Jump to content

wrice4

Members
  • Posts

    5
  • Joined

  • Last visited

Basic Info

  • DumaOS Routers Owned
    Netduma R1
  1. Great, thank you. Would upgrading to a xr500 help at all with anything or not really since I only have 150 down and 10 up?
  2. Rebooting caused the cpu usage to range from 60-90% usage now. I have 16 things connected right now. Mostly things like firestick, directv, xbox (singleplayer), none of those are using any decent amount. Should I check Always or WHen high priority traffic detected for ANTI-BB? See attachments.
  3. Hello, I have a r1 netduma: Frimware: 2.1.3.29 DumasOS: 1.3.29 I am having constant streaming issues with Mixer maybe its my QOS or maybe its the router. My CPU usage in dumOS is a constant 90-100% even with just a webpage open. I have no devices on Geofilter and I have tried turning off QOS and it doesn't make a difference in cpu usage, so how can I found out where all the usage is coming from? Right now I have this webpage open and dumaOS and I am at 100% cpu usage on dumaOS constantly for the past 10 minutes. 2nd point: I have 10mb upload speed and I usge 6000 bitrate when streaming. Should I set my QOS to 100% sliders, and put my stream pc at 75% upload device bandwidth? Or should I set the sliders to 80% and do my stream pc at 90% bandwidth allocation? I am at least needing a constant 6000 bitrate to my stream as well as a little bit for my gaming pc. Usually when I stream no other devices need to be using any data. Currently I have the sliders at 80% and "when high priority traffic detected" is checked.
  4. Understandable. I have just used a powerline adapter, over the years, so I didn't have to run a cord throughout my house. For my pc, I have ran a 30ft ethernet cord under my house, from my living room to my pc. Would it have any affect on this if I used that cord, put a ethernet hub on the end, by my pc, and just used those 4 ports to split off of the LAN line?
  5. So I have had my netduma router for about a year or so now. I have also had my Zyxel powerline adapters since before the netduma. I have never had a problem before, until about 2 weeks ago and I can not figure it out. Since I have had my duma, I manually input my download and upload speed and did not allow the netduma to auto adjust settings. Two weeks ago I upgraded my internet, input the new speeds and then clicked yes for auto settings. Ever since then, whenever my ps4, or xbox one, is connected to LAN, through the powerline adapter, it works for 30min-1hour and then the internet shuts off from it. It disconnects me from xbox live/PSN and when I go to test my settings, the ip address is successful and then internet and everything else that follows is failed. I am not allowed to get back on the internet with my xbox/ps4 until I unplug the powerline adapter, wait 2 min, and then plug it in again. This problem does not exist if I run a long cable to the router, bypassing the powerline adapters. I have done some testing, and whenever this problem arises and I switch to automatic ip/dns/etc it switches my ip to something weird like 164.xxx.xxx.xxx. The only thing I can think of is when I hit automatic settings in netduma then it change something and I don't know how to fix it. Here are some screenshots of my settings: https://gyazo.com/e111f68b919d9d85d2c6dc1779986f29 https://gyazo.com/3363ad33e27418a72986069a1668b2ee https://gyazo.com/b948ca5dcbd90fb2b88c540f781df530 https://gyazo.com/6d7523e0e23b6f8e4fe47c1108552a91 I hope I can somehow fix this issue. Thank you for the help. R1 debug version 1.03.6h Download 150mbps Upload 10mbps ISP Modem to netduma (wireless off) to Archer C9 for wireless network. All the LAN connections are connected to the netduma.
×
×
  • Create New...