3075  destination 3100-3500 udp    rule 3 not nessasery optional 

Source  3100-3500  destination 3074-3075 udp    rule 4 not nessssery optional

 

HERES A LOAD OF PORTS TH GAMES COD MW USES

Heres is a copy of my upnp settings screen after playing a losd of cod mw 2019

192.168.88.119     9308     9308     192.168.88.119     UDP
DemonwarePortMapping     3074     3074     192.168.88.119     UDP
DemonwarePortMapping     3163     3074     192.168.88.55     UDP
DemonwarePortMapping     3153     3074     192.168.88.55     UDP
DemonwarePortMapping     3172     3074     192.168.88.55     UDP
DemonwarePortMapping     3184     3074     192.168.88.55     UDP
DemonwarePortMapping     3155     3074     192.168.88.55     UDP
DemonwarePortMapping     3123     3074     192.168.88.55     UDP
DemonwarePortMapping     3102     3074     192.168.88.55     UDP
DemonwarePortMapping     3148     3074     192.168.88.55     UDP
DemonwarePortMapping     3111     3074     192.168.88.55     UDP
DemonwarePortMapping     3124     3074     192.168.88.55     UDP
DemonwarePortMapping     3131     3074     192.168.88.55     UDP
DemonwarePortMapping     3150     3074     192.168.88.55     UDP
DemonwarePortMapping     3192     3074     192.168.88.55     UDP
DemonwarePortMapping     3176     3074     192.168.88.55     UDP
DemonwarePortMapping     3125     3074     192.168.88.55     UDP
DemonwarePortMapping     3129     3074     192.168.88.55     UDP
DemonwarePortMapping     3177     3074     192.168.88.55     UDP
DemonwarePortMapping     3115     3074     192.168.88.55     UDP
DemonwarePortMapping     3162     3074     192.168.88.55     UDP
DemonwarePortMapping     3116     3074     192.168.88.55     UDP
DemonwarePortMapping     3147     3074     192.168.88.55     UDP
DemonwarePortMapping     3134     3074     192.168.88.55     UDP
DemonwarePortMapping     3133     3074     192.168.88.55     UDP
DemonwarePortMapping     3100     3074     192.168.88.55     UDP
DemonwarePortMapping     3109     3074     192.168.88.55     UDP
DemonwarePortMapping     3095     3074     192.168.88.55     UDP
DemonwarePortMapping     3127     3074     192.168.88.55     UDP
DemonwarePortMapping     3190     3074     192.168.88.55     UDP
DemonwarePortMapping     3117     3074     192.168.88.55     UDP
DemonwarePortMapping     3126     3074     192.168.88.55     UDP
DemonwarePortMapping     3084     3074     192.168.88.55     UDP
DemonwarePortMapping     3182     3074     192.168.88.55     UDP
DemonwarePortMapping     3138     3074     192.168.88.55     UDP
DemonwarePortMapping     3175     3074     192.168.88.55     UDP
DemonwarePortMapping     3171     3074     192.168.88.55     UDP
DemonwarePortMapping     3165     3074     192.168.88.55     UDP
DemonwarePortMapping     3180     3074     192.168.88.55     UDP
DemonwarePortMapping     3169     3074     192.168.88.55     UDP
DemonwarePortMapping     3085     3074     192.168.88.55     UDP
DemonwarePortMapping     3105     3074     192.168.88.55     UDPDemonwarePortMapping     3194     3074     192.168.88.55     UDP
DemonwarePortMapping     3074     3074     192.168.88.55     UDP
192.168.88.55     9308     9308     192.168.88.55     UDP

Btw i noticed everytime i reset cod mw 2019  these more was added they were added one at a time

So i thought these ports are needed as well but now i think there optsinal

Here are the ports network monitor  shows are in use for cod mw 2019  i will add more when i find them

