Sgt-Greco

Yes, actually it's the predecessor of OpenWRT
Nothing special . Here is all my settings in one pic.
I use 90-95% Down/Up.
Maximum Priority to my PS4 only  (use /32 after it's IP address) and whenever I want to do some testing limiting it's bandwidth, I turn it to Manual.
I do not use UPnP or DMZ.
That's it.

 
 

Still on DD-WRT and enjoying the game (CW beta) . Reduced my FOV to 90 , objects are rendered fast and I'm having a blast. Can't wait for  full release.

Hi. here is my 2 cents.
MW is most of all a noob friendly game (Joe Cecot's words, not mine). What makes you think that state-of-the-art routers, snappy ISPs  or 1 ms monitors will help ? Personally I think there is no difference at all.
The majority of new players that can't afford this kind of stuff, is Activision's main target group.
Yes. Throttle your bandwidth really hard. You'll probably have a couple of good games until SBMM kicks in to send you back to sweaty lobbies.

Hi. here is my 2 cents.
MW is most of all a noob friendly game (Joe Cecot's words, not mine). What makes you think that state-of-the-art routers, snappy ISPs  or 1 ms monitors will help ? Personally I think there is no difference at all.
The majority of new players that can't afford this kind of stuff, is Activision's main target group.
Yes. Throttle your bandwidth really hard. You'll probably have a couple of good games until SBMM kicks in to send you back to sweaty lobbies.

I've tested almost every Up/Down combination.
Unfortunatelly I can't avoid Ping Under Load = D. My upload is killing me and I can't figure out why.
 

You will need to use Congestion Control with Always selected and change the percentages and experiment to see what % brings down the Ping Under Load results the most. It is simulating what the ping would be like if the network was saturated.

More of my stats for those who wanna dig down: https://cod.tracker.gg/modern-warfare/profile/psn/Arc_TJX/mp/matches
I have been using this setting for hours. and the result is good so I wanna share this. 
at first you need to configure your QoS on DDWRT. Please see the following 

Use 25% of your ISP Speed Package. I have 1000/100 package, so I throttle total bandwidth to about 250/25
Now use this formula 
Total Throttled BW / Number of Devices connected to DDWRT (BW divided by no. of devices, both lan and wireless)
In my case, it is 250/17 = about 13-14mb download 
and 25/17 = about 1.4 upload. 

Now you have to set each device to have X download and Upload (Based  on formula above) 
for me I don't bother setting each device because i have 14 devices connected to my DDWRT. So I just have 'Enable per user default Units' box checked. So ideally each devices at my house will have bandwidth of 14/1.4 speed

And that's it for QOS setting for DDWRT
Now you go to make sure UPNP is enabled in DDWRT 
 
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Now for Netduma, since I need its Geo-Filter feature, so in its QOS page, do as following 
- UPNP Off
- Disable QoS  - If you do this, anti bufferbloat, flower graph and traffic prioritization will not be working anymore. 

And that's it 
Emjoy 'Shoot First Kill First moments'

I know a few things. How can I do that without a ssh access? 

Hi. 
Is it possible to add a crontab command for scheduled reboots? 
thanks

I'll try to explain my gaming experience with my limited English vocabulary...
With DUMA OS I feel tense and I find myself gripping my controler harder than usual, getting ready for the imminent gunfight which I'm almost certain I'm about to lose.
On the other hand with OpenWRT the game feels like it "flows" better and I can obtain a momentum easier.  I'm not saying I'm kicking ass with OpenWRT as I am a mediocre player. But at least I have a good feeling at the end that I did the best I could.
I'm afraid I can't explain it better.....
 

OpenWRT is what I'll be turning to next as I'm having 0 luck with DumaOS. Someone can be in my face and I hipfire with a laser... hitmarker after hitmarker and they melt me like I'm not even firing. Yet when someone hipfires me... I drop faster than I can blink.
I did have a brief play with OpenWRT (plugging my console into OpenWRT router) and noticed people drop alot quicker than with DumaOS... but if I plug console into Duma, disable BB and just use OpenWRT SQM... peoples take forever to drop.
I always found OpenWRT was much better with Black Ops 4 also.

