Jump to content

Leaderboard


Popular Content

Showing content with the highest reputation since 05/06/2020 in all areas

  1. 9 points
    When will we be able to change the congestion algorithm that the R1 uses? In the last few seconds of this Netduma announcement video you can see the download graph and it looks like Cubic Congestion Control is used. This is sub-optimal for gaming since it doesnt consider roundtrip time or other metrics that are relevant for gaming devices in your network. And using Cubic is probably also the reason for why we are forced to set our connections to 70% to prevent congestion. Ages ago Iain claimed to have created a congestion control algorithm that in his lab allowed him to max out his complete connection while his ping only spiked by 5 milliseconds. Googles BBR Congestion Control is very close to what he promissed, is out for several years now and could probably be implemented very quickly by you guys. For those who dont fully understand what i mean here is a picture from google: In the last few seconds of the Netduma Video above you can see the bandwidth graph which basically looks like left graph below in the picture. This is bad and causes lag. What you want is the right graph it gives more bandwidth AND less lag. It has some downsides but those could be adressed by the R1 only assigning BBR to gaming devices for example.
  2. 6 points
    We're still planning on doing the announcement today, it'll be a bit later though... About 8pm UK time? I know it's late but we're rushing here to get everything ready!
  3. 4 points
    Netduma Alex

    DumaOS 3.0 Beta

    Big announcement today. Keep it locked to our social media!
  4. 4 points
    pollutionblues

    Auto ping vs in game ping

    In game ping meters add processing delay etc. All games do this, that is why the in game ping is higher. Auto Ping is your direct ping to the server and this is what you should focus on as it is what you can control.
  5. 3 points
    LegendMask

    DumaOS 3.0 Beta

    I am not complaining or being impatient just wanted to make sure it was registered because usually in similar cases you get an email confirming registration
  6. 3 points
    Cussiv

    DOUBLE NUKE (INFINITE WARFARE)

  7. 3 points
    I doubt it (in tiny font size)
  8. 3 points
    TryHardUndies

    27 k/d MW Gameplay

    Why post non-Netduma gameplay on a Netduma forum?
  9. 3 points
    TryHardUndies

    In-Game Hate Mail

    I get quite a lot 😂
  10. 3 points
    ScottsGR

    DSLReports No Longer Free

    Unfortunately DSLReports is no longer offering free speed/bufferbloat tests. DSLReports No Longer Free I suggest using Fast.com or PingPlotter.
  11. 2 points
    This is really great news. I'm trying to read all the info I can find on 3.0, I know everyone is looking forward to seeing the progress that has been made.
  12. 2 points
    akadoublea

    VPN and ethernet switches

    Ah very good! I have an older nighthawk that might do the trick. It'd get all 6 on the vpn and geo-filter. I'll give that a whirl. See if I can get it to work. I might be back with more questions lol. Thank you both for your help, I greatly appreciate it!
  13. 2 points
    Ruxomar

