Search the Community
Showing results for tags 'blackout'.
Netduma XR500 V184.108.40.206 Location: Jamaica Bandwidth Speed: 50 DL 20 UL CC: 70% DL 85% UL Geo Filter Location: USA Ping Assist: 30 ms With all of that info i don't know what else to do regarding netduma tonight it was i was fire ping pong balls. Emptying a clip into players only to turn around to get two shot and dead, Watching the kill cam half of the bullets registered and they just shot me and i am down. I do everything, restart the modem, xbox and netduma same thing. What you guys suggest?
Hey guys, I've been lurking on these forums for a while now though this is only the second time I've posted. Let me start by saying thank you to anyone and everyone whom takes the time to read this, even if you don't know what to make of it, or haven't a piece of helpful information to put forward. Let me also say I have learned so much about networking and technology over the last 3 years searching for a resolution to my problem, and for that I am thankful because I truly am passionate about technology and learning about the underlying mechanics that drive it and even allow it to operate. But with that said, I should have come here sooner looking for help but I'm stubborn and tend to be impatient, and posting in a forum to wait forever for a response seems unattractive as I have had not great experiences with posting on forums in general and receiving help. I'm also autistic and tend to be more of an introverted recluse, so asking for help isn't something that comes easy for me. A brief foot note I'll add in an effort to be as through and helpful as possible. My services are internet only 300/300 symmetrical. Provider of course being Frontier. Network topology is very simple which is as follows, Alcatel Lucent i-211m-l ONT - Nighthawk XR500 - LAN. I've gone down the list of simple common sense troubleshooting recommendations you'd expect from anyone with even the slightest inkling into networking such as, eliminating the possibility of a bad Ethernet cable, running ping plotters to check for oddities in line activity, even doing line quality checks at dslreports.com, and to no avail. From all that I can tell with ping plotter line quality appears great as you'd expect on a fiber optic connection. I can share results of dslreports line quality test or ping plotter if requested, but again no indication as far as I can tell that anything is a miss. One thing I will say though that strikes me as odd, and having read extensively on NAT, especially enjoying the comprehensive and meticulously written article Badmodems has on the subject. Full Cone, Partial Cone, and Port Restricted NAT being the most common ways NAT is implemented, it confuses me that when I forward a port to say my phone to check if it's actually being opened, then do a port scan from say canuseeme, sometimes I get a LAN access from remote in the logs indicating to me that a connection to said port was at least attempted, sometimes I don't, but it never says on the other end that it was successful. It either always says connection timed out, or port closed. Even with NAT Filtering set to open. Which bothers me more than a little. I've also read a little about Teredo regarding Xbox and how Microsoft handles NAT and the implications of needing players to have the ability to connect to one another. I definitely have a few questions regarding that and possibly what Sony's version of Teredo is. My problem has followed me across two ISP's and two routers for three years now. First with spectrum using a Nighthawk R7000, and a Arris Surfboard cable modem I purchased to entirely eliminate ISP equipment from the equation. Now with Frontier Fios, an Nighthawk XR500 and a direct connection to an Alcatel-Lucent i-211m-l ONT. The common denominator being Netgear Nighthawk routers. The issue I'm experiencing is strange to say the least. Every device I own and use I experience "lag" or latency when using said device. A list of those devices includes an Xbox one X, PlayStation 4 Pro, Asus ROG Phone 2, Razer Phone 2, Dell Laptop, and many more I won't arbitrarily list. Suffice it to say it's anything and everything I use. Alongside a very high latency when using any of these devices is a strange phenomenon, where I feel like things on the screen are almost warping and changing size, almost the way say a scaling feature would work. And with that also comes this odd two dimensional quality everything from games to YouTube videos exhibit. To elaborate on that a little more, as a for instance when I am not experiencing the issue (which is very rare) things look amazing in games, be it on my ROG phone 2 playing PUBG Mobile, or on my PlayStation 4 Pro playing Call of Duty. It's like the textures are so alive with depth and detail and the colours appear so much more vibrant, intricate, and present. Strangely enough, I would describe the issue I have with audio in a very similar manner, where all the detail and nuance is gone. I can't hear enemy players in things like PUBG Mobile or Call of Duty for the life of me (literally lol) until it's too late or I'm dead. Sensitivity in games is also very inconsistent, and never feels the same. Whether it's the touch screen of my phone, keyboard and mouse, or a controller. YouTube videos appear pixilated and blurry almost, lacking in visual and audible information. Players in games like Blackout and PUBG Mobile are very difficult for me to spot. And distances are very difficult to gauge, where it seems like things on the map, be it players or objects, appear farther away than they should be. Things like my wingsuit in Blackout are consistently pixelated and fail to properly render in. And lighting and shadows are also very strange with things appearing darker than they should be sometimes, like shaded areas and inside of buildings. Sometimes I'll walk into a structure for instance, like long barn in Blackout right beside red barn, by wagers and silo and it will be dark and oddly lit and suddenly the lighting will change where I can see and it's lit up the way it should be. There are other oddities such as haptic feedback being horribly inconsistent across the board on every Android device I've owned in the last three years. And typing feels very slow and tedious, with what I would also describe as a "lag" or latency regarding the input of characters and haptic response to hitting a key. Again, when things are working properly the small percentile of the time they do, this is not the case and everything feels so responsive and it's effortless to type things out. And on a $1000.00usd phone sporting a Snapdragon 855+ , Adreno 640 GPU, Cortex A-76 architecture, and a prime core clock speed of 2,960 MHz, I would hope the very least I should expect to be a responsive keyboard lol ;D. Anyway I've rambled long enough, and apologize for being long winded. To anyone who reads this, let me thank you once again for doing so regardless of whether you have some helpful piece of wisdom to offer or not. I'm at my wit's end with this issue and it's causing me to go to some very dark places psychologically, so any help is most certainly appreciated. Again from the bottom of my heart, thank you.
Hallo everyone. I have been using the Nighthawk XR500 router for a while now and I am very pleased with the gaming experience that it brings to console gaming with the QOS, GeoFiltering etc. I can manage my home network to get the best gaming experience without neglecting any devices on my network. I currently want to use the HybridVPN feature to be able to connect to lobbies in the USA or anywhere else in the world where the players have a wider variety of Blackout modes to choose from to play. In South Africa where i live, we only get one or at the most 2 different Blackout modes to choose from. Currently we can choose Alcatraz or Quads. It has been said that South Africa is limited to game modes due to the fact that we don’t have a player base large enough to fill up all the game modes for blackout( but then just show is how many people are in the different modes and we can choose). Be that as it may, I am using the recommended PureVPN that the router suggests and i set it up to connect to the USA Houston location. I get connection and i can enter the game mode selection area for blackout and i see all the other modes available which is not available to us in SA. But when i deploy to find a game i just can’t get a game found, the screen just searches endlessly. I don’t have my console setup with a static IP nor in the DMZ of the router.I have my geofilter set to cover the US and tried having the whole map covered in the geofilter. Can anyone please assist me? I am not sure if this is a setting issue or a game matching issue? The first picture is the South African Blackout game modes taken before the Alcatraz update and the send picture is when i’m Using the VPN to connect to Houston. You’ll see the difference in the modes. Can someone please advice on how to get this to work. As i said, i can connect, select any game mode, but just can’t find a game.