I would disbale classified games and remove any hyperlanes you have set.
i would use other features as normal.
my app will add the correct port for current game on cod so you dont want any conflicts.

Not only you as mentioned earlier i forgot to add it. I will add it back

Nah, he said he forgot to put that in or something like that. Don't worry... still works great 👍

I know this is an unpopular comment but I like this game.
Ppl tend to like the games that their good at and I understand it. You can't like a game when your butt is constantly kicked,  unless you are a moron.
Devs have made huge mistakes. No doubt. They have screwed mini map, dead silence, prestige system, map voting and so on. You don't touch things that are not broken or no one ever complained about. But the community is also responsible for the all this negativity. Campers with claymors, RPGs fired at the flags, shotguns in corridors etc.
Anyway, I try to avoid TDM as much as I can and I only play Hardpoint/Headquarters using flanking routes. This is my way to avoid all the crap above. And I'm having fun...
 

New bells and whistles with the new DD-WRT builds.

Just to know guys..😃
Version 1.3.3  Works without problem in R1  via VirtualBox with Windows 7 Ultimate under MXLinux.


**Main router is TP_Link with DD-WRT...QOS... Cake+HFSC....Services Priority...ports 30000-60000 at Maximum.
**R1 in TP_Link's DMZ....i give static IP to R1 outside TP_Link's DHCP Server range.
Big thanks to @RedBull2k

@RedBull2k   Is it possible to have a version that runs under linux????Like  etc. priority.sh   or have the code to run as custom script via dd-wrt?

Hey Alex.
A brand new 18POW just arrived but again, no luck. Just sent an email describing the problem and asking for my options.
Best regards....

Cake no. It has SFQ, codel and fq_codel.
In OpenWRT, SQM is not embedded in the firmware once you install it. You have to manualy download it as an extra script from the OpenWRT's database.
It's true that OpenWRT is now more resource demanding thus your machine will suffer. 
Also keep in mind that OpenWRT will not provide you (by default) throttling or priority per IP so you have to achieve it with custom comands, something very difficult unless you are good with linux  and networking. I'm not, so I try to avoid it.
Cake is more like a fair share of bandwidth to all devices. But as a gamer I assume you don't care about Bandwidth Fairness and Network Democracy but Strict Dictatorship 😊, right?  It's me and all the other stuff.
For all of the above reasons, I'd suggest DD-WRT. Light and easy. Here is an emulator if you want to play around.
Best of luck

Thank you sgt greco 

Thank you n3cro  zippy  sgt greco
Sgt greco i was hoping you would join in on this topic
As ive seen your name on these forums for a few years a when i was searching info on open  wrt forums
Im pretty sure i seen your name in there  
Does ddwrt have algorthyms  like cake and fq codel
As im pretty sure that if i download open wrt that version dosent have sqm
As what i was reading the tp link wr841n  only has 4mb of ram so its not enough space to run it 
But i new to this so im not sure
 

LEDE merged with OpenWRT .  LEDE kept their forum page but the firmaware's name is OpenWRT. It's excactly the same thing.
I've tested it extensively. I've also tested Gargoyle and DD-WRT. 
My opinion is (that for us gamers) DD-WRT is the king. 

Hmm I'm wondering if it might be broken. Could you email us at [email protected] with a link to this post? Thanks.

It amazes me year after year on this forum if anyone says anything negative about the duma not working a gang of people attack them.  Every paying customer has a right to their opinion positive or negative.  Let the man voice his concerns and let the moderators get him some answers.   Jumping in and saying "My duma works fine" doesn't do him any good now does it? Attacking him doesn't help the issue either. It just makes the Netduma forums look bad.  
Also if you jump in offer some advice and he doesn't accept it then move along. You tried leave it at that. You staying here and fighting is what's wrong with this forum. You don't work for Netduma. His issue is with the Netduma Product not you.  Let the Netduma employees help him because that's what he was trying to do in the first place.