    ANNOUNCEMENT: DUMAOS 3.0 IS HERE

    after 5 years i'm very tired of all this ... this is a very summarized version of my personal experience with this Company. in late 2015 i got the R1 which served the purpose on ADSL connection and somewhat controlled few aspects of my gaming, years went by as NetDuma empty promises over and over and Over. Yet technology improved so internet for most part as ISP had at least here in Europe comply with whatever was going on around them so connections got a lot better so wifi-routers (Netduma functionalities becomes obsolete) ... Now one day we've been informed of a partnership with Netgear which sure has some good hardware but never ever had good service nor maintenance (Software is obnoxious) on wifi-routers so to me all this sounded kinda of fishy ... but nevertheless said hey maybe they have a chance to redeem themselves, so for NetDuma which that point filled us with empty and painful waiting and a promised land that never came (the infamous new Beta version ... Anyone remembers).... Still on faith i tried extensively the xr500 and then the xr700 which both have great hardware potential but neither have demonstrated software wise any of that ... not going to sit here and list all the problems that both have cuz frankly is embarrassing especially on security side (not Netduma fault for most part .. i know) Still updates are nonexistent as Netgear customer service ... So gave away both routers to the shop and got an Asus RT-AX88U installed merlin and finally forgot it all about it ... back to the real world ... Now this PR stunt all over again in spite of all that had already happened.. once again Netgear get it first then maybe the outdated R1 and all comes down to a Beta which gives at first look of what ? Really !!! Geo fencing and few other things justify all this waiting all over again ? and you guys already working on 3.1 ... seriously... come on guys... You cannot even get a 3.0 Beta out properly and to you say we already working on 3.1.. hellooo... is this for Real !!! Not to mention all the PR from Netgear when you buy the router which none ever happened, but hey we promised you something so wait for it ... I don't know why i even wrote this post, maybe got really frustrated by this complete non sense (False Marketing and PR) or just maybe had to get it all out once and for all ... and put my R1 in his original box full of promises and wait to become what should already been ... Still Just my humble opinion on Company that has a very Unique idea/way on how to treat loyal or new customers ... So long
  14. 2 points
    After calling them yesterday they told me they'd escalate the issue and suddenly today the NAT issues are resolved. I spent 6 months thinking I had an issue with my Xr500... oh dear. For anyone else having this issue it looks like as the carriers run out of IPv4 addresses they may start using something called CGNAT, there's a piece about it here https://www.aussiebroadband.com.au/help-centre/nbn/tech-support/cg-nat/ It's not really the carriers "fault" as much as it is services still not migrating to IPV6 (sony, nintendo, microsoft)
  15. 2 points
    Newfie

    DumaOS 3.0 Beta

    It’s now a waiting game for you. Just relax and wait, at some point if you read their blog everyone will get a chance but they are keeping it for a small number to start with as it would be a tad crazy if say 100 beta testers went for it at the same time.
  16. 2 points
    Yeah i guess Warzone keeps trying to connect. Ohh well. Thanks hope the beta starts soon.
  17. 2 points
    blackfirehawk

    DumaOS 3.0 Beta

    I have Seen so far Application bandwitch QoS.. A better geofilter AdBlock with Host Lists Anything Else? I hope for improved Priority I Hope it has improves Stability and some Bugfixes too.. better ipv6 Support. We will See how it plays with mw19.. but i dont think it we will see "the Magic switch" with this broken game
  18. 2 points
    Netduma Fraser

