Jump to content

Destiny 2 Bell setup for xr500 and R2


Aspect of Wrath
 Share

Recommended Posts

Updated settings for xr500 and R2 1/2/2022

My setup

Monitor: benq ex2510 

Console: Ps5

control: SCUF with metal paddle

 

Bell modem router Settings: (skip to netduma settings if your not with this ISP)

ISP: Bell Canada. Bell homehub 3000 settings:

1. Factory reset homehub 3000 to wipe existing pppoe credentials off HH3000

2.type in 192.168.2.1 on a web browser to login to bell

3. disable wifi on HH3000 and disable WPS, upnp, sip alg, DLNA, and everything else but(leave DHCP enabled its for tv) 

4. plug your own router's WAN to any of the HH3000's Lan

5. Configure PPPOE on the Netduma xr500 or the netduma R2, go to settings and internet setup. change to PPPOE and input Bell User and pass (user starts with b1) and save. 

 

 

NETDUMA settings:

Geo Filter device: Add console, and use the correct profile for whatever game you play(keep lowering the distance if you find games laggy)

 

Anti bufferbloat xr500: Set correct internet speed, set to when high priority is detected. For bufferbloat lower % for download by 10 until connection benchmark test says its stable, then do the same with upload.

 

Anti bufferbloat R2: use auto bufferbloat setup

 

Bandwidth allocation: Share excess enabled on both download and upload and give your console 30% download and 30% upload or 90% both(best). The other way is to set badwidth allocation to applications and give gaming 90%.

 

Traffic prioritization: Keep dumaOS classified games checked(you do not have to manually prioritize your console) OR you can disable DUMAOS classified games, then click on device(ps5) and set as games console.

 

Xr500 Wan setup:

Disable port scan checked

DMZ: use on console only not pc

Respond to ping unchecked

Disable igmp proxying unchecked

Mtu Leave it alone

Nat filtering Open

Disable SIP ALG checked

 

R2 wan setup: disable ipv6 and everything else in that page.

 

Advanced settings UPNP: enabled(If you are using than 2 consoles and you find that both do not have open Nat, set Nat filtering to open)If UPNP is not working disable it and use portforward or default dmz server under WAN. 

Edit: setting NAT to open reduces lag just leave it open. 

 

Lan setup: put consoles IP under address reservation. 

 

Settings USB storage: uncheck enable media server.

 

Ps5 Settings:

 

Resolution: automatic

RGB: Automatic for tv, rgb full for monitor(monitor has to be set to 0-255 on color settings for full and 16-235 for limited).

HDR: off

Deep color: off

Display area: smallest

System settings: only thing checked is limit number of items on screen rest unchecked

 

Ps5 network settings: set auto router will do the rest

 

Monitor Settings:

look for game mode on your tv/screen and if you have an option for response time set it to fastest.

If you have questions msg me.

 

Link to comment
Share on other sites

  • 3 weeks later...
On 9/26/2018 at 3:48 PM, carl0024 said:

Im assuming you were in a party of 6? Just wondering if you have to be the party leader while you're fiddling around geo filter? do you have geo on regardless someone else in your party is the leader?

you have to be the one searching for a match or else geo filter will not work.

Link to comment
Share on other sites

  • 3 weeks later...
  • 2 weeks later...
  • 1 year later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...