30410  35710  30350   31300  35300  37160  31350  36360  32700  32710 39860  38280
39500  42420  43300  30040  30080 32560   31080  32540  30110   30020   30030   30070
30230  30500  30600  31030  32930  33640  34260  36050   36290  36930 39550  43610  43840  44790
30020   :30010   :32680   32310   :32350  :30190    :34790 :34790    :30070     30100     32560   :32580  30060  33420
33420    40820  36800  32310   30550 30520 30130 30060  35310  32550   30040  30310    30160  32590   39300   32460   32490   32550  35800   3258032570

These  ports  made into a range by   east   so thank you to them

They have a brilliant guide on these forums i recken you guys read it

I think its the best one

 

 

 

 

 Please if you found this helpful  please vote

this thread was started over a year ago and we are still have no clue if there gonna bring it back

SORRY IF  I DOUBLE POSTED A FEW PORTS TWICE BUT I HAVENT HAD TIME TO EDIT THIE LIST YET

 

BTW ANY PORTS LISTED BELOW HERE ARE FOR OLDER COD

But you can still see how the people use traffick  prortization correctly  you just input your ports instead of the outdated ones 

Hello! im new to this of port forwarding. Ive bought my netgear router for gaming as i Live in the caribbean (PUERTO RICO) and i want the best hit registration possible. My geo filter is set to florida US that there is a dedicated server sometimes connects to georgia but i think thats when the servers nearest are full. 

 

all i need to do is port forward THIS number? 3074 UDP? i dont know much about the router so thats why i try to read everything before asking. as im traducing everything in my head lol

Thanks in advance!

Share this post


Link to post
Share on other sites

To get the best hit reg hit detection

You wanna use traffi priortozation in the qos settings

You want to put these in the traffic priotization

Rule 1 source start 3074 end 3075   destination  start 30000 end 45000 udp protocol

Rule 2 source start 30000 end 45000   destination start 3074 end3075 udp protocol

These other rules are optional

Rule 3  source start 3074 end 3075 destination start 3100 end 3500 udp protocol

 Rule 4 source start 3100  end 3500  destination start 3074 end 3075 udp protocol

Rule 5  source start 3074end 3075 destination  start50000  end 65535 tcp

Rule 6 source start 50000 end 65535  destination start 3074 end 3075

 

You can try these this is for both xbox and ps4 as you never mentioned what you play on

Also i would disable classified games in traffic priotization

I hope this help

 

 

 

 

 

Share this post


Link to post
Share on other sites

Just checked this and after few matches I noticed better registration! It works for me ! 

But I have a question about port forwarding. Do I need to open those ports manually also in the port forwarding option ? Because this is just a prioritization for those ports and ports have to be added manually in port forwarding right ? Or UPnP will also work in this case? Or should I totally open them via DMZ ? 

Share this post


Link to post
Share on other sites
1 hour ago, TomaLLoS said:

Just checked this and after few matches I noticed better registration! It works for me ! 

But I have a question about port forwarding. Do I need to open those ports manually also in the port forwarding option ? Because this is just a prioritization for those ports and ports have to be added manually in port forwarding right ? Or UPnP will also work in this case? Or should I totally open them via DMZ ? 

You don't need to open the ports at the same time, if you have an Open NAT then you don't need to change anything else. UPnP should open the ports for you when needed.

Share this post


Link to post
Share on other sites
19 hours ago, Netduma Fraser said:

You don't need to open the ports at the same time, if you have an Open NAT then you don't need to change anything else. UPnP should open the ports for you when needed.

Oke that means I should live UPnP on and disabled DMZ if I understand correctly.

Because I noticed that should be only one option available at the same time. For example if I have UPnP then port forwarding should be off, and DMZ and port triggering

Share this post


Link to post
Share on other sites
15 minutes ago, TomaLLoS said:

Oke that means I should live UPnP on and disabled DMZ if I understand correctly.

Because I noticed that should be only one option available at the same time. For example if I have UPnP then port forwarding should be off, and DMZ and port triggering

Yes that's right, though UPnP and DMZ isn't too bad but do try with it disabled first.