    Sign up to DumaOS Insiders

    Hey, welcome to the forum! It should be much more stable as well as allowing us to deliver targeted fixes/updates much quicker. That's also why we're doing a beta so we can get peoples feedback on any issues they may have.
  19. 2 points
    QOS is congestion control. As for 86/86 or 70/70 it all boils down to what is best for your connection. It is not a 1 size fits all i'm afraid.
  20. 2 points
    I HAVE UPDATED IT FOR COD MW READ JUST BELOW HOPE ITS NOT TO CONFUSING BUT THIS TOPIC WAS STARTED A LONG TIME AGO It also now shows you how to traffic protize cod mw ports 2019 below I WILL POST COD MW PORTS jUST BELOW HERE these are the ones i found so far i will keep updating it with new ones here I recently upgraded to new dumar os fw and think its great but its missing one thing important i think In network monitor it now does not show you what ports the game you play is connected to uses In cod bo4 now cod mw 20019 i used this feature all the time In cod bo4 same for cod mw19 everytime you would join a new lobby it would show us new ports it was connected to. You would always be connected to two ports in every game this first port is always port 3074 udp the second was always diffrent ever new lobby you join uses diffrent ports If you stayed in the same lobby for an hour the two ports would be the same for an hour or how long you stayed in that lobby . Once you change lobbys the game changes ports it uses so you need to put new ports in traffic priortaztion I think this is why the connection keeps varying For cod mw 2019 its now three ports instead of two HERES WHY ITS IMPORTANT when i put in the ports it uses for that game in traffic priortization my hit registration would get a lot lot better i did this before on cod ww2 now i do it for cod mw2019 and it helped my hit registration .And on cod bo4 Somtimes i would do this during a game. i would be playing a game and struggling to get a kill then in same lobby same people playing i would enter those port number in and the hit registration was great easier kills same for cod mw2019 EVEN IF YOUR NOT PLAYING COD you still might need it for other games. i used it for all my other games to help get a better connection and i would like to use it in the future for new games I really dont wanna downgrade to an older fw just to use this feature as it was so GREAT SO ANY GAME YOU WANNA SEE WHAT PORTS IT USES YOU NEED THIS As some games it dosent tell you all the ports it uses I would love to use this for red dead redemption 2 online when its released soon Fraser told me if enough peole want this feture back in the firmware they would put it back in SO I JUST PUT A POLL UP SO PLEASE VOTE THANKY YOU So i am asking any who might use it before or might wanna use it in the future please vote on the poll here if you would like to see it in i future update I hope i made sence sorry for any typos And please post to say you would like it the more people who say they want it they saidthey would reinstall it if the demands there Thanks i have now edited to update for cod mw READ FROM HERE for cod mw 2019 and how to set up ports correctly From members who know how to set it up correctly below RL317 shows how to in this post below He knows more about it than i do ahe advised me how to set it up correctly Just letting you guys know i think now playing cod mw that the next update that the dumar has has to reinstall the older network monitor My hit detection \hit registration is now brilliant since i done these steps Heres why If you want your hit registration or hit detection to be great read this When playing cod mw the game uses 3 ports to play thats if you want godd hit detection \hit registration The first is port 3074 this is on ps4 i think its 3075 on xbox but i am not sure i dont know about pc The second port stays the same untill you restart the game i think this is the data centre or either matchmaking The 3rd port is changes every new game this is the dedi or peer your playing on Thats why you see new people every game and thats why you do good one game but not the next Thats because you changed dedis and the ports have changed So thats why you need 3 ports every game the first is 3074 the send is the matchmaking or data centre the 3rd is for the game mode you play Atm i am making a list for the ports it uses Just letting you know you can do