duqjeep2010 Posted July 6, 2018 Share Posted July 6, 2018 My router is not picking up the internet. I have rebooted my ISP router and the netduma numerous times. I swapped the CAT5 cable between the two still nothing. When I reboot the netduma sometimes I will have no lights, sometimes I will have just the port 1 activity light other times I will only have the wifi light. Not sure what is going on. Tried a factory reset and still nothing. Any suggestions? Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted July 6, 2018 Administrators Share Posted July 6, 2018 Hey, welcome to the forum! Do you have the R1 or the XR500? Link to comment Share on other sites More sharing options...
duqjeep2010 Posted July 6, 2018 Author Share Posted July 6, 2018 Hey, welcome to the forum! Do you have the R1 or the XR500? I have the R1. I also tried a DLink modem I had and still no internet, however, I Can get online with my ISP and DLink Modems. Link to comment Share on other sites More sharing options...
duqjeep2010 Posted July 6, 2018 Author Share Posted July 6, 2018 I am also not getting a WAN IP when using either modem. Link to comment Share on other sites More sharing options...
Netduma Staff Netduma Jack Posted July 6, 2018 Netduma Staff Share Posted July 6, 2018 I am also not getting a WAN IP when using either modem. Welcome to the forum! The first thing I'd recommend is switching out the cable between your Netduma and the modem. The cable could be faulty and causing the issue. Do you require PPPoE on your connection? If so you'd have to input your details on the WAN settings page on the Netduma. Can you access the R1 interface? Do you see the R1 SSiD (network) and can you access the Internet on wired devices, or is this just wireless? Thanks! Link to comment Share on other sites More sharing options...
duqjeep2010 Posted July 6, 2018 Author Share Posted July 6, 2018 Welcome to the forum! The first thing I'd recommend is switching out the cable between your Netduma and the modem. The cable could be faulty and causing the issue. Do you require PPPoE on your connection? If so you'd have to input your details on the WAN settings page on the Netduma. Can you access the R1 interface? Do you see the R1 SSiD (network) and can you access the Internet on wired devices, or is this just wireless? Thanks! I switched the cable no help. I do not have my ISP router in bridge modem because I factory reset it too so no PPPoE required right now. No traffic lights on the R1 side but there are traffic lights on my ISP Router/Modem. I can get to the R1 Interface no internet wired or wireless. Link to comment Share on other sites More sharing options...
Administrators Netduma Admin Posted July 7, 2018 Administrators Share Posted July 7, 2018 Have you factory reset the R1 yet? If not, please could you. Go to 'Settings' then 'Miscellaneous'. This should will fix any issue on the software side. After resetting the WiFI password will default to 'netdumar1'. Thanks. Link to comment Share on other sites More sharing options...
duqjeep2010 Posted July 7, 2018 Author Share Posted July 7, 2018 Yup did a factory reset still nothing Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted July 8, 2018 Administrators Share Posted July 8, 2018 Do you know if your ISP allows 3rd party routers? If not then I'd look up your specific model to see if theres a workaround Link to comment Share on other sites More sharing options...
duqjeep2010 Posted July 8, 2018 Author Share Posted July 8, 2018 Do you know if your ISP allows 3rd party routers? If not then I'd look up your specific model to see if theres a workaround It has been working for 6 months it just stopped working the other night. When I woke up no internet. Link to comment Share on other sites More sharing options...
Netduma Staff Netduma Jack Posted July 9, 2018 Netduma Staff Share Posted July 9, 2018 I'd recommend a hard reset. To do this, switch off the modem and Netduma. Wait 5 minutes then switch on your Modem. Wait another minute then switch on your Netduma. You may have to perform this step multiple times - this can restore communication between the Modem and the Netduma since that is likely where the issue lies. Just to clarify, you do receive Internet access (wired and wireless) through your Modem? Run an IPconfig on a wired PC and post the results here. To do this, open Command Prompt (on a Windows PC) and type 'ipconfig' before hitting 'enter'. Link to comment Share on other sites More sharing options...
duqjeep2010 Posted July 10, 2018 Author Share Posted July 10, 2018 I have done several hard resets and even switched modems. Both modems provide internet access wired and wireless. I'd recommend a hard reset. To do this, switch off the modem and Netduma. Wait 5 minutes then switch on your Modem. Wait another minute then switch on your Netduma. You may have to perform this step multiple times - this can restore communication between the Modem and the Netduma since that is likely where the issue lies. Just to clarify, you do receive Internet access (wired and wireless) through your Modem? Run an IPconfig on a wired PC and post the results here. To do this, open Command Prompt (on a Windows PC) and type 'ipconfig' before hitting 'enter'. Link to comment Share on other sites More sharing options...
Netduma Staff Netduma Jack Posted July 10, 2018 Netduma Staff Share Posted July 10, 2018 I've replied to your email and we'll take it from there. Thanks! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now