Boldshoter30

after setting the MTU on a console make sure to do a Console speed test to apply the MTU or restart the console, after setting the MTU on the router it doesn't require a reboot, just apply save settings

you can check google on how to find it with a Mac command prompt tool I forget what its called, normally 1472 MTU, is good for FPS, Call of duty, Halo, Fortnite games, make sure you set the MTU in the routers WAN page and your preferred gaming console or pc all the same MTU 1472

I noticed a improvement with latency and not rubber banding being shot around corners I have tested MW2 on several occasions other servers, with the MTU set at 1472 on the R2, my packets were fragmented at 1500 so I went with 1472, and left it alone, you can test your MTU from this link to download TCP Optimizer : https://www.speedguide.net/downloads.php , look for the least fragmented mtu size and set according in your router of choice, but lower don't mean better unless instructed by TCP optimizer make sure you run it as administrator on your desktop computer to test, I have noticed as well its not a placebo, it works and has been proven by hundreds of people to help with latency, and packet loss, I tested a server thousands of miles away which I would lag bad on which hit reg was raised, but seemed more stable in game, didn't die in BS ways, its not a solve all fix all, or will fit everyone's isp internet setup, so test according, some speculate that MTU does little to nothing, which also been proven to help, may not be consistent, based on your bufferbloat, incorrect QOS, running wifi for gaming console, or pc, or other unknown issues packet loss on ISP side, to many devices on network,

I don't see if there is a GTA (series) Priority on 3.3.347 if it could be added in the future, at a later date for GTA V, with the gunfights you get into with people, I don't know if it would even make a impact to the game for online, and later in the future to improve on it for for GTA VI when it releases.. GEO FILTER may not be suitable for the game with the players being from all over the world. no Idea if GTA has a lot of servers for online lobbies.

I was apart of the original beta testing for the XR500 when it was on the Netgear site but I guess moved over here to Netduma.... @Netduma Fraser

can I be added to the XR500 beta please? @Netduma Fraser

if any Technical Netduma Admin @Netduma Frasercan give me some technical specs for all the chip sets sizes for the R2 preferably the CPU I posted pictures below courtesy of @KindaBustedfor the USB fans that I have ordered about to order some thermal stick on heat sinks I know with opening the router Voids warranty my warranty has been long gone anyone can tell me what you guys think I know it won't be a big huge improvement in performance with temperatures but can't hurt but try if I break it that's on me but on that note I built my own gaming pc so this will be cake 😉

thank you Fraser

wondering if the network monitor dpi has been improved for the ps5 for the next iteration firmware update for the R2 in the future for MW2 & other games bugs me to see no gaming in network monitor even though the traffic Prioritization light turns on for classified games and I had a admin saying in the past there is a few tweaks to the backend QOS side of dumaos that will be a improvement for the next firmware

and I tried again after factory resetting my XR500 with the pin hole still shows the Default VLAN ""INTERNET"" but comes up blank with no lan ports or wifi to select one port might be a bug I guess

the internet VLAN on top I click it to edit to add a port the one enabled by default I go to edit but no lan ports are showing up or wifi the one with the VLAN ID 4

can't tag anything in the internet VLAN page it's blank what am I doing wrong I already setup vlan tagging on my Edgerouter-X

finally Retiring my Netduma R1 possibly selling it in a garage sell since it was just sitting in a box in my closet not being used keeping the Netduma R2 and my Netgear XR500

I will Fraser 🙂🙂 will just patiently wait thank you as well with being more on you tube with the progress of updates etc to let the Netduma Community know of progress on firmwares and features

would it be a possibility in the future of DumaOS to where you could click on the DPI page on DUMAOS and sniff applications used by devices beside a range of ports outbound and inbound or just game console ports, but create groups of applications for high priority dropdown from 0 to 10 media socials gaming 0 being the highest 10 being the lowest priority where you open device on dpi page will automatically show on PS5 Sony Playstation CallOfDuty and Xbox click on it and add it to a group highest priority dropdown like 0 everything else could be whatever anyone selects Firewall settings would help with select ports or protocols applications inbound local outbound not saying in any way to copy and paste ubiquiti's ideas that are trademarked and copyrighted but I do enjoy a more advanced way of tinkering not just qos sliders and flower device applications I'm sure it would also costs thousands of more money and hours for R&D to develop a application sniffer in DPI for DumaOS I noticed with everything I have done on edgemax I got my ping on Bo4 ps5 from 30ms to 25ms ttk seemed to lower a bit during that game but got into a further distant server or peer what would be 60ms was 45ms steady not bouncing from 40's to 60's still was stable but NETDUMA ADMINS and mods and other netduma users can chime into my opinions of improvements or I'm just thinking over my head 🙂🙂