this yourself to see what ports is needed but you have to downgrade to the older firmware well thats on netdumar1 I dont know about other routers Also this cane be done if you have a router with openwrt on it You would have to ask admins as i dont know anything about the other routers Heres a way to put the ports in traffic priortization Source 3074-3075 destination 30000-45000 udp rule 1 Source 30000-45000 destination 3074-3075 udp rule 2 Source 3074-3075 destination 3100-3500 udp rule 3 not nessasery optional Source 3100-3500 destination 3074-3075 udp rule 4 not nessssery optional HERES A LOAD OF PORTS TH GAMES COD MW USES Heres is a copy of my upnp settings screen after playing a losd of cod mw 2019 192.168.88.119 9308 9308 192.168.88.119 UDP DemonwarePortMapping 3074 3074 192.168.88.119 UDP DemonwarePortMapping 3163 3074 192.168.88.55 UDP DemonwarePortMapping 3153 3074 192.168.88.55 UDP DemonwarePortMapping 3172 3074 192.168.88.55 UDP DemonwarePortMapping 3184 3074 192.168.88.55 UDP DemonwarePortMapping 3155 3074 192.168.88.55 UDP DemonwarePortMapping 3123 3074 192.168.88.55 UDP DemonwarePortMapping 3102 3074 192.168.88.55 UDP DemonwarePortMapping 3148 3074 192.168.88.55 UDP DemonwarePortMapping 3111 3074 192.168.88.55 UDP DemonwarePortMapping 3124 3074 192.168.88.55 UDP DemonwarePortMapping 3131 3074 192.168.88.55 UDP DemonwarePortMapping 3150 3074 192.168.88.55 UDP DemonwarePortMapping 3192 3074 192.168.88.55 UDP DemonwarePortMapping 3176 3074 192.168.88.55 UDP DemonwarePortMapping 3125 3074 192.168.88.55 UDP DemonwarePortMapping 3129 3074 192.168.88.55 UDP DemonwarePortMapping 3177 3074 192.168.88.55 UDP DemonwarePortMapping 3115 3074 192.168.88.55 UDP DemonwarePortMapping 3162 3074 192.168.88.55 UDP DemonwarePortMapping 3116 3074 192.168.88.55 UDP DemonwarePortMapping 3147 3074 192.168.88.55 UDP DemonwarePortMapping 3134 3074 192.168.88.55 UDP DemonwarePortMapping 3133 3074 192.168.88.55 UDP DemonwarePortMapping 3100 3074 192.168.88.55 UDP DemonwarePortMapping 3109 3074 192.168.88.55 UDP DemonwarePortMapping 3095 3074 192.168.88.55 UDP DemonwarePortMapping 3127 3074 192.168.88.55 UDP DemonwarePortMapping 3190 3074 192.168.88.55 UDP DemonwarePortMapping 3117 3074 192.168.88.55 UDP DemonwarePortMapping 3126 3074 192.168.88.55 UDP DemonwarePortMapping 3084 3074 192.168.88.55 UDP DemonwarePortMapping 3182 3074 192.168.88.55 UDP DemonwarePortMapping 3138 3074 192.168.88.55 UDP DemonwarePortMapping 3175 3074 192.168.88.55 UDP DemonwarePortMapping 3171 3074 192.168.88.55 UDP DemonwarePortMapping 3165 3074 192.168.88.55 UDP DemonwarePortMapping 3180 3074 192.168.88.55 UDP DemonwarePortMapping 3169 3074 192.168.88.55 UDP DemonwarePortMapping 3085 3074 192.168.88.55 UDP DemonwarePortMapping 3105 3074 192.168.88.55 UDPDemonwarePortMapping 3194 3074 192.168.88.55 UDP DemonwarePortMapping 3074 3074 192.168.88.55 UDP 192.168.88.55 9308 9308 192.168.88.55 UDP Btw i noticed everytime i reset cod mw 2019 these more was added they were added one at a time So i thought these ports are needed as well but now i think there optsinal Here are the ports network monitor shows are in use for cod mw 2019 i will add more when i find them 30410 35710 30350 31300 35300 37160 31350 36360 32700 32710 39860 38280 39500 42420 43300 30040 30080 32560 31080 32540 30110 30020 30030 30070 30230 30500 30600 31030 32930 33640 34260 36050 36290 36930 39550 43610 43840 44790 30020 :30010 :32680 32310 :32350 :30190 :34790 :34790 :30070 30100 32560 :32580 30060 33420 33420 40820 36800 32310 30550 30520 30130 30060 35310 32550 30040 30310 30160 32590 39300 32460 32490 32550 35800 3258032570 These ports made into a range by east so thank you to them They have a brilliant guide on these forums i recken you guys read it I think its the best one Please if you found this helpful please vote this thread was started over a year ago and we are still have no clue if there gonna bring it back SORRY IF I DOUBLE POSTED A FEW PORTS TWICE BUT I HAVENT HAD TIME TO EDIT THIE LIST YET BTW ANY PORTS LISTED BELOW HERE ARE FOR OLDER COD But you can still see how the people use traffick prortization correctly you just input your ports instead of the outdated ones
  21. 2 points
    If you get better routing to the VPN server and then to the game server rather than direct to the game server then it could improve your stability and perhaps ping.
  22. 2 points
    Netduma Alex

