Aspect of Wrath

The packet loss is from the servers, i have no packet loss but everytime cod comes out with the new content there is packet loss for a week due to overloaded servers.

Do i still need to have gaming as priority or is it not needed if i change my settings to this?

The firmware you have to download manually, you can find it in the forums.

You are right the hubs are really bad atm im hoping the rumors about them adding bridge mode in the future are true.

Yes but i unplugged power from both the hub and R3 and waited 5 mins.

So i can forward ports and not double nat. pppoe connection was ok but too much latency in games, dmz was ok but it was not as good as Admz. Admz gave me the proper speeds compared to pppoe and the connection for multiplayer was way better.

Ill try this

The wan IP on the r3 did change to match the hub but i was not getting internet. I used to be able to connect using admz but now it stopped working.

Turning on Advanced DMZ in the Hub configures one machine on your internal network, selected by MAC address, with the public IP address of your router. When i try to put R3 in ADMZ it gets no internet connection, im trying to figure out how to do a static route because i read that puting destination 0.0.0.0/1 will help fix issue.

Trying to get isp bell advanced dmz to work but when i set up admz on R3 i get no internet. I was told to do a static route destination 0.0.0.0/1 but i have no idea how to do that on R3.

Try turning off stable ping on geo filter if you care more about lower ping because stable ping usually raises ping by 10 or more.

Try logging in using 192.168.77.1 on the web browser.

From what I've read it sounds like they figured out what was causing the issue, as for when I do not know but hopefully soon means sometime this month. I am still waiting to update R2 firmware coming "soon" said last year lmao.

Restart router or power off then on again, this issue is going to be fixed next firmware.

Did you rollback firmware or just uploaded the same firmware?