Search the Community
Showing results for tags 'Gigabit'.
Found 2 results
I have the XR500 and it's on the latest 2.x.x.x firmware and at times, it gets so sluggish both with wifi and wired. It got so bad at one time that I had to reset it to factory defaults. Problem: I use my computer for work and have several meetings consisting of audio/video and this device has hesitation at random times both using wired and wireless connection. All of the iPhones and sometimes the Apple TVs experience a delay in response when loading an app or streaming app. Occasionally the gaming PCs have the same issue.When this happens, I check my ISP speed and 99% of the time, it checks out as correct. Just overall, it's random and the XR500 is just overall sluggish. At times, DHCP doesn't even work until I reboot. Games played: PS4s are all pretty much exclusively Red Dead redemption 2 Online. Gaming PCs are a mix of League of Legends, Fortnite, Roblox, Minecraft, Halo, Valorant, and several other online shooters from Steam and EPIC. Here is my scenario and my config below: ISP: AT&T Fiber gigabit internet Modem: Arris BGW210-700 (Internal WiFi is entirely disabled and DHCP as well) Switches: *****Ground Floor is Nighthawk S8000 *****Upstairs is a Netgear GS108-400NAS 8 Port 10/100/1000 dummy switch ****Basement is another Netgear GS108-400NAS 8 Port (The Netgear GS108 switches are there because I was not happy with multiple S8000's on my network) Environment is explained below but it goes as follows: modem->XR500->ground floor S8000 and also to basement Netgear GS108 Modem (only used to authenticate to AT&T and is bridged to my XR500 but my wife's computer is not affected by reconfig/reboot of XR500 because it is directly connected to the modem with a static IP. All modem settings are disabled including DHCP) WAN Port: Uplink to AT&T Fiber connection Port 1: Uplink to XR500 Port 2: Wife's work computer Port 3: S8000 Switch Port 4: Open XR500: (Actively providing DHCP, QOS is not configured, GeoFilter is not configured and there is no DMZ and very few port forwards to the PS4 Pro) Port 1: Uplink from Modem and priority critical Port 2: Uplink to Ground Floor S8000 Port 3: PS4 Pro on ground floor WiFi Config: Guest network disabled. SSID is encrypted, Smart Connect enabled, WMM enabled, Beamforming enabled, EU-MIMO enabled Ground Floor S8000 setup: All default settings and is configured as such: Port 1: Basement Netgear GS108 and priority is critical Port 2: Open Port 3: Apple TV on Ground Floor and priority medium Port 4: DirecTV box and priority low Port 5: Ground floor TV and priority los Port 6: Philips Hue hub and priority low Port 7: Open Port 8: Upstairs GS108 Basement GS108 setup: Since it's a dummy switch, the ports are scattered with the following 7 wired devices connected: Mac Pro, PS4, PS3, Gaming PC1, Gaming PC2, Wii Plus, Smart TV (one port not used) Upstairs S8000: Port 1: Gaming PC 3 and priority medium Port 2: Nintendo Switch wired via its dock and priority medium Port 3: Open Port 4: Open Port 5: Open Port 6: My work PC and priority high Port 7: PS4 Pro and priority critical Port 8: Uplink from and priority critical WiFi Devices: There are a slew of devices such as 5 iPhones, 5 iPads, Apple TV Upstairs, Roku Stick, 4 wireless security cameras, 4 laptops, Ring Doorbell Hopefully I've provided enough information on the situation but if not, please feel free to ask for more. I also downloaded the beta of DumaOS 3 wondering if it may help.
Hey guys, New to the forum here. Just picked up my Duma during the Black Friday sale. I am losing my mind right now trying to find good settings for COD WW2. I have a gigabit fiber line (1k up & down) and I feel like I am remarkably laggy in 95% of my games. I live in LA (Los Angeles not Louisiana) and with geo filtering set to between 500 / 600 miles and strict mode ticked, I'm often connected to hosts 2500 to 5000 miles away with player pings ranging from 150ms to 550ms and I've even seen up to 1000ms when it connects me to servers in the UK. I'm a hardcore player but I've recently started playing some core game modes to watch the kill cams and see how someone killed me that wasn't on my screen. In the replays, other players are standing in front of me, clear as day and it looks as if I'm an easy afk kill. I've tried every setting I've found suggested on the forums and everything I've found on youtube. The issue is I can't find much info for fiber setups and if I do, it's people with speeds around 100 down and 10 up. The only thing so far that has occasionally given me decent games is to massively throttle my connection. It's not enough to do it with the CC sliders though. I have to change my bandwidth to 100 down and 100 up and then drop my CC sliders way down. I've tried reactive & preemptive and always have super turbo off so I can utilize CC. Router is on the newest firmware, system is hardwired, ports are forwarded, NAT is open and I live alone so the only other device connected is my laptop running nothing but the netduma router config page. Issue remains the same regardless of if I'm playing in a party (hosting or not) or playing solo. Any input is GREATLY appreciated. Let me know if you need more information. Im an IT so I can ramble on and go level 10 nerd if it's helpful. :-) Thanks! PS4 Pro - COD WW2