    Ivacy VPN Issue

    Welcome to the forum! What you need to do is go to Ivacy and get an OpenVPN config file. Most VPN providers will give you these. Now, go to Hybrid VPN on your XR500, press Add VPN and go to the advanced tab, now you need to open your ovpn config file in notepad and copy/paste the text into the Advanced field. Now you should be able to connect, you can add devices for the VPN to affect in the panel on the right.
  23. 2 points
    I restarted the game after changing the settings and it started to work.
  24. 2 points
    The server on the West Coast USA is a whitelisted server, either the game or the console need this server to authenticate, connecting to whitelisted servers is normal and they don’t effect gameplay as game servers are separate. You can tell a whitelisted server as it has a circle around it. I would set your range to about 1000km and also use ping assist. You can find out more about the geofilter and ping assist in these articles. http://support.netduma.com/support/solutions/articles/16000077072-dumaos-optimal-settings-guide-geo-filter http://support.netduma.com/support/solutions/articles/16000087579--dumaos-optimal-settings-guide-ping-assist
  25. 2 points
    Chaiyoabc

    Defeat MW Lag Compensation!

    How To Make MW Playable, My Sad Conclusion Before everyone comes in guns blazing, hear me out. I've spent years and hundreds upon hundreds dollars trying to optimize my gameplay. Higher bandwidth internet (200/20) top of the line modems (SB6183, SB8200, CM1000) high end routers (X4S, Netduma R1, X6S) expensive lan cables, and of course monitors, scufs, headsets. Way too much money to summarize. Nothing was helping. One day the game is enjoyable, the next I feel like a day one noob. Some days the connection feels solid, the next I feel like im on dial up. Until one day I thought about what's making my gameplay bad APART from SBMM. Lag comp. We definitely need it to make real time, online PVP work, obviously. But the servers cater to poor connection quality a little too much. It gets worse and worse each year. So i had the thought: How about I reduce my upload speed! The server will take pity one me! .... This was snake oil. One game the gameplay feel super smooth, like what it should be. The next, i felt like trash. Lol. So throttling didnt work... Or at least, was highly inconsistent. Then I tried the unthinkable. Play on my phone's wifi hotspot. I thought the gameplay would be jittery, extremely laggy, with possible disconnects. I. WAS. WRONG. I set my hotspot to a 5G bandwidth, restarted my phone to clear the cache and free up RAM. Disabled a few apps running in the background and closed a few more. I connected it to my xbox then started up MW. You will have a Strict NAT, there is no way around that. You will only be able to connect to Open NAT players. But the biggest difference I noticed: The Gameplay. I went from the little timmy with the reaction time of a snail to seeing people first and being able to react to people. And my bullets were hitting, better than my cable connection. Lol. Long story short, I made an alternate account to strictly play on my hotspot account, a legit account. My SPM double and my KD was higher. I rush nonstop so I do die a lot but gunfights felt even. Im dropping 30 kills a game, roughly. Not the best pubstomper but the game is enjoyable! Conclusion: Don't waste hundreds of your hard earned money buying modems, routers, and various other equipment to make a game play better. Especially when the game DOES NOT care about ping, jitter, or bandwidth. Hook up to your phone's hotspot and join the side Activision seems to care about more - The Lag Comp Crew. Side note - there are apps you can disable to free up RAM, and a few settings to change on your phone to make the gameplay ultra smoother. I usually have 2.7 gigs free without optimizing. After, 3.8 gigs of RAM free. I might make a YT video showcasing my gameplay for proof. copied from one guy from reddit
  26. 2 points
    Yeah mine is just sitting on the ledge in my man cave gaming room. Probably just going to retain some of money that I spent on it! I bought the router that sable has asus ac88u. I set like 2 settings on that and never look at it again!
  27. 2 points
    purpleandgold33

    Defeat MW Lag Compensation!

    It could be that everyone has charter in my area too with the corona bs and sucking up all of the bandwidth. Its not a huge issue just occasional while watching twitch the stream buffers. My gaming experience is decent and I don't need to stare at my settings. I just set the 2 things I need to set and thats it. Probably gonna sell the XR. Was holding on to it just in case the the update was monumental which I doubt.....If it ever comes out, lol. I really don't care anymore!
  28. 2 points
    I'm not going to worry about it anymore and just leave HT160 disabled. I'm impressed with this routers performance, especially over my old Linksys 1200. Thanks for all the input everyone, I appreciate it. Be well and be safe!
  29. 2 points
    That server handles a TON of local island traffic and is really a tough server to consistently game on. What I did was (and this worked beautifully) Deny the surrounding Miami Peer/Dedicated servers and force either a Georgia, Missouri, or Illinois server every game, instead. If you traceroute your ISP hops, to their source - then place your Geo-Filter location to the end of your trace you'll notice a more fluid connection. Give it a try. It may take you longer to search for a match, but it's entirely worth it.
  30. 2 points
    vShikko

    Packet Loss in Cod

    I went through weeks of notes & settings and hours upon hours of testing when I purchased my Duma R1 back in the day. Tweaking your settings takes some time, so take notes what works for your gigabit asymmetrical connection. Make sure you backup your settings every couple weeks. You'll find a wealth of knowledge here, Welcome!
  31. 2 points
    Sukhi

    Packet Loss in Cod

    I can give that a try. Let you know my finding...I actually disable the QOS and will try COD today and will so see if I messed up how i set up the qos.
  32. 2 points
    Try these manual rules without DumaOS Games and Games Console enabled. Source Port: 3074 (start and end) Destination Port: 30000 (start) - 45000 (end) Protocol: UDP
  33. 2 points
    Sable

    In-Game Hate Mail

    Faggot cheater lol
  34. 2 points
    Sable

    Defeat MW Lag Compensation!