Share this post


Link to post
Share on other sites
On 5/5/2020 at 10:10 PM, TomaLLoS said:

Just checked this and after few matches I noticed better registration! It works for me ! 

But I have a question about port forwarding. Do I need to open those ports manually also in the port forwarding option ? Because this is just a prioritization for those ports and ports have to be added manually in port forwarding right ? Or UPnP will also work in this case? Or should I totally open them via DMZ ? 

You could try  with dmz enabled  thats what i would do

Also please remember to vote if this helped you  

Share this post


Link to post
Share on other sites
15 hours ago, TomaLLoS said:

Oke that means I should live UPnP on and disabled DMZ if I understand correctly.

Because I noticed that should be only one option available at the same time. For example if I have UPnP then port forwarding should be off, and DMZ and port triggering

I personally port forward and turn off upnp.

DMZ should only be used as last resort. 

Share this post


Link to post
Share on other sites
On 10/31/2018 at 1:31 PM, kinel said:

I HAVE UPDATED IT FOR COD MW READ JUST BELOW HOPE ITS NOT TO CONFUSING BUT THIS TOPIC WAS STARTED A LONG TIME AGO

It also now shows you how to traffic protize cod mw ports 2019 below

 

 I WILL POST  COD MW PORTS  jUST  BELOW HERE these are the ones i found so far i will keep updating it with new ones here

 

I recently upgraded to new dumar os fw and think its great but its missing one thing important i think

 

In network monitor it now does not show you what ports the game you play is connected to uses

In cod bo4   now cod mw 20019   i used this feature all the time 

In cod bo4 same for cod mw19 everytime you would join a new lobby  it would show us new ports it was connected to.

You would always be connected to two  ports in every game this first port is always port 3074 udp the second was always diffrent ever new lobby you join uses diffrent ports

If you stayed in the same lobby for an hour the two ports would be the same for an hour or how long you stayed in that lobby . Once you change lobbys  the game changes ports it uses so you need to put new ports in traffic  priortaztion

I think this is why the connection keeps varying 

 

For cod  mw 2019  its now three ports instead of two

 

HERES  WHY ITS IMPORTANT

when i put in the ports it uses for that game in traffic priortization my hit registration would get a lot lot better  i did this before on cod ww2 now i do it for cod mw2019 and it helped my hit registration  .And on cod bo4 

Somtimes i would do this during a game.    i would be playing a game and struggling to get a kill then in same lobby same people playing i would enter those port number in and the hit registration was great easier kills same for cod mw2019

EVEN  IF YOUR NOT PLAYING COD you still might need it for other games.

 i used it for all my other games to help get a better connection  and i would like to use it in the future for new games

I really dont wanna downgrade to an older fw just to use this feature as it was so GREAT

SO ANY GAME YOU WANNA SEE  WHAT  PORTS IT USES YOU NEED THIS 

As some games it dosent  tell you all the ports it uses

I would love to use this for red dead redemption 2 online when its released soon

Fraser told me if enough peole want this feture back in the firmware they would put it back in

SO I JUST PUT A POLL UP    SO PLEASE VOTE   THANKY YOU  

So i am asking any who  might use it before or might wanna use it in the future please vote on the poll here if you would like to see it in i future update

I hope i made sence sorry for any typos

And please post to say you would like it the more people who say they want it they saidthey would reinstall it if the demands there

Thanks 

 i have now edited to update for cod mw

READ FROM HERE for cod mw 2019 and how to set up ports correctly 

From members who know how to set it up correctly  below

RL317  shows how to in this post below 

He knows more about it than i do ahe advised me how to set it up correctly

 

Just letting you guys know i think now playing cod mw that the next update that the dumar has has to reinstall the older network monitor 

My hit detection \hit registration  is now brilliant since i done these steps

Heres why

If you want your hit registration or hit detection  to be great read this

When playing cod mw  the game uses 3 ports to play thats if you want godd hit detection  \hit registration 