    Nuke I got Last night on shoothouse.
  35. 2 points
    Hi Fraser, I would like to inform you that server mislocation still hasn't been fixed. I have made update in this thread. please fix it. Thank you
  36. 2 points
    hola Qillp! Mi opinion es que si merece la pena, ya solo con el Qos mas avanzado que trae te permite priorizar un dispositivo sobre otros de mejor forma que con el original, yo lo e utilizado con todo tipo de conexiones y siempre me a funcionado bien, 1000, 300 y actualmente con 600Mb. El unico pero que le encuentro es que si usas pppoe se produce cuello de botella, pero eso ocurre igualmente con el original, por todo lo demas de maravilla, ademas pinta bien lo que traiga la nueva actualizacion! Un saludo!
  37. 2 points
    Snake Oil springs to mind.
  38. 2 points
    Sable

    Tactical Nuke on Vacant - MW

    Managed to pull this off last night, camped a little toward the end to ensure the nuke.
  39. 2 points
    I normally reboot the router through the 'info' popup in DumaOS. I really appreciate your help, especially since this doesn't seem to be DumaOS related. I'll keep messing around - maybe I can try factory re-setting the modem and starting again. I have a couple older routers lying around I'll test out as well, try to narrow down the issue. Thanks for your help Fraser!
  40. 1 point
    Nyhteshade

    Geo-filter not working

    It crossed my mind after looking through some topics, but I was waiting for the go ahead lol. I'll try it and get back. Thanks.
  41. 1 point
    I will do that, I have to much configured ATM and really don't have the time to factory reset everything and start over.
  42. 1 point
    Netduma Alex

    Lag and inconsistent packages.

    Well it sounds to me like it might be down to the Fritzbox not opening ports properly for the XR500. If ports have been forwarded correctly from the Fritzbox, they should remain open for the XR500 and be available for forwarding to anywhere. I don't know why this would be happening but it's probably a communication problem between the two routers. As a test, you could put your console into the DMZ of the XR500 temporarily and see if your ports remain open permanently. If they do remain open, it suggests a problem with the XR500's port forwarding. If they don't remain open, it suggests a Fritzbox problem.
  43. 1 point
    Hey, welcome to the forum! pollution has answered your question perfectly. I would say that a console doesn't use much bandwidth for gaming, less than 1mbps so it is probably not necessary to set an allocation anyway.
  44. 1 point
    Okay sorry for late reply it did it in that order and nothing worked. But i can know just use the R1 and connect so i think it was just the servers on the games with is annoying since i wasted both of you guys time furthermore thank you guys both for the help .
  45. 1 point
    Ranger

    Cod port forwarding help

    @Netduma Fraser I have an XR500 with VM350 which I connect to the VM HUB3 in modem mode with all devices connected to the XR500. Is this the best set up? I can’t see the DMZ option In the VM HUB3 when in modem mode...
  46. 1 point
    Knomax

    Lag vs Lag Compensation

    I have every time the right speed settings in SQM...so yes perfect results.
  47. 1 point
    Hey, welcome to the forum! I'll get Alex to double check your signup and send it out to you.
  48. 1 point
    I created an account here just to say thank you. I've had the same issue ever since I purchased the XR500. I even bought a new modem too because it never comes back up after a reboot. It's a household joke that every time I say I have to reboot because everything slowed down, the family makes plans to do other things for 3-4 hours. I don't know why but I never thought to try and boot them up simultaneously. I would always go through the process of boot modem first, then router and just accept it's a half day and a dozen reboot process. I was an hour into this reboot when I saw this. I rebooted them both together and they came right up. I am very grateful you posted this. Saved us several hours of headaches during COVID
  49. 1 point
    Bert

    COD MW Packet Burst

    Titan 2 and CM have roughly the same functionality. It's actually really simple, the aim assist script just makes your character strafe side to side very quickly.
  50. 1 point
    This is only the beginning guys 😉 It get's even better. I can't wait until they share more.
×
×
  • Create New...