The first is port 3074 this is on ps4 i think its 3075 on xbox but i am not sure i dont know about pc

The second port stays the same untill you restart the game i think this is the data centre or either matchmaking

The 3rd port is  changes every new game  this is the dedi or peer your playing on

Thats why you see new people every game  and thats why you do good one game but not the next

Thats because you changed dedis  and the ports have changed

 

 So thats why you need 3 ports every game  the first is 3074  the send is the matchmaking or data centre the 3rd is for the game mode you play

Atm i am making a list for  the ports it uses

Just letting you know  you can do this yourself to see what ports is needed  but you have to downgrade to the older firmware  well thats on netdumar1

I dont know about other routers  

Also this cane be done if you have a router with openwrt on it

You would have to ask admins   as i dont know anything about the other routers

 

Heres a way to put the ports in traffic priortization

Source  3074-3075 destination  30000-45000 udp  rule 1

Source 30000-45000  destination 3074-3075 udp   rule 2

Source  3074-3075  destination 3100-3500 udp    rule 3 not nessasery optional 

Source  3100-3500  destination 3074-3075 udp    rule 4 not nessssery optional

 

HERES A LOAD OF PORTS TH GAMES COD MW USES

Heres is a copy of my upnp settings screen after playing a losd of cod mw 2019

192.168.88.119     9308     9308     192.168.88.119     UDP
DemonwarePortMapping     3074     3074     192.168.88.119     UDP
DemonwarePortMapping     3163     3074     192.168.88.55     UDP
DemonwarePortMapping     3153     3074     192.168.88.55     UDP
DemonwarePortMapping     3172     3074     192.168.88.55     UDP
DemonwarePortMapping     3184     3074     192.168.88.55     UDP
DemonwarePortMapping     3155     3074     192.168.88.55     UDP
DemonwarePortMapping     3123     3074     192.168.88.55     UDP
DemonwarePortMapping     3102     3074     192.168.88.55     UDP
DemonwarePortMapping     3148     3074     192.168.88.55     UDP
DemonwarePortMapping     3111     3074     192.168.88.55     UDP
DemonwarePortMapping     3124     3074     192.168.88.55     UDP
DemonwarePortMapping     3131     3074     192.168.88.55     UDP
DemonwarePortMapping     3150     3074     192.168.88.55     UDP
DemonwarePortMapping     3192     3074     192.168.88.55     UDP
DemonwarePortMapping     3176     3074     192.168.88.55     UDP
DemonwarePortMapping     3125     3074     192.168.88.55     UDP
DemonwarePortMapping     3129     3074     192.168.88.55     UDP
DemonwarePortMapping     3177     3074     192.168.88.55     UDP
DemonwarePortMapping     3115     3074     192.168.88.55     UDP
DemonwarePortMapping     3162     3074     192.168.88.55     UDP
DemonwarePortMapping     3116     3074     192.168.88.55     UDP
DemonwarePortMapping     3147     3074     192.168.88.55     UDP
DemonwarePortMapping     3134     3074     192.168.88.55     UDP
DemonwarePortMapping     3133     3074     192.168.88.55     UDP
DemonwarePortMapping     3100     3074     192.168.88.55     UDP
DemonwarePortMapping     3109     3074     192.168.88.55     UDP
DemonwarePortMapping     3095     3074     192.168.88.55     UDP
DemonwarePortMapping     3127     3074     192.168.88.55     UDP
DemonwarePortMapping     3190     3074     192.168.88.55     UDP
DemonwarePortMapping     3117     3074     192.168.88.55     UDP
DemonwarePortMapping     3126     3074     192.168.88.55     UDP
DemonwarePortMapping     3084     3074     192.168.88.55     UDP
DemonwarePortMapping     3182     3074     192.168.88.55     UDP
DemonwarePortMapping     3138     3074     192.168.88.55     UDP
DemonwarePortMapping     3175     3074     192.168.88.55     UDP
DemonwarePortMapping     3171     3074     192.168.88.55     UDP
DemonwarePortMapping     3165     3074     192.168.88.55     UDP
DemonwarePortMapping     3180     3074     192.168.88.55     UDP
DemonwarePortMapping     3169     3074     192.168.88.55     UDP
DemonwarePortMapping     3085     3074     192.168.88.55     UDP
DemonwarePortMapping     3105     3074     192.168.88.55     UDPDemonwarePortMapping     3194     3074     192.168.88.55     UDP
DemonwarePortMapping     3074     3074     192.168.88.55     UDP
192.168.88.55     9308     9308     192.168.88.55     UDP

Btw i noticed everytime i reset cod mw 2019  these more was added they were added one at a time

So i thought these ports are needed as well but now i think there optsinal

Here are the ports network monitor  shows are in use for cod mw 2019  i will add more when i find them

30410  35710  30350   31300  35300  37160  31350  36360  32700  32710 39860  38280
39500  42420  43300  30040  30080 32560   31080  32540  30110   30020   30030   30070
30230  30500  30600  31030  32930  33640  34260  36050   36290  36930 39550  43610  43840  44790
30020   :30010   :32680   32310   :32350  :30190    :34790 :34790    :30070     30100     32560   :32580  30060  33420
33420    40820  36800  32310   30550 30520 30130 30060  35310  32550   30040  30310    30160  32590   39300   32460   32490   32550  35800   3258032570

These  ports  made into a range by   east   so thank you to them

They have a brilliant guide on these forums i recken you guys read it

I think its the best one

 

 

 

 

 Please if you found this helpful  please vote

this thread was started over a year ago and we are still have no clue if there gonna bring it back

SORRY IF  I DOUBLE POSTED A FEW PORTS TWICE BUT I HAVENT HAD TIME TO EDIT THIE LIST YET

 

BTW ANY PORTS LISTED BELOW HERE ARE FOR OLDER COD

But you can still see how the people use traffick  prortization correctly  you just input your ports instead of the outdated ones 

The Various ports you listed at the bottom, was the source port for them ports always 3074?

Share this post


Link to post
Share on other sites
On 4/19/2020 at 4:47 PM, kinel said:

To get the best hit reg hit detection

You wanna use traffi priortozation in the qos settings

You want to put these in the traffic priotization

Rule 1 source start 3074 end 3075   destination  start 30000 end 45000 udp protocol

Rule 2 source start 30000 end 45000   destination start 3074 end3075 udp protocol

These other rules are optional

Rule 3  source start 3074 end 3075 destination start 3100 end 3500 udp protocol

 Rule 4 source start 3100  end 3500  destination start 3074 end 3075 udp protocol

Rule 5  source start 3074end 3075 destination  start50000  end 65535 tcp

Rule 6 source start 50000 end 65535  destination start 3074 end 3075

 

You can try these this is for both xbox and ps4 as you never mentioned what you play on

Also i would disable classified games in traffic priotization

I hope this help

 

 

 

 

 

 

On 12/17/2019 at 7:31 AM, kinel said:

All you need to do is  put these ports into taffic proirtization

Rule1  source start  3074   3075       end destination  30000 45000 udp

Rule 2  start  source  30000 45000   end destination    3074 3075   udp

These ports  you put in will make you hit detection briliant

Thats The simplest way to explain it

 This guide was made a long time ago for bo4 

Thats why its confusing sorry 

But you could  use the ports i posted here  instesd of the old ones

But throughout this thread users here gave some great helpful advice  and shown details on how to do it as well

East on these forum has a better guide than mine its brilliant i think if you do read it read through it  all  theres lots of good help from users in it 

A user on his guide shows a tactical nuke from using easts guide

This thread was never meant as a guide    

The second rule doesn't seem to work, playing Ps4 Bo4-Blackout any advice. And Some times DumaOS classified games enables it self even when turned offS Classified Games

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...